express-multifurcator v0.1.2

express-multifurcator

• Hostname-based subdomain routing – Route requests according to their hostname. Mount multiple applications or microservices on the same ExpressJS application.
• Hostname aliasing – Redirect secondary subdomains to a primary subdomain, e.g. www.example.com to example.com.
• HTTP to HTTPS redirection – Optionally redirect insecure requests to HTTPS at the application level. Works well for environments that don't support webserver-level HTTPS redirection (like AWS load balancers).
• Configurable application binding – Easily bind multiple applications to different ports... or the same port... or anything in between... managed entirely by config.json.

Motivation

Serving several applications (e.g. subdomains, microservices, etc.) from a single application server configuration with ExpressJS is entirely possible, but it might involve a significant amount of boilerplate engineering in your app.js script. This boilerplate is exacerbated if you're subscribing to 12-factor standards and need your runtime environments to behave differently.

You might be thinking: "This is absurd, I already have a solution. Why wouldn't I just compartmentalize my NodeJS applications in separate processes and/or code repositories?"

There's nothing necessarily wrong with that paradigm, especially if the applications are managed and deployed by separate teams or subject to different CI or review processes.

However consider the following scenario:

• You have a your primary website set up on example.com.
• You have your authentication service set up on auth.example.com.
• Your authentication service shares a significant amount of code with your primary website (e.g. middleware) and it makes "source code sense" to keep the two services in the same repository.
• Running two NodeJS processes (or more if you're clustering each application) may incur unacceptable overhead.

Consider another scenario:

• Your API and your web portal share a significant amount of business logic and are reviewed/developed by the same team.
• You've put your API and your web portal in the same codebase accordingly.
• In development you want to listen on a single port and run both your API and web portal.
• On production you want to deploy the same codebase to two different boxes and have one box run the API and the other box run the web portal.
• You want to keep your app.js clean, 12-factor compliant, and boot your services according to an external JSON configuration.

Cases such as these might result in an unmaintainable mess of boilerplate, and this is the sort of problem express-multifurcator was designed to resolve.

Installation

npm install express-multifurcator express

ExpressJS is listed as a peer dependency. It is technically possible to install and work with express-multifurcator without installing ExpressJS. The middleware generated with express-multifurcator can be mounted in any application that subscribes to the same request handling pattern as ExpressJS. However this is not recommended as certain ExpressJS features are assumed internally, particularly in obtaining a request's hostname, original URL, etc.

Installing optional dependencies is recommended:

npm install http-errors

The http-errors module is used internally to generate 404 errors when an inbound request doesn't match a mounted application. However, any error generating function can be used in lieu of http-errors as described in the API docs.

Usage

Basic

Working with express-multifurcator requires a slightly different approach to application configuration as compared to native ExpressJS.

const Multifurcator = require('express-multifurcator');
const express = require('express');


let container = new Multifurcator();
let app = express.Router();

app.use(function(req, res) {
    res.sendStatus(204);
});
 
container.add(app, 'http://localhost:8000');

let listeners = container.getListeners();

for (let i = 0; i < listeners.length; i++) {
    let listener = listeners[i];

    listener.app.use(listener.handler);

    listener.listen() // Binds the listener to it's interface/port.
        .then(function(server) {
            // Resolves with the HTTP server.
            // Same value as the return of ExpressJS's app.listen().
        }); 
}

Here, our "application" isn't created by a call to express(), but is instead an instantiated ExpressJS Router. This is by design so that we don't preclude the possibility of mounting multiple "applications" on the same port (more on this later).

We add our application to our express-multifurcator container and specify the address. There's nothing stopping us from adding multiple applications to the container at this point.

Finally we retrieve an array of "listeners" using .getListeners(). This function will automatically instantiate the appropriate number of ExpressJS apps (with express()). The number of unique addresses used when adding applications to the container determines how listeners there will be. In this case there will be one.

The listener handler is a middleware function generated by express-multifurcator that will handle the application routing. The generated middleware won't be automatically mounted on the corresponding ExpressJS app. This is because you might want to mount your own middleware first (e.g. body parsing, cookie parsing, logging, etc.).

The listen function intelligently binds the ExpressJS app to its corresponding interface and/or port and returns a Promise that is resolved once the app is successfully listening.

Hostname Redirection

Let's say we wanted to mount a single application but filter hostnames, or even better, redirect alias hostnames to our primary hostname.

let app = express.Router();

...

container.add(app, 'http://localhost:8000', {
    hostnames: ['example.com', 'example.org'],
    aliases: {
        'www.example.com': 'example.com',
        'blog.example.com': 'example.com'
    }
});

...

