gypsum-mesh v0.3.5

Gypsum

A procedural mesh generation library for Wonderland Engine, with support for asynchronous Constructive Solid Geometry powered by Manifold.

Features

• Multiple materials in a single manifold
• Automatic vertex indexing
• Procedural vertex normals (hard and smooth)
  • Automatic mesh smoothing with configurable smoothing angles is also included, which uses vertex normals weighted by triangle surface area
• Procedural vertex tangents - required for normal mapping
• Procedural texture wrapping
• Primitive solids:
  • Cuboids
  • Icosahedra
  • Spheres (icospheres, cube spheres, UV spheres, approximate equirectangular projections)
  • Pyramids and prismoids (pyramids, cones, frusta, cylinders, prisms, including with user-provided polylines)
  • Basic solids of revolution (tori, including solids of revolution with user-provided polylines)
  • Extrusions (linear or with curve frames, including with rotation minimizing frames)
• Asynchronous CSG operations
  • A pool of instances of the Manifold library is created; multiple CSG operations can be done in parallel. Pool size is configurable
  • Both primitive solids and user-provided meshes (with limitations) are supported

Limitations

• Skinned meshes are not supported. Vertex attributes related to skinning are ignored
• Meshes used for CSG operations must be 2-manifold. All procedural mesh generators make 2-manifold geometry, but user-provided meshes might not be 2-manifold
• Automatic manifold generation from user-provided meshes can't deal with singularities and shared edges
• No direct access to the Manifold library due to it being in a separate worker - CSG operations can be batched and sent as a tree of operations to mitigate this issue
• Equirectangular projections will always have artifacts near the poles because custom shaders are needed for proper equirectangular projections
• Extrusions can't self-intersect if they are used for CSG operations
• Solids of revolution can't have a polyline that comes before the middle, touches the middle, or has holes. For now, only torus-like solids of revolution are supported
• Extrusions can't have holes for the slice's polyline. Add them later with CSG operations
• Some UVs have zigzag artifacts. The only way to fix this is to use projective UVs, which require custom shaders and have 3 components (UVW) instead of 2 (UV)

Current known bugs

• Looped extrusions don't connect properly if bases have different scales

Table of contents

• Installing
• Building
• Usage
  • Example
  • API documentation
  • Procedural meshes
    • Getting submeshes
    • Applying transformations
    • Making procedural meshes
    • Creating MeshGroups from user-provided meshes
    • Memory management
  • CSG operations
• Contributing
• Future work
• Credits

Installing

Install Gypsum and Manifold with:

npm install --save-dev gypsum-mesh manifold-3d@2.1.0

In your build script, make sure to copy the Manifold library and the Gypsum worker to the deployment folder, by doing something such as this in your package.json:

{
  "scripts": {
    "copy-worker": "shx cp node_modules/gypsum-mesh/dist/gypsum-manifold.worker.* deploy/",
    "copy-manifold": "shx cp node_modules/manifold-3d/manifold.js deploy/ && shx cp node_modules/manifold-3d/manifold.wasm deploy/",
    "build-bundle": "esbuild ./js/bundle.js --minify --sourcemap --bundle --platform=browser --outfile=\"deploy/gypsum-example-bundle.js\"",
    "build": "npm run build-bundle && npm run copy-worker && npm run copy-manifold"
  }
}

Finally, open your project and: 1. Click the "Views" button on the top left 2. Enable "Project Settings" 3. Open the "Project Settings" tab on the top right 4. Under "JavaScript", change "bundlingType" to "npm" instead of "esbuild"

Building

npm install
npm run build

Builds will be placed in the dist directory.

Note that, for now, this project uses a custom build of the Manifold WebAssembly bindings, which can be found here. Once version 2 of the Manifold bindings is released, the official build will be used.

Usage

Example

An example Wonderland Engine project can be found on a different respository

API documentation

API documentation can be found on Github Pages.

Procedural meshes

Procedural meshes don't use the WL.Mesh class. Instead, they use their own class (MeshGroup) which contains a list of WL.Mesh and WL.Material pairs (submeshes), so that a single procedural mesh can have multiple materials. Procedural meshes also have utilities for applying transformations.

Getting submeshes

To get the submeshes of a procedural mesh procMesh, call procMesh.getSubmeshes(). This will return a list of submeshes, where each submesh is a pair of WL.Mesh and WL.Material instances. Note that if no material is provided for a submesh, then the material will be null, so make sure to either always specify a material, or to have a fallback material ready.

