@saeon/mnemosyne NPM

mnemosyne

A very simple HTTP-range supporting file server. Stream your file in, and stream your file out! Named after the goddess of memory and file systems.

Supports:

Multiple directory mounts
Rate-limiting downloads
Permission-based uploads/updates/deletes

Background

A new format for cloud-optimized, multidimensional data (Zarr), and the potential need for SAEON to host (or at least test hosting) cloud-optimized-geotiffs (COGs) makes this quick project worthwhile.

Usage

Mnemosyne is a relatively simple file server - GET HTTP requests for viewing files, PUT HTTP requests for uploading files, POST HTTP requests for upserting files, and DELETE HTTP requests for deleting files and (empty) directories. Start the application with the --key argument (and at least one --login and --permission) to enable uploads. Otherwise uploads are disabled by default, the idea being that it's straightforward to share any directory on a server via HTTP Range requests.

Turn your current directory into a COG-sharing HTTP Range server with a single command!

npx @saeon/mnemosyne -v ./

# Or throttle downloads per file to 2MB/s
npx @saeon/mnemosyne \
  -v ./ \
  -t 2097152

Things to note:

Folders that contain index.html files wil be served as websites.
CORS is enabled (*), so the file server can be perused automatically via client-side JavaScript
Default GET retrieval options can be overridden via URL params (see below)
When mounting multiple directories, you cannot have duplicate top-level folders, but you can have duplicate top level files
Running Mnemosyne without specifying a volume results in the application creating a temporary volume on your file system. Mnemosyne will NOT try to create volumes that are mounted but don't exist on the file system

Viewing/retrieving files

Tools that understand cloud-optimized formats (i.e. COGs, Zarrs, etc.) should work flawlessly when pointed to files hosted on this server. Otherwise, some examples of explicit HTTP requests:

Download entire file via cURL

curl \
  -X GET \
  --keepalive-time 1200 \
  http://localhost:3000/filename.tif

Download partial file via cURL

curl \
  -H "Range: bytes=12-20" \
  -X GET \
  http://localhost:3000/filename.tif

Customize GET requests via URL params

By default a GET request will serve (in order of preference):

A file if specified
An index.html file (served as a website) if present
The directory listing

You can override this logic via specifying URL params:

?noindex: For directories with an index.html file, this will serve the directory listing instead of a website
?json: This will return a JSON representation of a directory listing (useful in browser environments, but rather use the Accept: Application/json header for API calls)

In the case where there are duplicate filenames (only possible at the root), use the param ?v=N to specify which mounted volume you are referring to (where N is an integer starting at 0).

NOTE - all files are publicly available

Customize GET requests via HTTP headers

You can request a JSON representation of a directory listing by specifying Accept: Application/json in the HTTP headers

Serving websites

Any folder that includes an index.html file will be served as a website. One potential use-case of this is to provide a branded / themed landing page for a particular directory. A folder that includes an index.html file will not show the directory listings, but those listings are still accessible as direct links or via a JavaScript request. For example, to request the directory listing as JSON in JavaScript, and then append the result to the DOM:

// Client side JavaScript
fetch('http://localhost:3000/directory?json')
  .then(res => res.json())
  .then(json => {
    document.getElementsByTagName('body')[0].append(JSON.stringify(json))
  })

You can serve the website on a custom domain via registering a CNAME record and then configuring URL-rewrites to the desired folder. Currently this has to be done by manually adjusting Nginx configuration - ask me to make this user-configurable!!

Upload/update mode

Start the application with a --key, a --login, and a --permission to enable uploading, updating and deleting files. The server will log an appropriate key to use for upload/update mode when started in read-only mode.

For example:

npx @saeon/mnemosyne \
  --key <256-bit (32-byte) cryptographic key for use with the AES-256-CBC encryption algorithm.>
  --volume /some/directory \
  --login username \
  --permission username:/some/directory

All files/folder in the exposed volume (/some/directory in this case) will be served, and the login username will have permission to write/edit some/directory. Permissions need to be granted explicitly.

