Ffmpeg-static-stream NPM

FFmpeg-Stream

Node bindings to ffmpeg command, exposing stream based API.

Note: ffmpeg must be installed and available in PATH. You can set a custom ffmpeg path via FFMPEG_PATH environment variable (default is just ffmpeg).

Examples

const { Converter } = require("ffmpeg-stream")
const { createReadStream, createWriteStream } = require("fs")

async function convert() {
  const converter = new Converter()

  // get a writable input stream and pipe an image file to it
  const converterInput = converter.createInputStream({
    f: "image2pipe",
    vcodec: "mjpeg",
  })
  createReadStream(`${__dirname}/cat.jpg`).pipe(converterInput)

  // create an output stream, crop/scale image, save to file via node stream
  const converterOutput = converter.createOutputStream({
    f: "image2",
    vcodec: "mjpeg",
    vf: "crop=300:300,scale=100:100",
  })
  converterOutput.pipe(createWriteStream(`${__dirname}/cat_thumb.jpg`))

  // same, but save to file directly from ffmpeg
  converter.createOutputToFile(`${__dirname}/cat_full.jpg`, {
    vf: "crop=300:300",
  })

  // start processing
  await converter.run()
}

API

class Converter
Creates a new instance of the ffmpeg converter class. Converting won't start until run() method is called.
- method createInputStream(options: Options): stream.Writable
  Defines an ffmpeg input stream. Remember to specify the f option, which specifies the format of the input data. The returned stream is a writable stream.
- method createInputFromFile(file: string, options: Options): void
  Defines an ffmpeg input using specified path. This is the same as specifying an input on the command line.
- method createBufferedInputStream(options: Options): stream.Writable
  This is a mix of createInputStream and createInputFromFile. It creates a temporary file and instructs ffmpeg to use it, then it returns a writable stream attached to that file. Using this method will cause a huge delay.
- method createOutputStream(options: Options): stream.Readable
  Defines an ffmpeg output stream. Remember to specify the f option, which specifies the format of the output data. The returned stream is a readable stream.
- method createOutputToFile(file: string, options: Options): void
  Defines an ffmpeg output using specified path. This is the same as specifying an output on the command line.
- method createBufferedOutputStream(options: Options): stream.Readable
  This is a mix of createOutputStream and createOutputToFile. It creates a temporary file and instructs ffmpeg to use it, then it returns a readable stream attached to that file. Using this method will cause a huge delay.
- method run(): Promise<void>
  Starts the ffmpeg process. Returns a Promise which resolves on normal exit or kill, but rejects on ffmpeg error.
- method kill(): void
  Kills the ffmpeg process.
type Options
Object of options which you normally pass to the ffmpeg command in the terminal. Documentation for individual options can be found at ffmpeg site in audio and video category. For boolean options specify true or false. If you'd like to specify the same argument multiple times you can do so by providing an array of values. E.g. { map: ["0:v", "1:a"] }

FAQ

How to get video duration and other stats

You can use ffprobe command for now. It might be implemented in the library in the future, though.

Is there a `progress` or `onFrameEmitted` event

Currently, no.

Something doesn't work

Try running your program with DEBUG=ffmpeg-stream environment variable. It will print the ffmpeg command it executes and all the ffmpeg logs. The command usually looks something like ffmpeg -f … -i pipe:3 -f … pipe:4. pipe:number means it uses standard input/output instead of a file.

Error: Muxer does not support non seekable output

When getting error similar to this:

  [mp4 @ 0000000000e4db00] muxer does not support non seekable output
  Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument
  Error initializing output stream 0:1 --
  encoded 0 frames
  Conversion failed!

    at ChildProcess.<anonymous> (<DirPath>\node_modules\ffmpeg-stream\lib\index.js:215:27)
    at emitTwo (events.js:106:13)
    at ChildProcess.emit (events.js:191:7)
    at Process.ChildProcess._handle.onexit (internal/child_process.js:215:12)

ffmpeg says that the combination of options you specified doesn't support streaming. You can experiment with calling ffmpeg directly and specifying - or pipe:1 as output file. Maybe some other options or different format will work. Streaming sequence of JPEGs over websockets worked flawlessly for me ({ f: "image2pipe", vcodec: "mjpeg" }).

You can also use createBufferedOutputStream. That tells the library to save output to a temporary file and then create a node stream from that file. It wont start producing data until the conversion is complete, though.