Getting the submeshes is necessary for rendering the procedural mesh:

for (const [mesh, material] of procMesh.getSubmeshes()) {
    this.object.addComponent('mesh', {
        mesh,
        material: material ?? fallbackMaterial
    });
}

Applying transformations

A procedural mesh procMesh can be translated (translate method), scaled (scale and uniformScale methods) and rotated (rotate method). A gl-matrix transformation matrix can also be applied to a procedural mesh by calling the transform method.

For example, this rotates a procedural mesh by 45 degrees around the Y axis:

procMesh.rotate(quat.fromEuler(quat.create(), 0, 45 ,0));

Transformation methods are chainable.

Making procedural meshes

All procedural meshes are implemented as subclasses of the MeshGroup class. To make a new procedural mesh, simply instantiate a subclass. The constructor arguments usually have 2 or more required argument, and all optional arguments are passed in an options object which can be omitted. The first argument is always a Wonderland Engine instance (the WL object for 0.9.5, or this.engine in future versions); this is to prepare for future versions where the WL object will no longer be global.

For example, a 1x1x1 cube can be created by creating a new CubeMesh instance:

const procMesh = new CubeMesh(WL, 1);

However, more options can be passed via an options object. For example, in this 6x6x6 cube, the cube is not centered unlike before, each face has a separate material, and the UVs for each face are set to each UV corner:

const procMesh = new CubeMesh(WL, 6, {
  center: false,
  // supply WL.Material instances for the following properties:
  // instead of a separate material for each side, `material` can also be passed to set all sides
  leftMaterial: this.leftMaterial,
  rightMaterial: this.rightMaterial,
  downMaterial: this.downMaterial,
  upMaterial: this.upMaterial,
  backMaterial: this.backMaterial,
  frontMaterial: this.frontMaterial,
  // supply UV coordinates for the top-left, top-right, bottom-left and bottom-right corners of a face by passing the following properties:
  // a position-to-UV ratio can also be provided instead of an array of UVs
  leftUVs: [[0, 1], [1, 1], [0, 0], [1, 0]],
  rightUVs: [[0, 1], [1, 1], [0, 0], [1, 0]],
  downUVs: [[0, 1], [1, 1], [0, 0], [1, 0]],
  upUVs: [[0, 1], [1, 1], [0, 0], [1, 0]],
  backUVs: [[0, 1], [1, 1], [0, 0], [1, 0]],
  frontUVs: [[0, 1], [1, 1], [0, 0], [1, 0]],
});

A list of all procedural mesh classes can be found in the API documentation, in the Procedural Mesh category.

Currently, the following procedural meshes are available:

• Cuboids:
  • Cube
  • Rectangular cuboid
• Extrusions:
  • Curve extrusion
  • Linear extrusion
  • Solid of revolution
• Icosahedron
• Prismoids:
  • Cylinder
  • Frustum
  • Prism
  • Prismoid
• Pyramids:
  • Cone
  • Pyramid
• Spheres:
  • Cube sphere
  • Icosphere
  • UV sphere
• Torus

Creating MeshGroups from user-provided meshes

User-provided meshes (as WL.Mesh instances) can be converted to MeshGroup instances if you need to trasform them:

// with material
const procMesh = MeshGroup.fromWLEMesh(mesh, material);
// ... or without material (material will be null)
// const procMesh = MeshGroup.fromWLEMesh(mesh);

// apply transformation to mesh group
procMesh.uniformScale(0.01);

The constructor can also be used if you want to make a MeshGroup consisting of multiple user-provided meshes. In this case, a list of submeshes (mesh and material pairs) must be supplied:

const procMesh = new MeshGroup([
  [firstMesh, firstMaterial],
  [secondMesh, null], // second mesh has no material, null must be passed
  [thirdMesh, thirdMaterial],
]);

// apply transformation to mesh group
procMesh.uniformScale(0.01);

Note that creating MeshGroup instances with user-provided meshes can fail if the meshes are used for CSG operations. This is because there is no connectivity information in the meshes, so the connectivity between triangles must be guessed. Currently, a naive algorithm based on vertex distance is used for guessing connectivity, but this fails if singularities exist, or if there are shared edges between more than 2 triangles.

Note that transforming MeshGroup instances created from user-provided meshes will modify the original meshes in-place. If you want to keep the original mesh intact, then pass a clone of the original mesh to the MeshGroup, instead of using the original mesh. A mesh clone function is available in the library (cloneMesh), but note that it does not copy skinning data.

Memory management

Procedural meshes create new WL.Mesh instances used for the submeshes of a MeshGroup. WL.Mesh instances are not automatically destroyed, as they are an engine resource, and therefore aren't garbage-collected.

