@bydga/homebridge-garage-door-shelly1 NPM

homebridge-garage-door-shelly1

This work is forked from https://github.com/jmaferreira/homebridge-garage-remote-http.

Fixed a bug, where calling "close the garagedoor" on already closed door actually opens them. - by Bydga

Description

This homebridge plugin exposes a web-based garage opener to Apple's HomeKit. Using simple HTTP requests, the plugin allows you to open/close the garage. It works as a general purpose HTTP client for any relay, but it works particularly well with a Shelly 1 relay.

Installation

Install Homebridge.
Install the plugin by running npm install -g homebridge-garage-door-shelly1 or by searching for homebridge-garage-door-shelly1 on the plugins tab if you are using Homebridge UI or Hoobs.
Update your Homebridge config.json accordingly.

Configuration

NOTE: Don't forget to update shelly_ip to the IP address of your Shelly relay.

"accessories": [
     {
        "accessory": "GarageDoorOpener",
        "name": "Back door",
        "http_method": "GET",
        "openURL": "http://shelly_ip/relay/0?turn=on",
        "closeURL": "http://shelly_ip/relay/0?turn=on",
        "autoLock": false,
        "autoLockDelay": 60,
        "openTime": 21,
        "closeTime": 17,
        "polling": true,
        "pollInterval": 60,
        "username": "garage",
        "password": "Mh4hc7EDJF8mMkzv",
        "manufacturer": "BFT",
        "model": "SCE-MA (Board)",
        "statusURL": "http://shelly_ip/status",
        "statusKey": "$.inputs[0].input",
        "statusValueOpen": "0",
        "statusValueClosed": "1",
        "debug": "false"
    }
]

Options

Core

Key	Description	Default
`accessory`	Must be `GarageDoorOpener`	N/A
`name`	Name to appear in the Home app	N/A
`openURL`	URL to trigger the opening of your garage	N/A
`closeURL`	URL to trigger the closing of your garage	N/A

Optional fields

Key	Description	Default
`openTime`	Time (in seconds) to simulate your garage opening	`10`
`closeTime`	Time (in seconds) to simulate your garage closing	`10`
`autoLock`	Whether your garage should auto-close after being opened	`false`
`autoLockDelay`	Time (in seconds) until your garage will automatically close (if enabled)	`20`
`switchOff`	Closes the garage immediately without animation. For IR remote control use.	`false`
`switchOffDelay`	Time (in seconds) until your garage will automatically close without animation (if enabled)	`2`
`polling`	Whether the state should be polled at intervals	`false`
`pollInterval`	Time (in seconds) between device polls (if `polling` is enabled)	`120`
`statusURL`	URL to retrieve state on poll (if `statusField*` options are not set, expects HTTP response body to be `0` or `1`)	N/A
`statusKey`	JSONPath that identifies the property that contains the status of the door (e.g. `$.inputs[0].input` is the default for Shelly 1)	`$.inputs[0].input`
`statusValueOpen`	Regex that will match the `open` state of the relay status (e.g. `open`)	`0`
`statusValueClosed`	Regex that will match the `closed` state of the relay status (e.g. `closed`)	`1`
`statusValueOpening`	Regex that will match the `opening` state of the relay status (e.g. `opening`)	`2`
`statusValueClosing`	Regex that will match the `closing` state of the relay status (e.g. `closing`)	`3`

Additional options

Key	Description	Default
`timeout`	Time (in milliseconds) until the accessory will be marked as Not Responding if it is unreachable	`3000`
`http_method`	HTTP method used to communicate with the device	`GET`
`username`	Username if HTTP authentication is enabled	N/A
`password`	Password if HTTP authentication is enabled	N/A
`model`	Appears under the Model field for the accessory	plugin
`serial`	Appears under the Serial field for the accessory	version
`manufacturer`	Appears under the Manufacturer field for the accessory	author
`firmware`	Appears under the Firmware field for the accessory	version
`debug`	Display debug messages on Homebridge log	false

State key

State	Description
`0`	Open
`1`	Closed
`2`	Opening
`3`	Closing

Wiring

Shelly 1 wiring

More information at https://savjee.be/2020/06/make-garage-door-opener-smart-shelly-esphome-home-assistant/

Videos on wiring

Door open/closed sensor

In order to know for sure if your gate is open or closed you need to install a Reed Switch sensor connected between L and SW (order is irrelevant). These cost between €2 and €5.

Reed Switch

For Shelly 1 and a normally open reed switch (NO) the following options need to be set:

"accessories": [
     {
       ...
		 "statusKey": "$.inputs[0].input",
		 "statusValueOpen": "0",
		 "statusValueClosed": "1"
		 ...
	  }
	]

For a normally closed switch (NC), use:

"accessories": [
     {
       ...
		 "statusKey": "$.inputs[0].input",
		 "statusValueOpen": "1",
		 "statusValueClosed": "0"
		 ...
	  }
	]

homebridge-plugin homebridge garage garagedoor home remote shelly shelly1

jsonpath request

@infinitebrahmanuniverse/nolb-_byd @everything-registry/sub-chunk-149 @zalastax/nolb-_byd

1.1.5

4 years ago