@jdp1g09/node-red-iss-data-streamer NPM

International Space Station Data Stream

Screenshot of Node-RED with the ISS Data Stream node in use

This is a Node-RED node that wraps the I.S.S. Lightstreamer feed, emitting real-time telemetry from the International Space Station.

It was heavily inspired by the ISS Mimic Project, and this node can be used in Node-RED to create your own ISS Mimic and Dashboard.

How to use

Install Node-RED
Add this node via the Node-RED Palette Manager
Drag the ISS Data node onto your flow
Wire it to a "debug" node, and you can then see the output in the Node-RED debug panel

Node Output

The node can output three different types of data:

Raw: The raw data from the Lightstreamer feed, with no modifications
Formatted: Each feed has a designated type, this output type will format the data into a more human-readable format, so numbers will display as numbers, or any feed with a key map (e.g. 0=OFF, 1=ON) will output the human-readable format
Both: This outputs a JSON structure with the keys raw and formatted, so you can access both data types

Examples

You can find example flows inside the /examples folder. One for a basic debug output, and another for a more advanced dashboard that uses FlowFuse Dashboard:

With the following flow (included in /examples)

Example FlowFuse Dashboard showing some data feeds from the International Space Station

You will build the following Dashboard:

Example FlowFuse Dashboard showing some data feeds from the International Space Station

Data Feeds

The data included with the stream is extensive, you can toggle on/off different feeds within the node's configuration options.

