cr-bdd v1.1.2

Cruller

• Cruller is an open source page object framework for Google’s Puppeteer created by your pals in Engineering Productivity.
• Cruller allows for easier creation and maintenance of page objects by leveraging Stampit.
• Run in your pipelines using Browserless.

Why Automate?

• Catch bugs before your users do!
• When integretaed with a pipeline, Cruller allows a full suite of tests to run on every push and merge request
• Speed up your release cycle

Installation

Navigate to the repo where you would like to run Cruller. And run the following command to install Cruller into your project.

npm i cruller

Be sure to run npm init and ensure that the test command matches your test suite of choice (though Cruller was made with Jest in mind). No other fields are required.

Run the following command to generate a template project structure, containing sample pages and tests in the root of where your automated test suite will be located.

npx gen-fs

Configuration

A file called cruller.config.js will have been created. Within this file many parameters are set.

Environment Variables

Any number of environment variables can be set for different permutations of your crawls. You are able to include as many instances of each variable as needed. By default Cruller will perform one crawl pass for each permutation if your environment variable combinations. Cruller includes two variables in every project. Both the default avlues as well as the variables can be changed or deletes if they are not necessary:

• baseurl: the origin landing page of your project.

baseurl: {
    google:'http://www.google.com/',
    yahoo: 'https://www.yahoo.com/',
    bing: 'https://www.bing.com/'
}

• breakpoints: size breakpoint between devices.

breakpoint: {
        mobile: {width: 650, height: 2000},
        tablet: {width: 900, height: 2000},
        desktop: {width: 1200, height: 2000}
}

Setup Function

Using any JS or Puppeteer methods, define any steps required to configure the startup state of your crawler, such as ensuring proper authentication credentials

await page.authenticate({username: 'YOUR_USERNAME', password:'YOUR_PASSWORD'})

or cookies are set.

await page.setCookie({ name: 'COOKIE_NAME', value: 'COOKIE_VALUE' });

By default the configuration of baseurl and breakpoints will be defined here.
Be sure to set up your custom environment variables.

Env Exceptions

A function that contains custom instructions for specific permutations of environment variables which do not occur normally. The example below assumes environment variables are set for baseurl and breakpoint and that the permutation of tablet && bing should override the breakpoint to display as mobile and not tablet.

if (envMap.breakpoint == 'tablet' && envMap.baseurl == 'bing') envMap.breakpoint = 'mobile';
return envMap;

Example Page Stamp & Crawl

Before we dive into how to write stamps and tests let's take a look at an example of each. First, here's what a page stamp to execute a search on the home page of 3 popular search engines may look like.

const stampit = require('@stamp/it');

// We are using Google as our base, this code will be run unless a later stamp overwrites it.
const homeBase = stampit({
    props: {
        // Defining a prop to select the search bar on Google
        searchBar: '[aria-label="Search"]'
    },

    methods: {
        // Use Puppeteer to fill in a search and execute the search
        async search() {
            await this.puppeteerPage.waitForSelector(this.searchBar, {visible: true});
            await this.puppeteerPage.type(this.searchBar, 'cruller npm', {delay: 20});
            await this.puppeteerPage.keyboard.press('Enter');
        }
    }
});

// This stamp will override props and methods with the same name in the base when Yahoo is set as the baseurl 
const homeYahoo = stampit({
    props: {
        searchBar: '#uh-search-form'
    }
});

// This stamp will override props and methods with the same name in the base when Bing is set as the baseurl
const homeBing = stampit({
    props: {
        searchBar: '#sb_form_q'
    }
});

module.exports = { homeBase, homeYahoo, homeBing };

Now let's see how we'd take these stamps and use them in a crawl. See sample.test.js to see the same crawl using Jest.

const B = require('cruller'); // replace B with project-specific name
const permutations = require('cruller').cartesian;

        sample = new B;
        // Establish which variables will be used for different permutations
        await sample.startUp({baseurl: baseurl, breakpoint: breakpoint});
        // Call the 'search' function from our home page stamp
        await sample.homePage.search();
        // Be sure to close your crawls when they are done!
        await sample.browser.close();

File Structure

Pages Folder

Each file in the pages directory contains all of the stamps used on that particular page.