How to get individual frame data

You have to set output format to mjpeg and then split the stream manually by looking at the bytes. You can implement a transform stream which does this:

const { Transform } = require("stream")

class ExtractFrames extends Transform {
  constructor(magicNumberHex) {
    super({ readableObjectMode: true })
    this.magicNumber = Buffer.from(magicNumberHex, "hex")
    this.currentData = Buffer.alloc(0)
  }

  _transform(newData, encoding, done) {
    // Add new data
    this.currentData = Buffer.concat([this.currentData, newData])

    // Find frames in current data
    while (true) {
      // Find the start of a frame
      const startIndex = this.currentData.indexOf(this.magicNumber)
      if (startIndex < 0) break // start of frame not found

      // Find the start of the next frame
      const endIndex = this.currentData.indexOf(
        this.magicNumber,
        startIndex + this.magicNumber.length
      )
      if (endIndex < 0) break // we haven't got the whole frame yet

      // Handle found frame
      this.push(this.currentData.slice(startIndex, endIndex)) // emit a frame
      this.currentData = this.currentData.slice(endIndex) // remove frame data from current data
      if (startIndex > 0) console.error(`Discarded ${startIndex} bytes of invalid data`)
    }

    done()
  }

  // TODO: Fix not emitting the last frame in a stream
}

And then use it like that:

const { Converter } = require("ffmpeg-stream")

const converter = new Converter()

converter
  .createOutputStream({ f: "image2pipe", vcodec: "mjpeg" })
  .pipe(new ExtractFrames("FFD8FF")) // use jpg magic number as delimiter
  .on("data", frameData => {
    /* do things with frame data (instance of Buffer) */
  })

converter.run()

How to create an animation from a set of image files

I have images in Amazon S3 bucket (private) so I'm using their SDK to download those. I get the files in Buffer objects. Is there any way I can use your package to create a video out of it?
So far I've been downloading the files and then using the following command: ffmpeg -framerate 30 -pattern_type glob -i '*.jpg' -c:v libx264 -pix_fmt yuv420p out.mp4
But now want to do it from my node js application automatically.

const { Converter } = require("ffmpeg-stream")

const frames = ["frame1.jpg", "frame2.jpg", ...etc]

// create converter
const converter = new Converter()

// create input writable stream (the jpeg frames)
const converterInput = converter.createInputStream({ f: "image2pipe", r: 30 })

// create output to file (mp4 video)
converter.createOutputToFile("out.mp4", {
  vcodec: "libx264",
  pix_fmt: "yuv420p",
})

// start the converter, save the promise for later
const convertingFinished = converter.run()

// pipe all the frames to the converter sequentially
for (const filename of frames) {
  // create a promise for every frame and await it
  await new Promise((resolve, reject) => {
    s3.getObject({ Bucket: "...", Key: filename })
      .createReadStream()
      .pipe(converterInput, { end: false }) // pipe to converter, but don't end the input yet
      .on("end", resolve) // resolve the promise after the frame finishes
      .on("error", reject)
  })
}
converterInput.end()

// await until the whole process finished just in case
await convertingFinished

How to stream a video when there's data, otherwise an intermission image

You can turn your main stream into series of jpeg images with output format mjpeg and combine it with static image by repeatedly piping a single jpeg image when there's no data from main stream. Then pipe it to second ffmpeg process which combines jpeg images into video.

const fs = require("fs")
const { Converter } = require("ffmpeg-stream")

// create the joiner ffmpeg process (frames to video)
const joiner = new Converter()
const joinerInput = joiner.createInputStream({ f: "mjpeg" })
const joinerOutput = joiner.createOutputStream({ f: "whatever format you want" })
joinerOutput.pipe(/* wherever you want */)

joiner.run()

// remember if we are streaming currently
let streaming = false

/**
 * A function which streams a single video.
 *
 * @param {stream.Readable} incomingStream - The video stream.
 * @param {string} format - The format of the video stream.
 *
 * @returns {Promise<void>} Promise which resolves when the stream ends.
 */
async function streamVideo(incomingStream, format) {
  if (streaming) throw new Error("We are already streaming something else")
  streaming = true

  // create the splitter ffmpeg process (video to frames)
  const splitter = new Converter()

  // pipe video to splitter process
  incomingStream.pipe(splitter.createInputStream({ f: format }))

  // get jpegs and pipe them to joiner process
  splitter.createOutputStream({ f: "mjpeg" }).pipe(joinerInput, { end: false })

  try {
    await splitter.run()
  } finally {
    streaming = false
  }
}

setInterval(() => {
  // if we are streaming - do nothing
  if (streaming) return

  // pipe a single jpeg file 30 times per second into the joiner process
  // TODO: don't actually read the file 30 times per second
  fs.createReadStream("intermission_pic.jpg").pipe(joinerInput, { end: false })
}, 1000 / 30)