ADCO

Key	Description	Property Type
USLAB000001	Control Moment Gyroscope (CMG)-1 On-Line	0=NOT IN USE \| 1=IN USE
USLAB000002	Control Moment Gyroscope (CMG)-2 On-Line	0=NOT IN USE \| 1=IN USE
USLAB000003	Control Moment Gyroscope (CMG)-3 On-Line	0=NOT IN USE \| 1=IN USE
USLAB000004	Control Moment Gyroscope (CMG)-4 On-Line	0=NOT IN USE \| 1=IN USE
USLAB000005	Number of Control Moment Gyroscope (CMG)s Online	{0:d0}
USLAB000006	Control Moment Gyroscope (CMG) Control Torque - Roll (N-m)	{0:f4}
USLAB000007	Control Moment Gyroscope (CMG) Control Torque - Pitch (N-m)	{0:f4}
USLAB000008	Control Moment Gyroscope (CMG) Control Torque - Yaw (N-m)	{0:f4}
USLAB000009	Active Control Moment Gyroscope (CMG) Momentum (Nms)	{0:d0}
USLAB000011	Desaturation Request (Enabled/Inhibited)	0=ENABLED \| 1=INHIBITED
USLAB000013	US Attitude Source	0=NONE\	1=GPS1 \| 2=GPS2 \| 3=Russian_Attitude \| 4=Ku_Band
USLAB000014	US Rate Source	0=NONE \| 1=RGA1 \| 2=RGA2 \| 3=RUSSIAN
USLAB000015	US State Vector Source	0=NO_SOURCE \| 1=Unused \| 2=Unused \| 3=RUSSIAN \| 4=GPS1_DETERMINISTIC \| 5=GPS2_DETERMINISTIC \| 6=GROUND
USLAB000016	Attitude Controller Type	0=ATTITUDE HOLD \| 1=TEA
USLAB000017	Attitude Control Reference Frame	0=LVLH \| 1=Inertial \| 2=XPOP
USLAB000018	US Current Local Vertical Local Horizontal (LVLH) Attitude Quaternion Component 0	{0:f2}
USLAB000019	US Current Local Vertical Local Horizontal (LVLH) Attitude Quaternion Component 1	{0:f2}
USLAB000020	US Current Local Vertical Local Horizontal (LVLH) Attitude Quaternion Component 2	{0:f2}
USLAB000021	US Current Local Vertical Local Horizontal (LVLH) Attitude Quaternion Component 3	{0:f2}
USLAB000022	US Attitude Roll Error (deg)	{0:f2}
USLAB000023	US Attitude Pitch Error (deg)	{0:f2}
USLAB000024	US Attitude Yaw Error (deg)	{0:f2}
USLAB000025	US Commanded Attitude Quaternion Component 0	{0:f2}
USLAB000026	US Commanded Attitude Quaternion Component 1	{0:f2}
USLAB000027	US Commanded Attitude Quaternion Component 2	{0:f2}
USLAB000028	US Commanded Attitude Quaternion Component 3	{0:f2}
USLAB000038	Active Control Moment Gyroscope (CMG) Momentum Capacity (Nms)	{0:d0}
USLAB000039	ISS Total Mass (kg)	{0:d0}
USLAB000040	Solar Beta Angle (degrees)	{0:f2}
USLAB000041	Loss of CMG Attitude Control (LOAC) Caution Message In Alarm	0=FALSE \| 1=TRUE
USLAB000042	Loss of ISS Attitude Control (LOAC) Caution Message In Alarm	0=FALSE \| 1=TRUE
USLAB000043	Global Positioning System (GPS-1) Ops Status	0=DOING POSITION FIXES \| 1=SV TIMING \| 2=APPROXIMATE TIMING \| 3=GPS TIME \| 4=NEED INITIALIZATION \| 5=GDOP NEEDED \| 6=BAD TIMING \| 7=NO USABLE SV \| 8=ONLY 1 USABLE SVs \| 9=ONLY 2 USABLE SVs \| 10=ONLY 3 USABLE SVs \| 11=BAD INTEGRITY \| 12=NO VEL AVAIL \| 13=UNUSABLE FIX
USLAB000044	Global Positioning System (GPS-2) Ops Status	0=DOING POSITION FIXES \| 1=SV TIMING \| 2=APPROXIMATE TIMING \| 3=GPS TIME \| 4=NEED INITIALIZATION \| 5=GDOP NEEDED \| 6=BAD TIMING \| 7=NO USABLE SV \| 8=ONLY 1 USABLE SVs \| 9=ONLY 2 USABLE SVs \| 10=ONLY 3 USABLE SVs \| 11=BAD INTEGRITY \| 12=NO VEL AVAIL \| 13=UNUSABLE FIX
USLAB000045	Spin Motor Spin Bearing Temperature - Control Moment Gyroscope (CMG) 1 (deg C)	{0:f1}
USLAB000046	Spin Motor Spin Bearing Temperature - Control Moment Gyroscope (CMG) 2 (deg C)	{0:f1}
USLAB000047	Spin Motor Spin Bearing Temperature - Control Moment Gyroscope (CMG) 3 (deg C)	{0:f1}
USLAB000048	Spin Motor Spin Bearing Temperature - Control Moment Gyroscope (CMG) 4 (deg C)	{0:f1}
USLAB000049	Hall Resolver Spin Bearing Temperature - Control Moment Gyroscope (CMG) 1 (deg C)	{0:f1}
USLAB000050	Hall Resolver Spin Bearing Temperature - Control Moment Gyroscope (CMG) 2 (deg C)	{0:f1}
USLAB000051	Hall Resolver Spin Bearing Temperature - Control Moment Gyroscope (CMG) 3 (deg C)	{0:f1}
USLAB000052	Hall Resolver Spin Bearing Temperature - Control Moment Gyroscope (CMG) 4 (deg C)	{0:f1}
Z1000001	Control Moment Gyroscope (CMG)-1 Vibration (g)	{0:f2}
Z1000002	Control Moment Gyroscope (CMG)-2 Vibration (g)	{0:f2}
Z1000003	Control Moment Gyroscope (CMG)-3 Vibration (g)	{0:f2}
Z1000004	Control Moment Gyroscope (CMG)-4 Vibration (g)	{0:f2}
Z1000005	Control Moment Gyroscope (CMG)-1 Spin Motor Current (amps)	{0:f2}
Z1000006	Control Moment Gyroscope (CMG)-2 Spin Motor Current (amps)	{0:f2}
Z1000007	Control Moment Gyroscope (CMG)-3 Spin Motor Current (amps)	{0:f2}
Z1000008	Control Moment Gyroscope (CMG)-4 Spin Motor Current (amps)	{0:f2}
Z1000009	Control Moment Gyroscope (CMG) 1 Wheel Speed (rpm)	{0:d0}
Z1000010	Control Moment Gyroscope (CMG) 2 Wheel Speed (rpm)	{0:d0}
Z1000011	Control Moment Gyroscope (CMG) 3 Wheel Speed (rpm)	{0:d0}
Z1000012	Control Moment Gyroscope (CMG) 4 Wheel Speed (rpm)	{0:d0}

