Crx-bridge NPM

crx-bridge

Messaging in Chrome extensions made super easy. Out of the box.

How much easy exactly?

This much

// Inside devtools script

import { sendMessage } from 'crx-bridge';

// ...

button.addEventListener('click', () => {
	const res = await sendMessage('get-selection',  { ignoreCasing: true },  'content-script');
	console.log(res); // > "The brown fox is alive and well"
})

// Inside content script

import { sendMessage, onMessage } from 'crx-bridge';

onMessage('get-selection', async (message) => {
  const { sender, data: { ignoreCasing } } = message;

  console.log(sender.context, sender.tabId); // > content-script  156

  const { selection } = await sendMessage('get-preferences', { sync: false }, 'background');
  return calculateSelection(data.ignoreCasing, selection);
});

// Inside background script

import { onMessage } from 'crx-bridge';

onMessage('get-preferences', ({ data }) => {
	const { sync } = data;

  return loadUserPreferences(sync);
});

Examples above require transpilation and/or bundling using webpack/babel/rollup

crx-bridge handles everything for you as efficiently as possible. No more chrome.runtime.sendMessage or chrome.runtime.onConnect or chrome.runtime.connect ....

Setup

Install

$ npm i crx-bridge

Light it up

Just import Bridge from 'crx-bridge' wherever you need it and use as shown in example above

Even if your extension doesn't need a background page or wont be sending/receiving messages in background script. crx-bridge uses background/event context as staging area for messages, therefore it must loaded in background/event page for it to work. (Attempting to send message from any context will fail silently if crx-bridge isn't available in background page). See troubleshooting section for more.

API

`Bridge.sendMessage(messageId: string, data: any, destination: string)`

Sends a message to some other part of your extension, out of the box.

Notes:

If there is no listener on the other side an error will be thrown where sendMessage was called.
Listener on the other may want to reply. Get the reply by awaiting the returned Promise
An error thrown in listener callback (in the destination context) will behave as usual, that is, bubble up, but the same error will also be thrown where sendMessage was called

`messageId`

Required | string

Any string that both sides of your extension agree on. Could be get-flag-count or getFlagCount, as long as it's same on receiver's onMessage listener.

`data`

Required | any

Any serializable value you want to pass to other side, latter can access this value by refering to data property of first argument to onMessage callback function.

`destination`

Required | string

The actual identifier of other endpoint. Example: devtools or content-script or background or content-script@133 or devtools@453

content-script, window and devtools destinations can be suffixed with @<tabId> to target specific tab. Example: devtools@351, points to devtools panel inspecting tab with id 351.

Read Behaviour section to see how destinations (or endpoints) are treated.

Note: For security reasons, if you want to receive or send messages to or from window context, one of your extension's content script must call Bridge.allowWindowMessaging(<namespace: string>) to unlock message routing. Also call Bridge.setNamespace(<namespace: string>) in those window contexts. Use same namespace string in those two calls, so crx-bridge knows which message belongs to which extension (in case multiple extensions are using crx-bride in one page)

`Bridge.onMessage(messageId: string, callback: fn)`

Register one and only one listener, per messageId per context. That will be called upon Bridge.sendMessage from other side.

Optionally, send a response to sender by returning any value or if async a Promise.

`messageId`

Required | string

Any string that both sides of your extension agree on. Could be get-flag-count or getFlagCount, as long as it's same in sender's sendMessage call.

`callback`

Required | fn

A callback function Bridge should call when a message is received with same messageId. The callback function will be called with one argument, a BridgeMessage which has sender, data and timestamp as its properties.

Optionally, this callback can return a value or a Promise, resolved value will sent as reply to sender.

Read security note before using this.

`Bridge.allowWindowMessaging(namespace: string)`

Caution: Dangerous action

Applicable to content scripts (noop if called from anywhere else)

Unlocks the transmission of messages to and from window (top frame of loaded page) contexts in the tab where it is called. crx-bridge by default won't transmit any payload to or from window contexts for security reasons. This method can be called from a content script (in top frame of tab), which opens a gateway for messages.

Once again, window = the top frame of any tab. That means allowing window messaging without checking origin first will let JavaScript loaded at https://evil.com talk with your extension and possibly give indirect access to things you won't want to, like history API. You're expected to ensure the safety and privacy of your extension's users.

`namespace`

Required | string

Can be a domain name reversed like com.github.facebook.react_devtools or any uuid. Call Bridge.setNamespace in window context with same value, so that crx-bridge knows which payload belongs to which extension (in case there are other extensions using crx-bridge in a tab). Make sure namespace string is unique enough to ensure no collisions happen.

`Bridge.setNamespace(namespace: string)`

Applicable to scripts in top frame of loaded remote page

Sets the namespace Bridge should use when relaying messages to and from window context. In a sense, it connects the callee context to the extension which called Bridge.allowWindowMessaging(<namespace: string>) in it's content script with same namespace.

