Homebridge-nest-fletchto99 NPM

homebridge-nest

Nest plug-in for Homebridge using the native Nest API. See what's new in release 4.0.0.

Integrate your Nest Thermostat (including Nest Temperature Sensors), Nest Protect and Nest Cameras (including Nest Hello doorbell) devices into your HomeKit system. Both Nest Accounts (pre-August 2019) and Google Accounts are supported.

Currently, homebridge-nest supports all Nest Thermostat, Protect and Camera models, now including the EU/UK model of the Thermostat E with Heat Link. Nest Secure/Detect support may come later. (I don't currently own those devices.)

Starling Home Hub

If you want a plug-and-play Nest integration solution, check out Starling Home Hub. It's basically "homebridge-nest in a box" and connects to your home router, so you'll be up and running in minutes without needing to set up a Homebridge server or manually edit configuration files.

If you want a DIY solution, then read on, as homebridge-nest is for you!

Installation

Install homebridge using: npm install -g homebridge
Install this plug-in using: npm install -g homebridge-nest
If you want to use Nest Cameras, install ffmpeg
Update your configuration file. See example config.json snippet below.

You will need your Nest Account (or Google Account) email address and password - the same credentials you use with the Nest app. A 'Works With Nest' developer account and tokens are not required.

Configuration

Configuration sample (edit ~/.homebridge/config.json):

"platforms": [
        {
            "platform": "Nest",
            "email": "your Nest Account email address",
            "password": "your Nest Account password"
        }
    ],

Required fields when using a Nest Account:

"platform": Must always be "Nest"
"email": Your Nest Account email address
"password": Your Nest Account password

Required fields when using a Google Account: (see below for set-up info)

"platform": Must always be "Nest"
"googleAuth": Google authentication information (see below)

Required fields when using access token: (see below - you probably won't need this mode)

"platform": Must always be "Nest"
"access_token": Nest service access token

Optional fields:

"pin": "number" // PIN code sent to your mobile device for 2-factor authentication - see below (optional)
"structureId": "your structure's ID" // optional structureId to filter to (see logs on first run for each device's structureId) - Nest "structures" are equivalent to HomeKit "homes"
"options": [ "feature1", "feature2", ... ] // optional list of features to enable/disable (see 'Feature Options' below)
"fanDurationMinutes": number of minutes to run the fan when manually turned on (optional, default is 15)
"transcoder": { "command": "...", "maxFps": n, "maxStreams": n, "maxWidth": n } // transcoder settings (see below)

Transcoder settings (for Nest Cameras):

"command": "/path/to/ffmpeg" // set to the location of your ffmpeg binary, if it is not in the path
"maxFps": maximum video frames per second of output (useful on slow devices)
"maxStreams": maximum simultaneous video streams (set to 1 on slow devices), default is 2
"maxWidth": maximum width of output video feed (set to 640 on slow devices), default is 1280

Note that your installation of ffmpeg must include the libfdk_aac audio codec. If it does not, either find one that does, or you will need to set "Cam.Audio.Disable" in your "options" field to use your camera.

Using a Nest Account

Simply set "email" to your Nest Account email address, and "password" to your Nest Account password.

Two-factor authentication is supported if enabled in your Nest Account. On starting Homebridge, you will be prompted to enter a PIN code which will be sent to the mobile device number registered to your Nest Account.

If you are running Homebridge as a service, you cannot manually enter the PIN in the console. In this case, when you start Homebridge and receive the PIN code, edit config.json and add the PIN received under "pin" (see 'Configuration' above). Then, restart Homebridge. Using 2FA is not recommended if Homebridge is run as a service, because if the connection to the Nest service is interrupted for any reason, homebridge-nest will not be able to automatically reconnect.

Using a Google Account

Google Accounts (mandatory for new Nest devices after August 2019, with an optional migration for earlier accounts) are now supported. Setting up a Google Account with homebridge-nest is a pain, but only needs to be done once, as long as you don't log out of your Google Account.

Google Accounts are configured using the "googleAuth" object in config.json, which contains three fields, "issueToken", "cookies" and "apiKey", and looks like this:

      "googleAuth": {
        "issueToken": "https://accounts.google.com/o/oauth2/iframerpc?action=issueToken...",
        "cookies": "OCAK=TOMPYI3cCPAt...; SID=ogftnk...; HSID=ApXSR...; ...; SIDCC=AN0-TYt...",
        "apiKey": "AIzaS..."
      },

The values of "issueToken", "cookies" and "apiKey" are specific to your Google Account. To get them, follow these steps (only needs to be done once, as long as you stay logged into your Google Account).

Open a Chrome browser tab in Incognito Mode (or clear your cache).
Open Developer Tools (View/Developer/Developer Tools).
Click on 'Network' tab. Make sure 'Preserve Log' is checked.
In the 'Filter' box, enter issueToken
Go to home.nest.com, and click 'Sign in with Google'. Log into your account.
One network call (beginning with iframerpc) will appear in the Dev Tools window. Click on it.
In the Headers tab, under General, copy the entire Request URL (beginning with https://accounts.google.com, ending with nest.com). This is your "issueToken" in config.json.
In the 'Filter' box, enter oauth2/iframe
Several network calls will appear in the Dev Tools window. Click on the last iframe call.
In the Headers tab, under Request Headers, copy the entire cookie (include the whole string which is several lines long and has many field/value pairs - do not include the cookie: name). This is your "cookies" in config.json.
In the 'Filter' box, enter issue_jwt
Click on the last issue_jwt call.
In the Headers tab, under Request Headers, copy the entire x-goog-api-key (do not include the x-goog-api-key: name). This is your "apiKey" in config.json.
Do not log out of home.nest.com, as this will invalidate your credentials. Just close the browser tab.

