homebridge-apc-snmp v1.2.3

homebridge-apc-snmp

APC UPS SNMP plugin for homebridge - Version 1.2.0

https://www.npmjs.com/package/homebridge-apc-snmp https://git.multilan.de/tarek/homebridge-apc-snmp-platform.git

Tested with an APC SmartUPS 750 RM (SUA750RMI2U) with the AP9606 Web/SNMP Card

Getting Started

1. Install "homebridge-apc-snmp" using the Web UI or "npm install homebridge-apc-snmp"
2. Create a new accessory config entry
3. Set the accessory setting to ups
4. Choose a name for your accessory using the name setting, for example UPS
5. Add an address entry and set it to your address of the SNMP host, for example 10.0.30.3
6. Add a community entry and set it to a community that has write access, for example private
7. (You can add multiple entries, if you have more than one UPS)
8. Save the config and restart Homebridge

Config Flags

accessory - Has to be ups

name - Friendly name of the accessory

community - SNMP community name

address - IP address of the SNMP device

enable_non_graceful* - Non Graceful* power switch function

enable_graceful* - Graceful* power switch function

enable_alarm** - Switch for enabling or disabling the alarm

enable_self_test** - Switch for starting a self test

enable_temp** - Internal temperature function

enable_battery** - Battery state of charge indicator

update_interval*** - Update interval in seconds

Values are enabled by default * Default value is 20 seconds

Example Config

{
  "accessory": "ups",                
  "name": "UPS",                     
  "community": "private",             
  "address": "10.0.30.3"
}