To upload files to the server either add a directory/file to the exposed volume, or upload via the HTTP PUT API endpoint. Directories will be created to match the specified resource URL if they do not exist already.

cURL examples (uploads)

Here are some examples using cURL (and some notes) using the default authentication token on localhost. (Look at server logs for authentication tokens):

For PUT requests I find it's necessary to pipe the output to cat, since cURL won't print output to stdout (who knows why) when using POST and PUT requests
The -T header means 'transfer file'. Use this instead of --data-binary, since the latter will try to load your entire file into memory before sending
The --keepalive-time header is necessary when you are uploading large files. By default cURL will only use 60 seconds as the default time to keep a connection open, which is not long enough to upload large files
In some cases it may be helpful to use the --limit-rate flag. For example, if you have an incredibly fast internet connection and uploads are failing, try limiting the upload speed to 3MB/sec (--limit-rate 3m)
Here is a helpful list of cURL flags

Upload file as binary

This loads the entire file into memory first, so should probably be avoided unless the file is small. I think this is faster than other options (for small files).

cat ./some/local/cog.tiff \
  | curl \
    --progress-bar \
    --keepalive-time 1200 \
    -X PUT \
    -H "Authorization: Bearer fd1ddb014036c75f8f11532f330ab42d:403494a94ebf44728cd63e02a3f9c070" \
    -H "Content-Type: application/octet-stream" \
    --data-binary @- \
    http://localhost:3000/some/deep/nested/directory/cog.tif \
      | cat

Specify a file to upload

Better than the previous example because the file is streamed (-T)

curl \
  --progress-bar \
  --keepalive-time 1200 \
  -X PUT \
  -H "Authorization: Bearer fd1ddb014036c75f8f11532f330ab42d:403494a94ebf44728cd63e02a3f9c070" \
  -T \
  ./some/local/cog.tiff \
  http://localhost:3000/some/deep/nested/directory/cog.tif \
    | cat

And then that file can be retrieved at http://localhost:3000/some/deep/nested/directory/cog.tif.

Chunked uploads

This is useful for uploading large files via cURL as contents are never fully buffered in memory.

Stream from a file

I'm not sure if there is any benefit to this approach over specifying -T /path/to/file as above.

cat ./some/local/cog.tiff \
  | curl \
    --progress-bar \
    --keepalive-time 1200 \
    -X PUT \
    -H "Authorization: Bearer fd1ddb014036c75f8f11532f330ab42d:403494a94ebf44728cd63e02a3f9c070" \
    -H "Content-Type: application/octet-stream" \
    -T \
    - \
    http://localhost:3000/some/deep/nested/directory/cog.tif \
      | cat

Stream from a file using mbuffer

This is definitely quite nifty as you get buffer information

mbuffer \
  -i ./some/local/cog.tiff \
  -r 2M \
  | curl \
    --progress-bar \
    --keepalive-time 1200 \
    -X PUT \
    -H "Content-Type: application/octet-stream" \
    -H "Authorization: Bearer fd1ddb014036c75f8f11532f330ab42d:403494a94ebf44728cd63e02a3f9c070" \
    --data-binary @- \
    http://localhost:3000/some/deep/nested/directory/cog.tif \
      | cat

Uploading a directory recursively

For example, a Zarr directory

find \
  /path/to/directory.zarr \
  -type f \
  -exec \
    curl \
    --progress-bar \
    --keepalive-time 1200 \
    -X PUT \
    -H "Authorization: Bearer fd1ddb014036c75f8f11532f330ab42d:403494a94ebf44728cd63e02a3f9c070" \
    --create-dirs \
    -T {} \
    http://localhost:3000/some/nested/directory/{} \; \
      | cat

PowerShell example (Windows)

