iobroker.multicast v0.1.6

Tests::

Multicast-APi adapter for ioBroker

This adapter provides an API based on multicast communication protocol to send and receive states to devices with custom firmware.

Purpose of this adapter was :

• provide an alternative to http post and MQTT protokoll
• Have a uniform API available based on multicast communication and JSON formatted data transmission
• Have a zero-touch adapter in place to integrate any ethernet device (example : ESP based board eq Wemos D1 mini), like Vansware/Gosound smart plugs or other custom build automation.

Zero touch ?

The APi is build in a way that requires no additional configuration of end-user using in the adapter itself, or the device to be used. I case Wi-Fi transition is used, only the Wi-Fi credential must be provided (lan based devices will be handled fully automatically). This requires effort by the developer of binary file to be flashed on the related chipset (like ESP based chipsets).

When the firmware follows all rules of the APi (see further below) the communication is handled as following :

• Device sends state values by UDP multicast
• Adapter recognizes this message and checks if states for this device are present in ioBroker

New Device

From a previous message the adapter indicated no device found, following routine will be handled :

• ioBroker sends broadcast message to initialize device
• Device sends alle states and related structure to ioBroker
• ioBroker create the new device and all required states
• When all states are created, ioBroker sends a handshake to the device "ready to receive data"
• Device start sending his states in intervals or by changes (as defined by firmware configuration)

Existing Devices reconnection

From a previous message the adapter indicated device already exist, following routine will be handled :

• ioBroker checks if configuration is set to "restore"
• When restore is activated, ioBroker sends all states (except info states) to the device
• When all states are received, the de device sends a handshake to ioBroker "ready to receive data"
• ioBroker confirms
• Device start sending his states in intervals or by changes (as defined by firmware configuration)

State changes

The adapter is build to send up to 5-times a retry to ensure all state changes are received by the device. This procedure is handled as following :

• State is changed in ioBroker
• Adapter recognizes the value change and will send the new value to the device
• The device must confirm the message within 500ms
• If message is not confirmed, the adapter will resend the value again
• This will be handle up to a maximum of 5 retry, after that an error message will indicate communication lost

APi structure and documentation

{ to be done / in progress }

To-Do planned :

• Implement queuing, wait 20ms after state change for a device and send an array with all state updates
• Implement expire value by API
• Optimise state retry, dont fire every 500ms more queuing
• Send recovery data if Harbert is received and connection to device is FALSE
• Implement states (capability for value list)
• Correct handling of hostname and hostname changes

Changelog

0.1.6 (2021-03-23)

• (DutchmanNL) Dependency updates

0.1.5

• (Dutchman & Andiling) Stable-Release candidate

0.1.4

• (DutchmanNL) Fix Device Name
• (DutchmanNL) improved way of handling info channel values compatible with old firmware

0.1.3

• (Dutchman) Optimise state retry, don't fire every 500ms more queuing
• (Dutchman) Send recovery data if Harbeat is received and connection to device is FALSE
• (Dutchman) Implement states (capability for value list)

0.1.2

• (Dutchman) Optimise state retry, don't fire every 500ms more queuing
• (Dutchman) Correct handling of hostname and hostname changes

0.1.1

• (Dutchman) Send recovery data if Harbeat is received and connection to device is FALSE
• (Dutchman) Implement states (capability for value list)

0.1.0

• (Dutchman & Andiling) initial release

License

MIT License

Copyright (c) 2021 Dutchman & Andiling

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.