homebridge-daikin-cloud-aerothermal v1.0.0

Homebridge Daikin Heat Pump Cloud plugin

This Homebrige plugin connects to the Daikin Cloud and loads your Heat Pump devices to be controled via Homebridge and Homekit.

This plugin will:

• Create a heat pump accesory, that will show current leaving water temperature, heating/cooling mode, offset
• Create a hot water tank accessory, that will show target temperature & current water tank temperature
• Create a temperature accessory that will show current outdoor temperature measured by outdoor heatpump device

You will be able to:

• Turn on/off heat pump or water tank
• Change Heat Pump mode (heating/cooling)
• Set temperature offset for heating/cooling

• Set temperature offset for hot watwer tank

Plugin settings

• You can disable on/off function
• You can disable hot water tank accessory (may be needed, if you don't own hot water tank device)
• You can disable outdoor temperature settings (may be needed, if you don't own hot water tank device)

Limitations

Daikin doesn't provide target Heater/Cooler temperature. So the temperature shown in this accessory is current leaving water temperature & target temperature is offset.

Current acessory state doesnt reflect if your device is idle/heating/cooling, because daikin doesn't provide this information (we only know the target state).

Even if you set "Disable on/off switch", you are still able to switch devices on/off in homebridge accessory page (it works fine in ios home).

Config

Add config object to the platform array in your Homebridge config.json.

{
    "bridge": {
        ...
    },
    "accessories": [],
    "platforms": [
        {
            "username": "<username>",
            "password": "<password>",
            "platform": "DaikinCloudAerothermal",
            "HotWaterTank": false, // true or false (boolean), default: false
            "OutdoorTemperature": true, // true or false (boolean), default: true
            "DisableOnOff": false //  true or false (boolean), default false
        }
    ]
}

Tested with devices

• EHVX08S23EJ6V (BRP069A78 wifi module)

Development

For running a local Homebridge setup: https://github.com/oznu/homebridge-config-ui-x#installation-instructions

Credits

This project is forked from https://github.com/FrAcTi0N/homebridge-daikin-cloud-heat-pump, which in turn was forked from https://github.com/JeroenVdb/homebridge-daikin-cloud, so special credits go to @FrAcTi0N and @JeroenVdb

Credits for the Daikin Cloud API goes to @Apollon77 for https://github.com/Apollon77/daikin-controller-cloud