Homebridge-deye NPM

Homebridge Deye

Connects the Deye dehumidifier to HomeKit and allows control via the native iOS Home App and Siri. This plug-in theoretically supports most Deye dehumidifiers.

中文说明｜ English

Function

Access to HomeKit as a dehumidifier device
Ambient temperature and humidity display
Dehumidifier water level display
Dehumidifier target humidity adjustment
Set the mode of dehumidifier. Sleep, Manual and Dry
Control fan speed (some models do not support this function)
Child lock (physical control lock)
HomeKit Automation

Supported devices

Theoretically, most Deye dehumidifiers can be connected.

The following devices have been tested.

Deye DYD-D50A3 (Touch Panel version) Link
Deye DYD-E12A3 Link

Screenshot

Installation

If you are new to Homebridge, please follow the documentation here to complete the installation of Homebridge and Homebridge Config UI X.

Installing the Dehumidifier plugin

sudo npm install -g homebridge-deye

Configuration

This plugin can be configured in Homebridge Config UI X, or manually.

You can use the Deye Device Information Getter to get the configuration information of your device.

Open Deye Device Information Getter, enter the cell phone number and password of your Deye account, and click Login. This page should display the server connection information and device information.

Please note: Since the Deye account only supports single-side login, it is normal that your App may receive a notification that "Your account is logged in elsewhere". This is normal.

Add the DEYE platform to config.json in the home directory within .homebridge.

Example configuration

{
    "`platforms`: [
        {
            "platform": "DEYE"
            "mqttBaseInfo": {
                "mqttHost": "yourmqtthost.com",
                "mqttPort": "1883",
                "endPoint": "b374fbd89bba44b28399d975fc82d8f5",
                "username": "b374fbd89bba44b28399d975fc82d8f5/9c2056e3f115459e9c88394217ee52fc",
                "password": "9c2056e3f115459e",
                "clientId": "app_34bc46389bc011ecb9090242ac120002"
            },
            "devices": [
                {
                    "name": "DYD-D50A3",
                    "model": "DYD-D50A3",
                    "productId": "97e85d3856c54a1ab090c8541101a050",
                    "deviceId": "5111127c8d6f4beca10861dfc5942949",
                    "fanControl": true,
                    "temperatureSensor": true,
                    "dryClothes": true,
                    "sleepMode": true
                }
            ]
        }
    ]
}

Platform configuration field

platform Required should be "DEYE".

Server connection configuration field `mqttBaseInfo`

mqttHost Required The address of the MQTT server.

mqttPort Required MQTT server port.

endPoint Required MQTT endPoint.

username required MQTT username.

password required MQTT password.

clientId Required MQTT client ID.

Device connection configuration fields `devices`

name required The name of the custom accessory.

model Required The device model. For example DYD-D50A3

productId required The productId you got.

deviceId required The deviceId you got.

fanControl Required Whether to enable the wind speed control function. Only supported by some models.

temperatureSensor Required Whether to enable the temperature sensor. May only be supported by some models.

Please note: When the temperature sensor is enabled, it will merge the accessories due to Apple HomeKit policy and you may not be able to see the humidifier control interface directly.

If this happens, tap the "Accessories" option in the Home App under Accessories and you will see information about the dehumidifier. Alternatively, you can choose to enable DryClothes mode or Sleep mode, and then click on "Show as separate panel" in Accessories in the Home App.

dryClothes Required Whether to enable the dry mode switch. May only be supported by some models.

sleepMode Required Whether to enable the sleep mode switch. May only be supported by some models.