CDH

Key	Description	Property Type
AIRLOCK000058	Airlock Multiplexer/Demultiplexer (MDM) on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
NODE1000001	Node 1 Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
NODE1000002	Node 1 Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
NODE2000004	Node 2 Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
NODE2000005	Node 2 Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
NODE3000014	Hub Control Zone (HCZ) Multiplexer/Demultiplexer 2 (MDM) on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
NODE3000015	Node 3 Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
NODE3000016	Hub Control Zone (HCZ) Multiplexer/Demultiplexer 1 (MDM) on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
NODE3000020	Node 3 Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
P1000006	P1 Truss Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
P1000008	Port Thermal Radiator (STR) Multiplexer/Demultiplexer (MDM) on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
P1000009	P1 Truss Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
P3000001	P3 Truss Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
P3000002	P3 Truss Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
P4000003	Photovolatic Control Unit (PVCU) - Solar Array - 2A Multiplexer/Demultiplexer (MDM) 120 Volt On-Off Status	0=Not Enabled \| 1=Enabled
P4000006	Photovolatic Control Unit (PVCU) - Solar Array - 4A Multiplexer/Demultiplexer (MDM) 120 Volt On-Off Status	0=Not Enabled \| 1=Enabled
P6000003	Photovolatic Control Unit (PVCU) - Solar Array - 4B Multiplexer/Demultiplexer (MDM) 120 Volt On-Off Status	0=Not Enabled \| 1=Enabled
P6000006	Photovolatic Control Unit (PVCU) - Solar Array - 2B Multiplexer/Demultiplexer (MDM) 120 Volt On-Off Status	0=Not Enabled \| 1=Enabled
S0000010	External Control Zone Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S0000011	S0 Truss Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S0000012	External Control Zone Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S0000013	S0 Truss Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S1000006	Starboard Thermal Radiator (STR) Multiplexer/Demultiplexer (MDM) on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S1000007	S1 Truss Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S1000008	S1 Truss Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S3000001	S3 Truss Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S3000002	S3 Truss Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S4000003	Photovolatic Control Unit (PVCU) - Solar Array - 1A Multiplexer/Demultiplexer (MDM) 120 Volt On-Off Status	0=Not Enabled \| 1=Enabled
S4000006	Photovolatic Control Unit (PVCU) - Solar Array - 3A Multiplexer/Demultiplexer (MDM) 120 Volt On-Off Status	0=Not Enabled \| 1=Enabled
S6000003	Photovolatic Control Unit (PVCU) - Solar Array - 3B Multiplexer/Demultiplexer (MDM) 120 Volt On-Off Status	0=Not Enabled \| 1=Enabled
S6000006	Photovolatic Control Unit (PVCU) - Solar Array - 1B Multiplexer/Demultiplexer (MDM) 120 Volt On-Off Status	0=Not Enabled \| 1=Enabled
USLAB000066	Command and Control (C&C) Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000067	Command and Control (C&C) Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000068	Command and Control (C&C) Multiplexer/Demultiplexer (MDM) 3 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000069	Internal Control Zone Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000070	Internal Control Zone Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000071	Payload (PL) Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000072	Payload (PL) Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000073	Guidance, Navigation and Control (GNC) Multiplexer/Demultiplexer 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000074	Guidance, Navigation and Control (GNC) Multiplexer/Demultiplexer 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000075	Power Management Controller Unit (PMCU) 1 Multiplexer/Demultiplexer 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000076	Power Management Controller Unit (PMCU) 2 Multiplexer/Demultiplexer 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000077	US Lab Multiplexer/Demultiplexer (MDM) 1 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000078	US Lab Multiplexer/Demultiplexer (MDM) 2 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000079	US Lab Multiplexer/Demultiplexer (MDM) 3 on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000080	Permanent Multipurpose Module - System Power voltage status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed

