Homebridge-awair-local NPM

homebridge-awair-local

Awair plugin for homebridge: https://github.com/nfarina/homebridge

Based on the great work of @henrypoydar.

This is a very basic plugin for Nfarina's amazing Homebridge project. It will fetch current sensor conditions from an Awair device (e.g. Awair Mint, Awair Omni, Awair Element, or Awair 2nd Edition) and provide available sensor readings (e.g. temperature, humidity, carbon dioxide, TVOC, and PM2.5) information for HomeKit.

You can look at the current Awair information via HomeKit enabled Apps on your iOS device or even ask Siri for them.

It will get new data once every 10 seconds (default), but it can be customized in config.json.

Installation

Install homebridge using: [sudo] npm install -g homebridge
Install this plugin using: [sudo] npm install -g homebridge-awair-local
Update your configuration file. See the sample below.

~You'll need to request permission to use the "Local Sensors" feature by emailing: developer at getawair dot com or filling out this Beta list form: https://forms.gle/DmRyqwSS23Wvm6zf6~ Filling out the form is no longer needed (unless you have an unsupported device_type). You can find this Beta feature in Device Settings (gear icon) > Developer Option > Enable Local Sensors of the Awair Home app. (note: even though the button will return to "blue" if you return, the feature should still be enabled, unless you Factory Reset the device.)

Once the feature is enabled, visit the IP Address of your device (found in your router settings). From this page, you can find 2 endpoints:
http://X.Y.Z.W/air-data/latest (every time you refresh this page, the latest sensor values that are available will be presented)
http://X.Y.Z.W/settings/config/data (this page displays device settings, such as device_uuid) For example (an Omni):

{"device_uuid":"awair-omni_123","wifi_mac":"70:88:6B:12:XX:XX","ip":"192.168.1.X","netmask":"255.255.255.0","gateway":"192.168.1.254","fw_version":"1.1.9","timezone":"America/Los_Angeles","display":"score","led": {"mode":"auto","brightness":20},"power-status": {"battery":99,"plugged":true}}

Configuration

Configuration sample:

Add the following information to your config file (note: shown with (1) example device: Awair).

See config-sample.json

"accessories": [
	{
		"accessory": "AwairLocal",
		"name": "Example Room 1 Awair",
		"ip": "X.X.X.X",
		"manufacturer": "Awair",
		"devType": "awair",
		"devId": "123",
		"serial": "example-serial_123",
		"model": "Awair",
		"carbonDioxideThreshold": 1200,
		"carbonDioxideThresholdOff": 1000,
		"voc_mixture_mw": 72.66578273019740,
		"air_quality_method": "awair-score",
		"polling_interval": 10,
		"limit": 1,
		"logging": false
	}
]

Descriptions

	     `accessory`	=> The Homebridge Accessory (REQUIRED, must be exactly: `AwairLocal`)
		  `name`	=> The accessory name that appears by default in HomeKit (REQUIRED, can be anything)
		 	`ip`	=> The IP address or mDNS .local address (without http://) of the device on your network (REQUIRED)
	  `manufacturer`	=> Manufacturer (OPTIONAL, default = `Awair`)
	       `devType`	=> Device Type (REQUIRED, options: `awair-element`, `awair-mint`, `awair-omni`, or `awair-r2`)
		`serial`	=> Serial Number (OPTIONAL, default = `devType_devId`, options: `mac-address` or `devType_devId`)
		 `model`	=> Device Model (OPTIONAL, default = `devType`, options: `Awair`, `Awair Glow`, `Awair Glow C`, `Awair Element`, `Awair Mint`, `Awair Omni`, `Awair 2nd Edition`)
`carbonDioxideThreshold`	=> (OPTIONAL, default = `0` [i.e. OFF], the level at which HomeKit will trigger an alert for the CO2 in ppm)
`carbonDioxideThresholdOff`	=> (OPTIONAL, default = `0` [i.e. `carbonDioxideThreshold`], the level at which HomeKit will turn off the trigger alert for the CO2 in ppm, to ensure that it doesn't trigger on/off too frequently choose a number lower than `carbonDioxideThreshold`)
	`voc_mixture_mw`	=> The Molecular Weight (g/mol) of a reference gas or mixture that you use to convert from ppb to ug/m^3 (OPTIONAL, default = `72.66578273019740`)
    `air_quality_method`	=> Air quality calculation method used to define the Air Quality Chracteristic (OPTIONAL, default = `awair-score`, options: `awair-score`, `awair-aqi`, `awair-pm25`)
	       `polling`	=> The frequency (OPTIONAL, default = `10` (10 seconds), units: seconds, that you would like to update the data in HomeKit)
		   `url`	=> The Awair url to poll (OPTIONAL, default = `"http://" + this.ip + "/air-data/latest";`, EDITING NOT RECOMMENDED)
	       `logging`	=> Whether to output logs to the Homebridge logs (OPTIONAL, default = `false`)