The equivalent to the cURL utility on Windows Platform is the Invoke-RestMethod tool. This is an example on how to use it to upload a single file to Mnemosyne from the PowerShell terminal

cd /to/the/directory/with/your/file
$FILENAME = "some-file.tiff"
$headers = New-Object "System.Collections.Generic.Dictionary[[String],[String]]"
$headers.Add("Authorization", "Bearer fd1ddb014036c75f8f11532f330ab42d:403494a94ebf44728cd63e02a3f9c070")

Invoke-RestMethod `
    -Uri "http://localhost:3000/some/nested/directory/$FILENAME" `
    -Method Put `
    -InFile "./$FILENAME" `
    -Headers $headers `
    -ContentType "application/octet-stream" `
    -Verbose

Customizing the client

To customize the HTML client, override the /client directory your own /client directory, that contains an index.html file and related static assets. In the case of using the Dockerfile provided in this repo, mount your website client to /mnemosyne/client.

Updating files

Use the HTTP POST method instead of the HTTP PUT method in the examples above. Note that this is actually an upsert operation, where the target resource is either created if it doesn't exist, or updated if it does (assuming correct permissions).

Deleting files

Use the HTTP DELETE method to delete an existing file or empty directory (trying to delete a non-empty directory will result in a 409 response). For example, to delete a file using cURL:

curl \
  --silent \
  -X DELETE \
  -H "Authorization: Bearer fd1ddb014036c75f8f11532f330ab42d:403494a94ebf44728cd63e02a3f9c070" \
  http://localhost:3000/some/deep/nested/directory/cog.tif

Development

Install Node.js v20.3.1 Then setup the project:

# Clone the repository
git clone git@github.com:SAEON/mnemosyne.git
cd mnemosyne

# Install chomp CLI
npm install -g chomp
chomp --version # (wait for output)

# Install dependencies
npm install

# Start the app and write code!
chomp --watch

Refer to chompfile.toml to see the start command used for local development

Testing

There are some integration tests in the test/ folder, and some unit tests in the src/ folder. To run:

chomp test
chomp unit-tests

The unit tests are run on every save, but it may be helpful to run tests as a separate server. To do this, use the --watch flag with chomp:

chomp test --watch

Deployment

Use a process manager such as pm2 to restart on failure. See below for Dockerized deployment

# Clone the repository
git clone git@github.com:SAEON/mnemosyne.git
cd mnemosyne

# Install dependencies from lockfile
npm ci --only=production

# Start the app
NODE_ENV=production \
TZ=UTC \
  node \
    src \
      --key <256-bit (32-byte) cryptographic key for use with the AES-256-CBC encryption algorithm.>
      --volume /path/to/directory
      --volume /other/path/to/directory
      --login some-user
      --login some-user2
      --login some-user@gmail.com
      --permission some-user:/path/to/directory

# Look at the startup logs, and pass access tokens to the relevant users

Docker

Build a Docker image locally

docker build -t mnemosyne .

Run a containerized instance of the server

# default volume (cache directory), uploads disabled
docker run --rm -p 3000:3000 --name mnemosyne

# Mount a host volume, uploads disabled
docker run \
  --rm \
  --name mnemosyne \
  -p 3000:3000 \
  -v /some/host/directory:/mounted-directory \
  mnemosyne \
    --volume /mounted-directory

# Mount a host volume, uploads enabled
docker run \
  --rm \
  -p 3000:3000 \
  --name mnemosyne \
  -v /some/host/directory:/mnt1 \
  -v /some/other/host/directory:/mnt2 \
  mnemosyne \
    --key <256-bit (32-byte) cryptographic key for use with the AES-256-CBC encryption algorithm.> \
    --volume /mnt1 \
    --volume /mnt2 \
    --login user1 \
    --login user2 \
    --permission user1:/mnt1
    --permission user1:/mnt2
    --permission user2:/mnt2/some/sub/directory/only

Publishing

Publish as a public package to NPM

npm publish --access public

http-server range cloud optimized geotiff zarr

@hapi/accept mime mkdirp mocha nanoid yargs

@everything-registry/sub-chunk-801

2 years ago

2 years ago

2 years ago

2 years ago

2 years ago