CATO

Key	Description	Property Type
P1000004	S-Band Radio Frequency Group (RFG 2) Azimuth Gimbal Position	{0:f2}
P1000005	S-Band Radio Frequency Group (RFG 2) Elevation Gimbal Position	{0:f2}
P1000007	S-Band Radio Frequency Group (RFG 2), on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
S1000004	S-Band Radio Frequency Group (RFG 1) Azimuth Gimbal Position	{0:f2}
S1000009	S-Band Radio Frequency Group (RFG 1), on-off status	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000088	Ku-Band Video Downlink Channel 1 Activity	0=INACTIVE \| 1=ACTIVE
USLAB000089	Ku-Band Video Downlink Channel 2 Activity	0=INACTIVE \| 1=ACTIVE
USLAB000090	Ku-Band Video Downlink Channel 3 Activity	0=INACTIVE \| 1=ACTIVE
USLAB000091	Ku-Band Video Downlink Channel 4 Activity	0=INACTIVE \| 1=ACTIVE
USLAB000092	Active String of S-Band	1=String 1 \| 2=String 2
USLAB000093	Internal Audio Controller (IAC) - IAC-1 Active/Backup Indication	0=Backup \| 1=Active
USLAB000094	Internal Audio Controller (IAC) - IAC-2 Active/Backup Indication	0=Backup \| 1=Active
USLAB000095	Video Source Routed to Downlink 1	0= - \| 1=S3AFT \| 2=S1UPOB \| 3=SCU1 Mux \| 4=S1LOOB \| 5=JPM a \| 6=JPM b \| 7=S1UPIB \| 8=S1LOIB \| 9=COL 1 \| 10=COL 2 \| 11=P1UPIB \| 12=SCU2 Mux \| 13=NOD3S \| 14=P1LOIB \| 15=SCU1 Test \| 16=WETA112 \| 17=ORB1 \| 18=ORB2 \| 19=P1LOOB \| 20=SCU2 Test \| 21=P3AFT \| 22=Payload Rack \| 23=VTR1 \| 24=VTR2 \| 25=NOD2LO \| 26=WETA115 \| 28=LAB S \| 31=POA PL3 \| 32=POA \| 33=SPDMS1 \| 34=SPDMS2 \| 35=MBS CLPA \| 36=SPDMLEE \| 37=MAST \| 40=BLEE \| 43=BELB \| 48=TELB \| 50=MSS PL3 \| 51=TLEE \| 52=Lab AVU1 \| 53=Lab AVU2 \| 54=Cup AVU1 \| 55=Cup AVU2 \| 56=OTCM1 \| 57=BODY1 \| 58=OTCM2 \| 59=BODY2 \| 60=SSRMS PL1 \| 61=SSRMS PL2 \| 62=SSRMS PL3 \| 63=MSS PL1 \| 64=MSS PL2 \| 65=LAB1D3 \| 66=LAB1P2 \| 67=LAB1P4 \| 68=LABCAM \| 69=LAB1O5 \| 70=LAB1O4 \| 71=LAB1O3 \| 72=LAB1O2 \| 73=LAB1O1 \| 74=LAB1S1 \| 75=LAB1S2 \| 76=LAB1S3 \| 77=A/L CAM \| 78=LAB1S4 \| 79=N1 CAM \| 80=N3 CAM
USLAB000096	Video Source Routed to Downlink 2	0= - \| 1=S3AFT \| 2=S1UPOB \| 3=SCU1 Mux \| 4=S1LOOB \| 5=JPM a \| 6=JPM b \| 7=S1UPIB \| 8=S1LOIB \| 9=COL 1 \| 10=COL 2 \| 11=P1UPIB \| 12=SCU2 Mux \| 13=NOD3S \| 14=P1LOIB \| 15=SCU1 Test \| 16=WETA112 \| 17=ORB1 \| 18=ORB2 \| 19=P1LOOB \| 20=SCU2 Test \| 21=P3AFT \| 22=Payload Rack \| 23=VTR1 \| 24=VTR2 \| 25=NOD2LO \| 26=WETA115 \| 28=LAB S \| 31=POA PL3 \| 32=POA \| 33=SPDMS1 \| 34=SPDMS2 \| 35=MBS CLPA \| 36=SPDMLEE \| 37=MAST \| 40=BLEE \| 43=BELB \| 48=TELB \| 50=MSS PL3 \| 51=TLEE \| 52=Lab AVU1 \| 53=Lab AVU2 \| 54=Cup AVU1 \| 55=Cup AVU2 \| 56=OTCM1 \| 57=BODY1 \| 58=OTCM2 \| 59=BODY2 \| 60=SSRMS PL1 \| 61=SSRMS PL2 \| 62=SSRMS PL3 \| 63=MSS PL1 \| 64=MSS PL2 \| 65=LAB1D3 \| 66=LAB1P2 \| 67=LAB1P4 \| 68=LABCAM \| 69=LAB1O5 \| 70=LAB1O4 \| 71=LAB1O3 \| 72=LAB1O2 \| 73=LAB1O1 \| 74=LAB1S1 \| 75=LAB1S2 \| 76=LAB1S3 \| 77=A/L CAM \| 78=LAB1S4 \| 79=N1 CAM \| 80=N3 CAM
