Homebridge-openwebif-tv NPM

Homebridge OpenWebIf TV

Homebridge plugin for Sat Receivers based on the OpenWebIf API. Tested with VU+ Ultimo 4K, Formuler F4 Turbo.

Package Requirements

Package	Installation	Role	Required
Homebridge	Homebridge Wiki	HomeKit Bridge	Required
Config UI X	Config UI X Wiki	Homebridge Web User Interface	Recommended
OpenWebIf TV	Plug-In Wiki	Homebridge Plug-In	Required

About The Plugin

Power ON/OFF short press tile in HomeKit app.
RC/Media control is possible after you go to the RC app on iPhone/iPad.
Speaker control is possible after you go to RC app on iPhone/iPad Speaker Service.
Legacy Volume and Mute control is possible throught extra lightbulb/fan (slider).
Channels can be changed using Channels selector in HomeKit.app, additionally can create separate tile.
Siri can be used for all functions, some times need create legacy buttons/switches/sensors.
Automations can be used for all functions, some times need create legacy buttons/switches/sensors.
Support external integration MQTT.

Run this plugin as a Child Bridge (Highly Recommended), this prevent crash Homebridge if plugin crashes.
Install and use Homebridge Config UI X to configure this plugin.
The sample-config.json can be edited and used as an alternative.
Be sure to always make a backup copy of your config.json file before making any changes to it.

Key	Description
`name`	Here set the accessory Name to be displayed in Homebridge/HomeKit.
`host`	Here set the Hsostname or Address IP of Sat Receiver.
`port`	Here set the Port of Sat Receiver.
`disableAccessory`	If enabled, the accessory will be disabled.
`auth`	If enabled, authorizatins credentials will be used for login.
`user`	Here set the authorization Username.
`pass`	Here set the authorization Password.
`getInputsFromDevice`	This function get channels by Bouquet direct from device, manually configured channels will be skipped.
`bouquets.name`	Here set Bouquet Name which should be loaded from device, only first 90 services will be used.
`bouquets.displayType`	Here select display extra tile for all channels of this bouquet to be exposed in HomeKit app, possible `0 - None/Disabled`, `1 - Outlet`, `2 - Switch`.
`inputsDisplayOrder`	Here select display order of the channels list, `0 - None`, `1 - Ascending by Name`, `2 - Descending by Name`, 3 - `Ascending by Reference`, `4 - Ascending by Reference`.
`inputs.name`	Here set Channel Name which should be exposed in the Homebridge/HomeKit
`inputs.reference`	Here set Channel Reference. All can be found in `homebridge_directory/openwebifTv/inputs_xxxx`.
`inputs.displayType`	Here select display extra tile for this channel to be exposed in HomeKit app, possible `0 - None/Disabled`, `1 -Outlet`, `2 - Switch`.
`buttons.name`	Here set Button Name which You want expose to the Homebridge/HomeKit.
`buttons.mode`	Here select button mode, `0 - Live TV Channel`, `1 - Remote Control`.
`buttons.reference`	Here set Reference, only for `Live TV Channel` mode, in other case leave empty.
`buttons.command`	Here select `Remote Control` command which will be assigned to the button.
`buttons.powerCommand`	Here select `Power Control` which will be assigned to the button.
`buttons.displayType`	Here select display type in HomeKit app, possible `0 - None/Disabled`, `1 - Outlet`, `2 - Switch`.
`buttons.namePrefix`	Here enable/disable the accessory name as a prefix for button name.
`sensorPower`	If enabled, then the Power will be exposed as a `Contact Sensor`, fired if power ON.
`sensorVolume`	If enabled, then the Volume will be exposed as a `Contact Sensor`, fired on every Volume change.
`sensorMute`	If enabled, then the Mute will be exposed as a `Contact Sensor`, fired if Mmute ON.
`sensorChannel`	If enabled, then the Channel will be exposed as a `Contact Sensor`, fired on every Channel change.
`sensorInputs`	Her create custom Inputs sensor, sensors will be exposed as a `Contact Sensor`, fired if switch to it.
`sensorInputs.name`	Here set own Name which You want expose to the Homebridge/HomeKit for this sensor.
`sensorInputs.reference`	Here set Reference like `1:0:1:3ABD:514:13E:820000:0:0:0:` to be exposed as sensor (active on switch to this Input).
`sensorInputs.displayType`	Here select sensor type to be exposed in HomeKit app, possible `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`.
`sensorInputs.namePrefix`	Here enable/disable the accessory name as a prefix for sensor name.
`volumeControlNamePrefix`	Here enable/disable the accessory name as a prefix for volume control name.
`volumeControlName`	Here set Your own volume control name or leave empty.
`volumeControl`	Here select volume control mode `0 -None/Disabled`, `1 - Slider`, `2 - Fan`.
`infoButtonCommand`	Here select the function of `I` button in RC app.
`refreshInterval`	Here set the data refresh interval.
`disableLogDeviceInfo`	If enabled, add ability to disable log device info by every connections device to the network.
`disableLogInfo`	If enabled, disable log info, all values and state will not be displayed in Homebridge log console.
`disableLogSuccess`	If enabled, disable logging device success.
`disableLogWarn`	If enabled, disable logging device warnings.
`disableLogError`	If enabled, disable logging device error.
`enableDebugMode`	If enabled, deep log will be present in homebridge console.
`mqtt`	This is MQTT Broker.
`enable`	If enabled, MQTT Broker will start automatically and publish all awailable PV data.
`host`	Here set the `IP Address` or `Hostname` for MQTT Broker.
`port`	Here set the `Port` for MQTT Broker, default 1883.
`clientId`	Here optional set the `Client Id` of MQTT Broker.
`prefix`	Here set the `Prefix` for `Topic` or leave empty.
`auth`	If enabled, MQTT Broker will use authorization credentials.
`user`	Here set the MQTT Broker user.
`passwd`	Here set the MQTT Broker password.
`debug`	If enabled, deep log will be present in homebridge console for MQTT.

Direction	Topic	Message	Payload Data
Publish	`Info`, `State`	`{"inStandby": true, "volume": 100}`	JSON object.
Subscribe	`Set`	`{"Power": true}`	JSON object.

Subscribe	Key	Value	Type	Description
OpenWebIf
	`Power`	`true`, `false`	boolean	Power state.
	`Channel`	`1:0:1:3DD3:640:13E:820000:0:0:0:`	string	Set channel.
	`RcControl`	`168`	string	Send RC command.
	`Volume`	`55`	integer	Set volume.
	`Mute`	`true`	boolean	Toggle mute.

7 months ago

7 months ago

9 months ago

9 months ago

9 months ago

8 months ago

8 months ago

8 months ago

8 months ago

8 months ago

6 months ago

6 months ago

6 months ago

6 months ago

6 months ago

6 months ago

6 months ago

6 months ago

6 months ago

6 months ago

8 months ago

8 months ago

8 months ago

8 months ago

8 months ago

8 months ago

8 months ago

8 months ago

8 months ago

8 months ago

8 months ago

7 months ago

7 months ago

9 months ago

10 months ago

9 months ago

9 months ago

10 months ago

8 months ago

6 months ago

6 months ago

10 months ago

7 months ago

10 months ago

10 months ago

10 months ago

10 months ago

11 months ago

11 months ago

11 months ago

11 months ago