Access Token Mode

If you use a Nest Account, as an alternative to specifying "email" and "password" in config.json, you may provide an "access_token" instead. This may be useful, for example, if your primary account has 2FA enabled and you are running Homebridge in a Docker container or similar where you cannot enter a PIN when Homebridge starts.

To generate the access token, the easiest way is to use the generateNestToken.sh script. It will ask for your email and password (and if you have 2FA enabled, the SMS code). Alternatively, you can log into home.nest.com from your browser and extract the token from the response of the session API call.

However, we don't recommend this usage - if the token expires, homebridge-nest will not be able to automatically reconnect. Instead, we recommend you use Nest's Family Sharing feature to create an alternative login to the service without 2FA, and use those credentials for homebridge-nest.

HomeKit Accessory Types

Home

Switch accessory (Home Occupied) indicating detected Home/Away state - can be manually changed

Nest Thermostat

Thermostat accessory with ambient temperature and humidity sensors, mode control (heat/cool/auto/off), and target temperature control
Switch accessory (Eco Mode) for turning on and off Eco Mode
Fan accessory for controlling the fan (except the EU/UK model of the Nest Thermostat E, which does not have a fan control)
TemperatureSensor accessory indicating the ambient temperature at the thermostat (disabled by default - temperature is reported by the base Thermostat accessory)
TemperatureSensor accessory indicating the ambient temperature where each additional Nest Temperature Sensor is located
HumiditySensor accessory indicating the relative humidity at the thermostat (disabled by default - humidity is reported by the base Thermostat accessory)

Nest Protect

SmokeSensor accessory (Smoke) indicating smoke detected
CarbonMonoxideSensor accessory (Carbon Monoxide) indicating CO detected
MotionSensor accessory (Motion) indicating motion detected near the Protect device (AC wired Protects only)

Nest Cameras (Indoor/Outdoor/IQ/Hello/Google Nest Hub Max)

Camera accessory showing live feed
MotionSensor accessory (Motion) indicating motion detected by the camera
MotionSensor accessory (Person) indicating person detected by the camera (requires Nest Aware subscription)
MotionSensor accessory (Sound) indicating sound detected by the camera
Doorbell accessory (Doorbell) for notifications when the doorbell is pressed (Nest Hello only)

Feature Options

Set "options" in config.json to an array of strings chosen from the following to customise feature options:

"Thermostat.Disable" - exclude Nest Thermostats from HomeKit
"Thermostat.Fan.Disable" - do not create a Fan accessory for the thermostat
"Thermostat.Eco.Disable" - do not create a Switch accessory to indicate/control Eco Mode status
"Thermostat.SeparateBuiltInTemperatureSensor.Enable" - create an additional TemperatureSensor accessory to report the ambient temperature at the thermostat
"Thermostat.SeparateBuiltInHumiditySensor.Enable" - create an additional HumiditySensor accessory to report the relative humidity at the thermostat
"Thermostat.EcoMode.ChangeEcoBands.Enable" - when set, changing temperature in Eco Mode changes Eco Temperature Bands (default is to turn off Eco Mode instead before setting temperature)
"TempSensor.Disable" - exclude Nest Temperature Sensors from HomeKit
"HomeAway.Disable" - exclude Home/Away switch from HomeKit
"HomeAway.AsOccupancySensor" - create Home/Away indicator as an OccupancySensor instead of a Switch - useful for automations
"HomeAway.AsOccupancySensorAndSwitch" - create Home/Away indicator as an OccupancySensor and a Switch
"Protect.Disable" - exclude Nest Protects from HomeKit
"Protect.MotionSensor.Disable" - disable MotionDetector accessory for Nest Protects
"Cam.Disable" - exclude Nest Cameras from HomeKit
"Cam.Audio.Disable" - disable microphone audio from cameras
"Cam.Doorbell.Disable" - disable Nest Hello doorbell function

By default, options set apply to all devices. To set an option for a specific device only, add .device_id to the corresponding option, where device_id is shown in the Homebridge logs, or in HomeKit itself as Serial Number in the Settings page for your device. For example, to disable one specific thermostat with serial number 09AC01AC31180349, add "Thermostat.Disable.09AC01AC31180349" to the "options" array.

Things to try with Siri

Hey Siri, set the temperature to 72 degrees. (in heat-only or cool-only mode)
Hey Siri, set the temperature range to between 65 and 70 degrees. (in auto mode, for systems that can heat and cool)
Hey Siri, set the thermostat to cool. (try heat, cool, auto, or off)
Hey Siri, turn on the air conditioning.
Hey Siri, turn Eco Mode on.
Hey Siri, what's the temperature at home?
Hey Siri, what's the temperature in the Basement? (get the temperature from a Nest Temperature Sensor)
Hey Siri, what's the status of my smoke detector?

Donate to Support homebridge-nest

homebridge-nest is a labour of love. It's provided under the ISC licence and is completely free to do whatever you want with. But if you'd like to show your appreciation for its continued development, please consider clicking here to make a small donation or send me a thank-you card:

Adrian Cable
PO Box 370365
Montara, CA 94037

I appreciate your feedback and support in whatever form!

homebridge-plugin nest

bluebird eslint ip lodash.debounce pbf promise-prompt protobufjs querystring request request-promise uuid varint

4.0.0

4 years ago