USLAB000097	Video Source Routed to Downlink 3	0= - \| 1=S3AFT \| 2=S1UPOB \| 3=SCU1 Mux \| 4=S1LOOB \| 5=JPM a \| 6=JPM b \| 7=S1UPIB \| 8=S1LOIB \| 9=COL 1 \| 10=COL 2 \| 11=P1UPIB \| 12=SCU2 Mux \| 13=NOD3S \| 14=P1LOIB \| 15=SCU1 Test \| 16=WETA112 \| 17=ORB1 \| 18=ORB2 \| 19=P1LOOB \| 20=SCU2 Test \| 21=P3AFT \| 22=Payload Rack \| 23=VTR1 \| 24=VTR2 \| 25=NOD2LO \| 26=WETA115 \| 28=LAB S \| 31=POA PL3 \| 32=POA \| 33=SPDMS1 \| 34=SPDMS2 \| 35=MBS CLPA \| 36=SPDMLEE \| 37=MAST \| 40=BLEE \| 43=BELB \| 48=TELB \| 50=MSS PL3 \| 51=TLEE \| 52=Lab AVU1 \| 53=Lab AVU2 \| 54=Cup AVU1 \| 55=Cup AVU2 \| 56=OTCM1 \| 57=BODY1 \| 58=OTCM2 \| 59=BODY2 \| 60=SSRMS PL1 \| 61=SSRMS PL2 \| 62=SSRMS PL3 \| 63=MSS PL1 \| 64=MSS PL2 \| 65=LAB1D3 \| 66=LAB1P2 \| 67=LAB1P4 \| 68=LABCAM \| 69=LAB1O5 \| 70=LAB1O4 \| 71=LAB1O3 \| 72=LAB1O2 \| 73=LAB1O1 \| 74=LAB1S1 \| 75=LAB1S2 \| 76=LAB1S3 \| 77=A/L CAM \| 78=LAB1S4 \| 79=N1 CAM \| 80=N3 CAM
USLAB000098	Video Source Routed to Downlink 4	0= - \| 1=S3AFT \| 2=S1UPOB \| 3=SCU1 Mux \| 4=S1LOOB \| 5=JPM a \| 6=JPM b \| 7=S1UPIB \| 8=S1LOIB \| 9=COL 1 \| 10=COL 2 \| 11=P1UPIB \| 12=SCU2 Mux \| 13=NOD3S \| 14=P1LOIB \| 15=SCU1 Test \| 16=WETA112 \| 17=ORB1 \| 18=ORB2 \| 19=P1LOOB \| 20=SCU2 Test \| 21=P3AFT \| 22=Payload Rack \| 23=VTR1 \| 24=VTR2 \| 25=NOD2LO \| 26=WETA115 \| 28=LAB S \| 31=POA PL3 \| 32=POA \| 33=SPDMS1 \| 34=SPDMS2 \| 35=MBS CLPA \| 36=SPDMLEE \| 37=MAST \| 40=BLEE \| 43=BELB \| 48=TELB \| 50=MSS PL3 \| 51=TLEE \| 52=Lab AVU1 \| 53=Lab AVU2 \| 54=Cup AVU1 \| 55=Cup AVU2 \| 56=OTCM1 \| 57=BODY1 \| 58=OTCM2 \| 59=BODY2 \| 60=SSRMS PL1 \| 61=SSRMS PL2 \| 62=SSRMS PL3 \| 63=MSS PL1 \| 64=MSS PL2 \| 65=LAB1D3 \| 66=LAB1P2 \| 67=LAB1P4 \| 68=LABCAM \| 69=LAB1O5 \| 70=LAB1O4 \| 71=LAB1O3 \| 72=LAB1O2 \| 73=LAB1O1 \| 74=LAB1S1 \| 75=LAB1S2 \| 76=LAB1S3 \| 77=A/L CAM \| 78=LAB1S4 \| 79=N1 CAM \| 80=N3 CAM
USLAB000099	Space-To-Space Radio (UHF) 1 Power	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000100	Space-To-Space Radio (UHF) 2 Power	0=Off-Ok \| 1=Not-Off Ok \| 3=Not-Off Failed
USLAB000101	Space-To-Space Radio Frame Sync Lock	0=Frame Sync unlocked \| 1=Frame Sync locked
Z1000013	Ku-Band Transmit	0=RESET \| 1=NORMAL
Z1000014	Ku-Band SGANT Elevation Position	{0:f2}
Z1000015	Ku-Band SGANT Cross-Elevation Position	{0:f2}