• Any stamps created must be added to the index.js file of the pages directory

Sections Folder

• Currently WIP!

Shared Folder

Each file in the bashared directory contains stamps that are used across several pages. Every stamp created in the bashared directory is available to be used on any page, as long as it is not overwritten by an identically named prop or method.

• Any stamps created must be added to the index.js file of the bashared directory

Tests Folder

Each test crawl must be added to the tests folder with the syntax:
testname.test.js

Puppeteer

Puppeteer is a Node library created by Google to control Chrome or Chromium over the DevTools protocol and is the backbone of Cruller.

Any action that can be taken using DevTools can be mimicked by Puppeteer. For testing purposes it works best to crawl through pages, by actions such as clicking buttons and filling in forms. The full list of available actions can be found here.

Stamps

What Are Stamps?

Stamps are what Cruller uses to creates page objects and methods. Every page Cruller runs on will have stamps defining its props and methods.

Each page's Stamps are JS objects created using the stampit method with up to two properties, props and methods.

Creating Stamps

• All stamp names within a page must match value exported in index.js followed by either Base as the default stamp, or the name of one of your permutations if it requires custom actions.

• The base stamp is the collection of props and methods that will be used on the given page by default, across all permutations of your enviornment variables, unless overwritten for specific environment variables with a seperate stamp.

• If stamps for specific environment variables are needed create (and be sure to export!) a new stamp containing only the values of the Base stamp which must be overwritten. Name the stamp with the page title followed by the specific environment variable that is being used. For example, the Home Page stamp that only runs on the Google baseurl would be named homeGoogle.

• There is no need to include a separate Page Stamp for any environment variable that has the same properties and methods as your base stamp.

• Stamps for specific environment variables will overwrite any props or methods with the same name provided in the base stamp.
  This is especially useful if the same prop or method requires different inputs or selectors depending on the environment, as your crawl will pick the correct stamp depending on the permutation.

• To see an example set of page stamps from your generated file structure see stamps/pages/home.js.

Props

Props are how stampit adds properties to your Page Object. Every prop on a page will be a key value pair in the props object of your stamp.

• To increase the readability of your methods it is recommended every CSS selector used for your methods is given a descriptive prop. Be sure to indicate the type of selector being used with the proper notation (# for an ID, . for a class, or [title/label/etc="value"]).

• Props are also valuable for inputting data such as form data.

Methods

The second half of a stamp are Methods. Methods are stampit functions associated with your page object. Since this a web crawler, it is recommended that only asynchronous functions are used, with each step being preceded by an await to ensure your methods execute in the correct order. All Puppeteer functions are available.

Ensure that whenever Puppeteer functions are called that they reference the Page Object.

As an example, the proper syntax for a statement in which the link prop is clicked would be the following:

await this.puppeteerPage.click(this.link);

However, you are not limited to using Puppeteer functions to create your methods. All non-Puppeteer JS functions can be used as well. Just be sure to call them asynchronously if necessary using await.

Cruller even includes 4 helper methods available within every stamp. In these methods the props are called by a string value of their key.

1) waitClick(prop): waits for a prop and then clicks once the prop is visible.

await this.waitClick('loginButton');

2) waitClickNavigate(prop): waits for a prop, clicks once the prop is visible, and waits for navigation on the page to complete.

await this.waitClickNavigate('registerButton');

3) emptyField(prop): deletes all text content of specified prop.

await this.emptyField('selectQuantity');

4) clickByIndex(prop, index): clicks on particular instance or a given prop using a zero based index of its incidence.

await this.clickByIndex('productNameLink', '2');

Creating Tests in Jest

• Cruller can support any test suite, however it was created with running Jest in mind. Be sure to install Jest in your project if you decide to use it, as it is not included with Cruller.