`namespace`

Required | string

Extras

The following API is built on top of Bridge.sendMessage and Bridge.onMessage, basically, it's just a wrapper, the routing and security rules still apply the same way.

`Bridge.openStream(channel: string, destination: string)`

Opens a Stream between caller and destination.

Returns a Promise which resolves with Stream when the destination is ready (loaded and Bridge.onOpenStreamChannel callback registered). Example below illustrates a use case for Stream

`channel`

Required | string

Stream(s) are strictly scoped Bridge.sendMessage(s). Scopes could be different features of your extension that need to talk to the other side, and those scopes are named using a channel id.

`destination`

Required | string

Same as destination in Bridge.sendMessage(msgId, data, destination)

`Bridge.onOpenStreamChannel(channel: string, callback: fn)`

Registers a listener for when a Stream opens. Only one listener per channel per context

`channel`

Required | string

Stream(s) are strictly scoped Bridge.sendMessage(s). Scopes could be different features of your extension that need to talk to the other side, and those scopes are named using a channel id.

`callback`

Required | fn

Callback that should be called whenever Stream is opened from the other side. Callback will be called with one argument, the Stream object, documented below.

Stream(s) can be opened by a malicious webpage(s) if your extension's content script in that tab has called Bridge.allowWindowMessaging, if working with sensitive information use isInternalEndpoint(stream.info.endpoint) to check, if false call stream.close() immediately.

Stream Example

// background.js

// To-Do

Behaviour

Following rules apply to destination being specified in Bridge.sendMessage(msgId, data, destination) and Bridge.openStream(channelId, initialData, destination)

Specifying devtools as destination from content-script will auto-route payload to inspecting devtools page if open and listening.
Specifying content-script as destination from devtools will auto-route the message to inspected window's top content-script page if listening. If page is loading, message will be queued up and deliverd when page is ready and listening.
If window context (which could be a script injected by content script) are source or destination of any payload, transmission must be first unlocked by calling Bridge.allowWindowMessaging(<namespace: string>) inside that page's top content script, since Bridge will first deliver the payload to content-script using rules above, and latter will take over and forward accordingly. content-script <-> window messaging happens using window.postMessage API. Therefore to avoid conflicts, Bridge requires you to call Bridge.setNamespace(uuidOrReverseDomain) inside the said window script (injected or remote, doesn't matter).
Specifying devtools or content-script or window from background will throw an error. When calling from background, destination must be suffixed with tab id. Like devtools@745 for devtools inspecting tab id 745 or content-script@351 for top content-script at tab id 351.

Serious security note

The following note only applies if and only if, you will be sending/receiving messages to/from window contexts. There's no security concern if you will be only working with content-script, background or devtools scope, which is default setting.

window context(s) in tab A get unlocked the moment you call Bridge.allowWindowMessaging(namespace) somewhere in your extenion's content script(s) that's also loaded in tab A.

Unlike chrome.runtime.sendMessage and chrome.runtime.connect, which requires extension's manifest to specify sites allowed to talk with the extension, crx-bridge has no such measure by design, which means any webpage whether you intended or not, can do Bridge.sendMessage(msgId, data, 'background') or something similar that produces same effect, as long as it uses same protocol used by crx-bridge and namespace set to same as yours.

So to be safe, if you will be interacting with window contexts, treat crx-bridge as you would treat window.postMessage API.

Before you call Bridge.allowWindowMessaging, check if that page's window.location.origin is something you expect already.

As an example if you plan on having something critical, always verify the sender before responding:

// background.js
import { onMessage, isInternalEndpoint } from 'crx-bridge';

onMessage('getUserBrowsingHistory', (message) => {
  const { data, sender } = message;
  // Respond only if request is from 'devtools', 'content-script' or 'background' endpoint
  if (isInternalEndpoint(sender)) {
    const { range } = data;
    return getHistory(range);
  }
});

Troubleshooting

Doesn't work? If window contexts are not part of the puzzle, crx-bridge works out of the box for messaging between devtools <-> background <-> content-script(s). If even that is not working, it's likely that crx-bridge hasn't been loaded in background page of your extension, which is used by crx-bridge as a staging area. If you don't need a background page for yourself, here's bare minimum to get crx-bridge going.

// background.js (requires transpilation/bundling using webpack(recommended))

import 'crx-bridge';

// manifest.json

{
	"background": {
		"scripts": ["path/to/transpiled/background.js"]
	}
}

Can't send messages to window? Sending or receiving messages from or to window requires you to open the messaging gateway in content script(s) for that particular tab. Call Bridge.allowWindowMessaging(<namespaceA: string>) in any of your content script(s) in that tab and call Bridge.setNamespace(<namespaceB: string>) in the script loaded in top frame i.e the window context. Make sure that namespaceA === namespaceB. If you're doing this, read the security note above