CSA

Key	Description	Property Type
CSAMT000001	MSS MT Position Float	Position, centimeters from 0
CSAMT000001	MSS MT Utility Port ID (which Worksite MT is connected to, WS1 though WS8)	1=WS1 \| 2=WS2 \| 3=WS3 \| 4=WS4 \| 5=WS5 \| 6=WS6 \| 7=WS7 \| 8=WS8
CSASSRMS001	MSS EDCD SSRMS Base Location	?
CSASSRMS002	MSS EDCD SSRMS Base Location	1=Lab \| 2=Node3 \| 4=Node2 \| 7=MBS PDGF 1 \| 8=MBS PDGF 2 \| 11=MBS PDGF 3 \| 13=MBS PDGF 4 \| 14=FGB \| 16=POA \| 19=SSRMS Tip LEE \| 63=Undefined
CSASSRMS003	MSS EDCD SSRMS Operating Base (Which LEE is Base)	0=Lee A \| 5=Lee B
CSASSRMS004	SSRMS SR Measured Joint Position	Angle
CSASSRMS005	SSRMS SY Measured Joint Position	Angle
CSASSRMS006	SSRMS SP Measured Joint Position	Angle
CSASSRMS007	SSRMS EP Measured Joint Position	Angle
CSASSRMS008	SSRMS WP Measured Joint Position	Angle
CSASSRMS009	SSRMS WY Measured Joint Position	Angle
CSASSRMS010	SSRMS WR Measured Joint Position	Angle
CSASSRMS011	MSS OCS Payload Status SSRMS Tip LEE	0=Released \| 1=Captive \| 2=Captured
CSASPDM0001	MSS OCS Base Location SPDM	?
CSASPDM0002	MSS OCS Base Location SPDM	1=Lab \| 2=Node3 \| 4=Node2 \| 7=MBS PDGF 1 \| 8=MBS PDGF 2 \| 11=MBS PDGF 3 \| 13=MBS PDGF 4 \| 14=FGB \| 16=POA \| 19=SSRMS Tip LEE \| 63=Undefined
CSASPDM0003	MSS OCS SPDM 1 SR Measured Joint Position	Angle
CSASPDM0004	MSS OCS SPDM 1 SY Measured Joint Position	Angle
CSASPDM0005	MSS OCS SPDM 1 SP Measured Joint Position	Angle
CSASPDM0006	MSS OCS SPDM 1 EP Measured Joint Position	Angle
CSASPDM0007	MSS OCS SPDM 1 WP Measured Joint Position	Angle
CSASPDM0008	MSS OCS SPDM 1 WY Measured Joint Position	Angle
CSASPDM0009	MSS OCS SPDM 1 WR Measured Joint Position	Angle
CSASPDM0010	MSS Payload Status OCS SPDM Arm 1 OTCM	0=Released \| 1=Captive \| 2=Captured
CSASPDM0011	MSS OCS SPDM 2 SR Measured Joint Position	Angle
CSASPDM0012	MSS OCS SPDM 2 SY Measured Joint Position	Angle
CSASPDM0013	MSS OCS SPDM 2 SP Measured Joint Position	Angle
CSASPDM0014	MSS OCS SPDM 2 EP Measured Joint Position	Angle
CSASPDM0015	MSS OCS SPDM 2 WP Measured Joint Position	Angle
CSASPDM0016	MSS OCS SPDM 2 WY Measured Joint Position	Angle
CSASPDM0017	MSS OCS SPDM 2 WR Measured Joint Position	Angle
CSASPDM0018	MSS Payload Status OCS SPDM Arm 2 OTCM?	?
CSASPDM0019	MSS Payload Status OCS SPDM Arm 2 OTCM	0=Released \| 1=Captive \| 2=Captured
CSASPDM0020	MSS OCS SPDM Body Roll Joint Position	Angle
CSASPDM0021	MSS Payload Status OCS SPDM Body?	?
CSASPDM0022	MSS Payload Status OCS SPDM Body	0=Released \| 1=Captive \| 2=Captured
CSAMBS00001	MSS OCS Payload Status MBS MCAS?	?
CSAMBS00002	MSS OCS Payload Status MBS MCAS	0=Released \| 1=Captured
CSAMBA00003	MSS OCS Payload Status MBS POA?	?
CSAMBA00004	MSS OCS Payload Status MBS POA	0=Released \| 1=Captive \| 2=Captured

