iat_k1 v1.0.0

Pe Design 10 Crack !FREE! 168

Download File ->>->>->> https://tinurll.com/2th87q

after we took our measurements, we fitted a two-stage fractal model of the crack lines. this model has been widely applied to simulate the crack roughness of reinforcement. the first stage is the hierarchical model of the material, which can be used to compute the material fatigue life. the second stage of the model is the crack parameter space. for each crack line in the first stage, the second stage computes an average crack line (acl). this acl is the average value for the distance from the start of the crack to the lines end point. in our study, the crack width was calculated by using these two stages of the model to represent the fractal roughness of the crack lines. we calculated the average value for the crack width of crack lines in the fracture section from the outer surface to the inner surface of the specimen.

after we took our measurements, we fitted a two-stage fractal model of the crack lines. this model has been widely applied to simulate the crack roughness of reinforcement. the first stage is the hierarchical model of the material, which can be used to compute the material fatigue life. the second stage of the model is the crack parameter space. for each crack line in the first stage, the second stage computes an average crack line (acl). this acl is the average value for the distance from the start of the crack to the lines end point. in our study, the crack width was calculated by using these two stages of the model to represent the fractal roughness of the crack lines. we calculated the average value for the crack width of crack lines in the fracture section from the outer surface to the inner surface of the specimen. 84d34552a1