ccxmleventemitter v0.9.9beta
#CCXMLEventEmitter
Connects the CurrentCost (EnvIR) basestation (CC128) XML output with node.js EventEmitter.
I wanted to be able to deal with my EnvIR basestation XML output within node, but using node's EventEmitter rather than having to deal with the XML directly. As the EnvIR mostly conforms to the CC128 specification, this should work with other devices (like the original CC128), so if you use this on another device successfully please drop me a line (or update the github wiki) with the device name/type and if possible the 'src' property from the 'base' message.
There are a few node/currentcost implementations out there, but they did not seem as simple to interface with as I had envisaged. I'll list some I looked at below as they may be a better fit for others.
This module is initialised with a 'device' parameter representing the serial port your currentcost basestation is connected to. Additional options can be provided as a second hash parameter.
Once you have instantiated an instance of 'CurrentCost128XMLBaseStation' it will emit various messages with relevant data that your implementation can listen to and act upon. I will add history events shortly (as I have no current use for them).
I use coffee-script, so examples are coffee-script
ccSvc = require 'cc128EventSvc'
options = {emitBaseEvery: 60} #default
envir = new ccSvc.CurrentCost128XMLBaseStation '/dev/ttyUSB0', options #or whatever your usb device is.
#you can then listen to those events you want
envir.on 'sensor', (eventinfo) ->
console.log "whole house using:#{eventinfo.watts} watts" if eventinfo.sensor == 0 See the examples folder for more information
The following events are emitted (descriptions below):
- 'base', (baseinfo)
- 'sensor', (sensorinfo)
- 'impulse', (impulseinfo)
- 'impulse-reading', (impulsereadinginfo)
- 'impulse-avg', (impulseavginfo)
The following events are planned:
- 'history', (historyinfo)
###base### 'base' events are generated every {emitBaseEvery} seconds (default = 60). They contain information relating to the basestation itself. Internally these messages are generated very frequently but they contain very little useful information except perhaps temperature of the base station itself, and are hence reported every 60 seconds by default. This can be changed by the {emitBaseEvery} parameter.
parameters: baseinfo
###sensor### This is emitted every time a normal sensor reading is generated, sensors are 0-9 with 0 being while house and 9 normally being a 'data' channel. If a 'data' channel is detected, it is actually generated as a set of 'impulse' events as they carry additional information, in which case a 'sensor' event will NOT be generated.
parameters: sensorinfo
###impulse This event is emitted everytime a 'data' channel is encountered. So if you have configured one of your EnvIR channels as a 'data' channel it will be reported as 'impulse' rather than 'sensor', as impulse events have additional information.
parameters: impilseinfo
###impulse-reading### This event represents the 'reading' that would be present on your meter dials if you initialised the class with your current meter reading. It should track your meter within a reasonable margin of error. These events seem to be generated less often than 'sensor' events, approx every 27.5 seconds on my unit.
parameters: impulsereadinginfo
###impulse-avg### This event represents the average consumption of (elec/gas/water) during the reporting periods. As the period is less often than 'sensor' events it may not seem to 'follow' your use pattern, but as it is based on 'pulses' it should be more accurate than those reported by 'sensor' events for overall consumption reporting.
parameters: impulseavginfo
##Additional implementations##