EVA

Key	Description	Property Type
AIRLOCK000001	Supplies power through the Umbilical Interface Assembly (UIA) to the spacesuits (EMU 1), Voltage	{0:f2}
AIRLOCK000002	Supplies power through the Umbilical Interface Assembly (UIA) to the spacesuits (EMU 1), Current	{0:f2}
AIRLOCK000003	Supplies power through the Umbilical Interface Assembly (UIA) to the spacesuits (EMU 2), Voltage	{0:f2}
AIRLOCK000004	Supplies power through the Umbilical Interface Assembly (UIA) to the spacesuits (EMU 2), Current	{0:f2}
AIRLOCK000005	In-flight Refill Unit (IRU), Voltage	{0:f2}
AIRLOCK000006	In-flight Refill Unit (IRU), Current	{0:f2}
AIRLOCK000007	Supplies power to the spacesuits (EVA Mobility Unit, EMU 1), Voltage	{0:f2}
AIRLOCK000008	Supplies power to the spacesuits (EVA Mobility Unit, EMU 1), Current	{0:f2}
AIRLOCK000009	Supplies power to the spacesuits (EVA Mobility Unit, EMU 2), Voltage	{0:f2}
AIRLOCK000010	Supplies power to the spacesuits (EVA Mobility Unit, EMU 2), Current	{0:f2}
AIRLOCK000011	Battery Charger Assembly (BCA) 1 Voltage	{0:f2}
AIRLOCK000012	Battery Charger Assembly (BCA) 1 Current	{0:f2}
AIRLOCK000013	Battery Charger Assembly (BCA) 2 Voltage	{0:f2}
AIRLOCK000014	Battery Charger Assembly (BCA) 2 Current	{0:f2}
AIRLOCK000015	Battery Charger Assembly (BCA) 3 Voltage	{0:f2}
AIRLOCK000016	Battery Charger Assembly (BCA) 3 Current	{0:f2}
AIRLOCK000017	Battery Charger Assembly (BCA) 4 Voltage	{0:f2}
AIRLOCK000018	Battery Charger Assembly (BCA) 4 Current	{0:f2}
AIRLOCK000019	Battery Charger Assembly (BCA) 1 Status	0=Normal \| 1=No Data \| 2=Missing Data \| 3=Extra Data
AIRLOCK000020	Battery Charger Assembly (BCA) 2 Status	0=Normal \| 1=No Data \| 2=Missing Data \| 3=Extra Data
AIRLOCK000021	Battery Charger Assembly (BCA) 3 Status	0=Normal \| 1=No Data \| 2=Missing Data \| 3=Extra Data
AIRLOCK000022	Battery Charger Assembly (BCA) 4 Status	0=Normal \| 1=No Data \| 2=Missing Data \| 3=Extra Data
AIRLOCK000023	Battery Charger Assembly (BCA) 1 Channel 1 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000024	Battery Charger Assembly (BCA) 1 Channel 2 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000025	Battery Charger Assembly (BCA) 1 Channel 3 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000026	Battery Charger Assembly (BCA) 1 Channel 4 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000027	Battery Charger Assembly (BCA) 1 Channel 5 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000028	Battery Charger Assembly (BCA) 1 Channel 6 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000029	Battery Charger Assembly (BCA) 2 Channel 1 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000030	Battery Charger Assembly (BCA) 2 Channel 2 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000031	Battery Charger Assembly (BCA) 2 Channel 3 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000032	Battery Charger Assembly (BCA) 2 Channel 4 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000033	Battery Charger Assembly (BCA) 2 Channel 5 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000034	Battery Charger Assembly (BCA) 2 Channel 6 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000035	Battery Charger Assembly (BCA) 3 Channel 1 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000036	Battery Charger Assembly (BCA) 3 Channel 2 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000037	Battery Charger Assembly (BCA) 3 Channel 3 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to a time-out error \| 14=Task terminated due to an external-temperature error \| 15=Discharge \| 16=Wait on Discharge \| 17=Wait on Charge
AIRLOCK000038	Battery Charger Assembly (BCA) 3 Channel 4 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000039	Battery Charger Assembly (BCA) 3 Channel 5 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000040	Battery Charger Assembly (BCA) 3 Channel 6 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000041	Battery Charger Assembly (BCA) 4 Channel 1 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000042	Battery Charger Assembly (BCA) 4 Channel 2 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000043	Battery Charger Assembly (BCA) 4 Channel 3 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000044	Battery Charger Assembly (BCA) 4 Channel 4 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000045	Battery Charger Assembly (BCA) 4 Channel 5 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000046	Battery Charger Assembly (BCA) 4 Channel 6 Status	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK
AIRLOCK000047	Pumps atmosphere from Airlock into Node one during depress, voltage status.	0=Off-Ok \| 1=Not-Off Ok \| 2=Not-Off Failed\
AIRLOCK000048	Pumps atmosphere from Airlock into Node one during depress, switch status.	0=No History - a charge has not been initiated yet \| 1=Presently charging \| 2=Task completed normally \| 3=Task terminated due to stop switch being toggled \| 4=Task terminated due to an open circuit error \| 5=Task terminated due to Wrong Batt or Hi-imp \| 6=Task terminated due to an over-temperature error \| 7=Amp-hour capacity test result OK \| 8=Amp-hour capacity test error \| 9=Task terminated due to low charge slope error \| 10=Task terminated due to power error \| 11=Task terminated due to reverse-polarity error \| 12=Task terminated due to a short-circuit error \| 13=Task terminated due to### AIRLOCK