If you are creating a procedural mesh and only using it for rendering, then the meshes don't have to be destroyed. They only need to be destroyed after you know you will no longer render them.

To destroy all the meshes in a MeshGroup, call MeshGroup.dispose(). For example, if you have a procedural mesh procMesh, then call procMesh.dispose(). Note that if a MeshGroup is created from a user-provided mesh, then the mesh will still be destroyed, meaning that if you passed the original mesh without cloning to the MeshGroup, then that mesh will be destroyed. If a clone was passed instead, then the clone will be destroyed.

If you are creating a mesh that is only used for a CSG operation, and then never used again, then it is recommended that you set the auto-dispose flag by calling MeshGroup.mark(). For example, if you have a procedural cube diffCube that is only used for subtracting another mesh in a CSG operation, then you can mark the cube to be auto-disposed by calling diffCube.mark(), and the cube will be disposed after it's used for a CSG operation. Attempting to use the cube after it was disposed will not work. The mark method is chainable.

CSG operations

CSG operations are done by making a tree of CSG operations, sending the tree to a worker, and waiting for the operations to finish asynchronously. However, there can be more than 1 worker, and the number of workers is configurable, so some extra setup work needs to be done; a pool of workers needs to be created, with the wanted number of workers, and the CSG operations are dispatched via this worker pool. The worker pool will then decide which worker to send the CSG operation to; the CSG pool load-balances.

Example (CSG pool has only 1 worker here):

// create a new pool of workers. note that the workers are not initialised until
// the first csg operation is dispatched, or until `initialize` is called. note
// that this should be shared between multiple scripts to avoid creating too
// many workers. always reuse a csg pool
const csg = new CSGPool(1);

// if you want to make sure that the pool is initialized before the first csg
// operation to prevent stuttering, then do the following:
// await csg.initialize();

// subtract 2 cubes, where the subtracting cube is offset by (0.5, 0.5, 0.5)
const resultMesh = await csg.dispatch(WL, {
  operation: 'subtract',
  left: new CubeMesh(WL, 1).mark(),
  right: new CubeMesh(WL, 1).translate([0.5, 0.5, 0.5]).mark(),
});

// get submeshes of the result of the CSG operation
const resultSubmeshes = resultMesh.getSubmeshes();

// add each submesh to the scene
for (const [mesh, material] of resultSubmeshes) {
  this.object.addComponent('mesh', {
    mesh,
    material: material ?? this.fallbackMaterial
  });
}

CSGPool are expensive to create, and there is a limit of workers that can be created in a browser. Ideally, there should be only 1 CSGPool instance with a reasonable amount of workers (such as 3), and the pool should be reused accross all scripts that do CSG operations.

If no more CSG operations will be done, then a CSGPool can be destroyed by calling the dispose method. For example, in a pool csg:

csg.dispose();

Disposing a pool will invalidate it; any operations done on a disposed pool will throw an error. Disposing a pool will also terminate all workers created by the pool.

Contributing

The current API is ugly and should be considered unstable; expect changes to the API in the future. Contributions improving the usability of the API would be greatly appreciated, especially around the Triangle and MeshBuilder classes.

Future work

The Kanban for this library can be found here.

Summary:

• GLTF extension for edge connectivity. Need to work with the Manifold developers for this one
• Fix zigzag artifacts in UVs of extrusions
• Use angle-weighted vertex normals
• Improve solids of revolution:
  • Solid middles
  • Self-intersecting polylines
• Improve extrusions:
  • Allow slices with holes
• Mesh decimation utilities
• Better mesh to manifold conversion for user-provided meshes with no edge connectivity data

Credits

This project depends on:

• The Manifold library (Apache 2.0 license)
• Wonderland Engine, API found here (API under MIT license)
• gl-matrix (MIT license)

This projects uses following tooling:

• TypeScript (Apache 2.0 license)
• esbuild (MIT license)
• TypeDoc (Apache 2.0 license)
• ESLint (MIT license)
• TypeScript ESLint (BSD 2-clause license)
• npm-dts (MIT license)
• rimraf (ISC license)

This project reuses some procedural mesh generation code from the OctreeCSG-ea library, which is a fork of the OctreeCSG library.

Finally, the following resources were used to implement some algorithms:

• Computational Geometry: Algorithms and Applications (Mark de Berg, Otfried Cheong, Marc van Kerveld, Mark Overmars) - used for the triangulation algorithm
• Computation of Rotation Minimizing Frames (Wenping Wang, Bert Juttler, Dayue Zheng, and Yang Liu) - used for curve frame generation