0.2.0 • Published 6 years ago
homebridge-picamera-lightsensor v0.2.0
homebridge-picamera-lightsensor
This is a homebridge plugin which uses the raspberry-pi camera to emulate a ambientlight sensor
Configuration
"accessories": [
{
"accessory": "PiCameraLightsensor",
"name": "LightSensor",
"poll_interval": 300
}
]
Parameter
- poll_interval: seconds between measurements (default: 300)
- from_left_percent: left edge from where the calculation should start (default: 0)
- to_right_percent: right edge where the calculation should end (default: 100)
- from_top_percent: top edge from where the calculation should start (default: 0)
to_bottom_percent: bottom edge where the calculation should stop (default: 100)
The following configuration example uses the top/right quarter of the image for the brigthness-calculation
"accessories": [ { "accessory": "PiCameraLightsensor", "name": "LightSensor", "poll_interval": 300, "from_left_percent": 50, "to_right_percent": 100, "from_top_percent": 0, "to_bottom_percent": 50, } ]
History
0.2.0
- remove "take photo" logging
- ability to define the area of the image which should be used for brightness calculation
0.1.0
- First working version
ToDo
remove loggingconfigurable measurement area (e.g. whole image, top/left, ...)- add optional correction-factor for lux-value
What else
Like this? Please buy me a beer :beers: ...