ETHOS

AIRLOCK and NODE

Key	Description	Property Type
AIRLOCK000049	Crewlock Pressure	{0:f2}
AIRLOCK000050	Hi P O2 Supply valve position	0=CLOSED \| 1=OPEN \| 2=IN-TRANSIT \| 3=FAILED
AIRLOCK000051	Lo P O2 Supply Valve position	0=CLOSED \| 1=OPEN \| 2=IN-TRANSIT \| 3=FAILED
AIRLOCK000052	N2 Supply Valve position	0=CLOSED \| 1=OPEN \| 2=IN-TRANSIT \| 3=FAILED
AIRLOCK000053	Airlock Air Conditioner State	0=RESET \| 1=DRAIN \| 2=DRYOUT \| 3=EIB OFF \| 4=OFF \| 5=ON \| 6=STARTUP \| 7=TEST
AIRLOCK000054	Airlock Pressure	{0:f2}
AIRLOCK000055	Airlock Hi P O2 Tank Pressure	{0:f1}
AIRLOCK000056	Airlock Lo P O2 Tank Pressure	{0:f1}
AIRLOCK000057	Airlock N2 Tank Pressure	{0:f1}
NODE2000001	Coolant water quantity (Node 2), MT	{0:f1}
NODE2000002	Coolant water quantity (Node 2), LT	{0:f1}
NODE2000003	Node 2 Air Conditioner State	0=RESET \| 1=DRAIN \| 2=DRYOUT \| 3=EIB OFF \| 4=OFF \| 5=ON \| 6=STARTUP \| 7=TEST
NODE2000006	Air Cooling Fluid Temp (Node 2)	{0:f1}
NODE2000007	Avionics Cooling Fluid Temp (Node 2)	{0:f1}
NODE3000001	Node 3 ppO2	{0:f2}
NODE3000002	Node 3 ppN2	{0:f2}
NODE3000003	Node 3 ppCO2	{0:f2}
NODE3000004	Urine Processor State	2=STOP \| 4=SHUTDOWN \| 8=MAINTENANCE \| 16=NORMAL \| 32=STANDBY \| 64=IDLE \| 128=SYSTEM INITIALIZED
NODE3000005	Urine Tank Qty	{0:f1}
NODE3000006	Water Processor State	1=STOP \| 2=SHUTDOWN \| 3=STANDBY \| 4=PROCESS \| 5=HOT SERVICE \| 6=FLUSH \| 7=WARM SHUTDOWN
NODE3000007	Water Processor Step	0=NONE \| 1=VENT \| 2=HEATUP \| 3=PURGE \| 4=FLOW \| 5=TEST \| 6=TEST_SV_1 \| 7=TEST_SV_2 \| 8=SERVICE
NODE3000008	Waste Water Tank Qty	{0:f1}
NODE3000009	Clean Water Tank Qty	{0:f1}
NODE3000010	Oxygen Generator State	1=PROCESS \| 2=STANDBY \| 3=SHUTDOWN \| 4=STOP \| 5=VENT_DOME \| 6=INERT_DOME \| 7=FAST_SHUTDOWN \| 8=N2_PURGE_SHUTDOWN
NODE3000011	O2 Production rate	{0:f2}
NODE3000012	Avionics Cooling Fluid Temp (Node 3)	{0:f1}
NODE3000013	Air Cooling Fluid Temp (Node 3)	{0:f2}
NODE3000017	Coolant water quantity (Node 3)	{0:f1}
NODE3000018	Node 3 Air Conditioner State	0=RESET \| 1=DRAIN \| 2=DRYOUT \| 3=EIB OFF \| 4=OFF \| 5=ON \| 6=STARTUP \| 7=TEST
NODE3000019	Coolant water quantity (Node 3)	{0:f1}
USLAB000053	Lab ppO2	{0:f2}
USLAB000054	Lab ppN2	{0:f2}
USLAB000055	Lab ppCO2	{0:f2}
USLAB000056	Coolant water quantity, LT (Lab)	{0:f1}
USLAB000057	Coolant water quantity, MT (Lab)	{0:f1}
USLAB000058	Cabin pressure	{0:f2}
USLAB000059	Cabin temperature	{0:f1}
USLAB000060	Avionics Cooling Fluid Temp (Lab)	{0:f1}
USLAB000061	Air Cooling Fluid Temp (Lab)	{0:f2}
USLAB000062	Vacuum Resource System Valve Position	0=FAIL \| 1=OPEN \| 2=CLSD \| 3=TRNS
USLAB000063	Vacuum Exhaust System Valve Position	0=FAIL \| 1=OPEN \| 2=CLSD \| 3=TRNS
USLAB000064	Lab Port Air Conditioner State	0=RESET \| 1=DRAIN \| 2=DRYOUT \| 3=EIB OFF \| 4=OFF \| 5=ON \| 6=STARTUP \| 7=TEST
USLAB000065	Lab Starboard Air Conditioner State	0=RESET \| 1=DRAIN \| 2=DRYOUT \| 3=EIB OFF \| 4=OFF \| 5=ON \| 6=STARTUP \| 7=TEST

ODIN

Key	Description	Property Type
USLAB000082	Standard Command Counter - Count of standard commands received by the ISS Command and Control Computer	{0:d0}
USLAB000083	Data Load Command Counter - Count of data load commands received by the ISS Command and Control Computer	{0:d0}
USLAB000084	ISS Command and Control Multiplexer/Demultiplexer Onboard Time (course)	%sT
USLAB000085	ISS Command and Control Multiplexer/Demultiplexer Onboard Time (fine)	{0:f7}
USLAB000087	# Laptops active and connected to the Primary Command and Control (C&C) Multiplexer/Demultiplexer (MDM)	{0:d0}

SPARTAN

Key	Description	Property Type
P1000001	Loop B Pump Flowrate (kg/hr)	{0:f1}
P1000002	Loop B PM Out Press (kPa)	{0:f1}
P1000003	Loop B PM Out Temp (deg C)	{0:f1}
P4000001	Photovolatic Control Unit (PVCU) - Solar Array - 2A - Drive Voltage	{0:f1}
P4000002	Photovolatic Control Unit (PVCU) - Solar Array - 2A - Drive Current	{0:f2}
P4000004	Photovolatic Control Unit (PVCU) - Solar Array - 4A - Drive Voltage	{0:f1}
P4000005	Photovolatic Control Unit (PVCU) - Solar Array - 4A - Drive Current	{0:f2}
P4000007	Photovolatic Control Unit (PVCU) - Solar Array - 2A - Beta Gimble Assembly (BGA) Position (degrees)	{0:f1}
P4000008	Photovolatic Control Unit (PVCU) - Solar Array - 4A - Beta Gimble Assembly (BGA) Position (degrees)	{0:f1}
P6000001	Photovolatic Control Unit (PVCU) - Solar Array - 4B - Drive Voltage	{0:f1}
P6000002	Photovolatic Control Unit (PVCU) - Solar Array - 4B - Drive Current	{0:f2}
P6000004	Photovolatic Contr

node-red

lightstreamer-client-node

0.2.1

8 months ago

0.2.0

8 months ago

0.1.0

9 months ago