• Every test should contain a beforeAll that launches a new instance of the crawler using Chromium and runs the startUp command, which takes two objects as parameters.
  1) perms: Permutations needed for the test. Baseurl and breakpoint are the two included with Cruller. * Be sure to include any additional environment variables. 2) opts: Puppeteer Connect Options are not required to be included on any given test. If none are provided, Puppeteer's default connection settings will be used. You can any other necessary set up steps to the function as well on a test-by-test basis.

beforeAll(async () => {
        sample = new B;
        await sample.startUp({banner: banner, breakpoint: breakpoint});
    }, 80000);

• Every test should contain an afterAll that closes the browser, as well as any teardown steps necessary on a test-by-test basis.

    afterAll(async () => {
        await sample.browser.close();
    });

• Each test will be a series of steps under the following format until the crawl has completed all steps.
  await [project name].[page name]Page.[method];

await sample.homePage.search();

• Any set of assertions can be implemented but are not necessary to run tests. Be sure to establish where assertions are kept in your package.json file. The following example shows both the snippet to declare the location of your custom assertions in package.json as well as an example to create an assertion to check if an element is visible on the given page.

"jest": {
    "setupFilesAfterEnv": [
      "./assertions.js"
    ]
  },

expect.extend({
    async toHaveElement(puppeteerPage, expectedElement) {
        await puppeteerPage.waitForSelector(expectedElement, {visible: true}); 
        const pass = await puppeteerPage.$(expectedElement) !== null;
        if (pass) {
            return {
                message: () =>
                    `expected ${puppeteerPage.url()} not to contain the element ${expectedElement}`,
                pass: true,
            }; 
        } else {
            return {
                message: () =>
                    `expected ${puppeteerPage.url()} to contain the element ${expectedElement}`,                    
                pass: false,
            };
        }
    }
});

• A sample test is provided in tests/sample.test.js.

Running Tests Locally

• Run npm test on the command line within the directory your tests are located in.

• You can specify in the command line to run only certain permutations of your tests. The following command would run all tests using only the permutations of Google and Yahoo as your baseurl running at a tablet sized breakpoint.

BASEURL="google,yahoo" BREAKPOINT="tablet" npm test

• You can also run a subset of tests by passing in a string after npm test in your command line. As an example, if you had a whole test suite, but just wanted to run tests that have the string smoke in the title, you would run the following command.

npm test smoke

Running Tests in the Pipeline

• The rules for which permutations and tests to run apply for the pipeline as well, as long as they are set up in your yaml or bash file.

• Ensure when running in the pipeline that the PIPELINE environment variavle is set to true. This allows the test to run using Browserless. Please note that you need to provide a Browserless Key in your cruller.config.js. The prior example would be called the following way in the pipeline.

PIPELINE=true BASEURL="google,yahoo" BREAKPOINT="tablet" npm test

• Add a stage to you .yml file for your automated tests. An example based on a gitlab-ci.yml follows:

run_e2e_tests:
  image: mhart/alpine-node
  stage: e2e_test
  when: manual
  before_script:
   - cd test-automation
   - npm install
  script:
   - PIPELINE=true BASEURL="google,yahoo" BREAKPOINT="tablet" npm test
  only:
   - master
   - tags

Commiting to This Repo

• We use commitizen to format our commits. Run git commit after staging your changes to trigger the commitizen cli. Provide the type of change, component, a short description, and the ticket number. The other fields can be left blank.

Running Accessibility check

• We use axe-puppeteer to test for accessibility and axe-reports to generate accessibility violation report at project root. Supported formats for report are tsv and csv.

• To run accessibility check, crawl to the desired page. After navigating to page, pass the page reference to accessibilityCheck method as following:

  await [project name].accessibilityCheck([project name].page);

• accessibilityCheck method allows for two parameters, namely expected page and createNewFile flag. Flag value defaults to value set in config file, if none provided as argument.

• Sample Jest matchers for accessibility validation can be refrenced at - __tests__/accessibility.test.js