In this case we're accepting the hostnames example.com and example.org. Requests that specify either of these will not be subject to redirection at the application level (your webserver might still be configured to rewrite them or redirect them). We're also establishing an alias of www.example.com and blog.example.com both for example.com. Requests that specify either of these subdomains will be redirected at the application level to example.com. Any other hostnames will 404.

The redirection will default to HTTP since app was added to container using an HTTP address. This might be a minor inefficiency resulting in two redirects if you've intended all requests to example.com to be handled over HTTPS. So we could override this behavior explicitly as such:

let app = express.Router();

...

container.add(app, 'http://localhost:8000', {
    hostnames: ['example.com', 'example.org'],
    aliases: {
        'www.example.com': 'example.com',
        'blog.example.com': 'https://example.com'
    }
});

...

If we're only using one primary hostname we can use shorthand notation for behavior logically equivalent to the first example in this sub-section. Note that shorthand notation doesn't support protocol modification.

let app = express.Router();

...

container.add(app, 'http://localhost:8000', {
    hostnames: ['example.com'], // or 'example.com' as a literal string
    aliases: ['www.example.com', 'blog.example.com']
});

...

Wildcards are currently supported as the first domain segment only (e.g. *.example.com).

let app = express.Router();

...

container.add(app, 'http://localhost:8000', {
    hostnames: ['example.com'],
    aliases: ['*.example.com']
});

...

Mounting multiple applications

Consider the case where we actually want to mount multiple applications. We have a few options. We can:

• Mount each application on a different interface or port.
• Mount all applications on the same port distinguished by hostnames.
• Any permutation thereof.

The only requirement is if you're adding an application with the same address you cannot specify a hostname that has already been mounted. Keep in mind specifying no hostname is equivalent to the literal *, or logically equivalent to all hostnames.

let app1 = express.Router(); // Some application.
let app2 = express.Router(); // Another application.
let app3 = express.Router(); // Maybe a sub-application.
let app4 = express.Router(); // Fancy microservice.

...

container.add(app1, 'http://localhost:8000');

container.add(app2, 'http://localhost:8001', {
    hostnames: 'example.org'
});

container.add(app3, 'http://localhost:8001', {
    hostnames: 'subdomain.example.org'
});

container.add(app4, 'http://localhost:8002');

...

HTTPS Redirection

Depending on your proxy servers, HTTPS redirection may only be possible at the application layer. With this as the case you are able to mount an application on an HTTPS address and automatically redirect HTTP requests to HTTPS. This will NOT establish an encrypted connection for inbound requests inherently. That task is still left to your webserver.

A request is deemed secure (HTTPS) using req.secure so it typically depends on the HTTP header:

X-Forwarded-Proto: https

This header is settable by most proxy servers (e.g. AWS load balancers, Nginx, etc.) if configured correctly. Your web application will likely need to trust your proxy server in order for the header to be taken for granted. Be sure to check the ExpressJS docs on this topic.

Mounting the applications on an HTTPS listener is marginally different:

let app = express.Router();

...

container.add(app, 'https://localhost:8000');

...

Keep in mind that hostname redirection will now use HTTPS as the default redirection protocol rather than HTTP. So if you actually want to redirect to HTTP you'll need to set it up slightly differently.

let app = express.Router();

...

container.add(app, 'https://localhost:8000', {
    hostnames: ['example.com'],
    aliases: {
        'blog.example.com': 'http://example.com'
    }
});

...

Multiple applications can be mounted with mixed HTTP/HTTPS addresses in the same way as seen under "Mounting multiple applications."

UNIX domain socket binding

If you're using UNIX domain sockets instead of IPv4/6 addresses you need to adhere to a specific address format:

let app = express.Router();

...

container.add(app, 'https://unix:/path/to/socket');

...

Relative paths are also supported and are relative from the current working directory (process.cwd()):

let app = express.Router();

...

container.add(app, 'https://unix:./relative/path/to/socket');

...

Standalone .listen() usage

The function used internally for generating the .listen() function on the results of .getListeners() can also be used independently.

const express = require('express');
const listen = require('express-multifurcator').listen;

let app = express();

listen(app, 'http://localhost:8000')
    .then(function(server) {
        // Resolves with the HTTP server.
        // Same value as the return of ExpressJS's app.listen().
    });