Json-immutability-helper NPM

JSON Immutability Helper

JSON-serialisable mutability helpers for both client- and server-side code.

Originally based on immutability-helper, with list, string and mathematical commands added, but now uses an alternative syntax.

This library includes helpers for integrating with React / preact apps using hooks, but can also be used indepenently.

Install dependency

npm install --save json-immutability-helper

Motivation

When working with collaborative state shared over a network, it can be desirable to share state deltas rather than full state objects. This allows parallel editing from different editors, and reduces bandwidth requirements.

Sharing functions between browsers and servers is not desirable, as it introduces security concerns. Instead, this package provides a foundational set of primitive operations which cover typical mutations.

Because the operations are intended to be shared, all inputs are assumed to be potentially malicious, with necessary mitigations applied.

Usage

The core function update takes an object and a spec, and returns an updated object. The input object and spec are unchanged (considered immutable).

Optimisations ensure that if any properties within the object are unchanged, they will be returned exactly (not a copy). This helps when detecting changes using shallow comparison.

Simple usage:

const { update } = require('json-immutability-helper');

const initialState = { foo: 3 };

const updatedState = update(initialState, { foo: ['+', 1] });
// updatedState = { foo: 4 }
// initialState is unchanged

You can define arbitrary hierarchies:

const { update } = require('json-immutability-helper');

const initialState = { foo: { bar: { baz: 1 } } };

const updatedState = update(initialState, {
  foo: {
    bar: {
      baz: ['=', 7],
    },
    extra: ['=', 1]
  },
});
// updatedState = { foo: { bar: { baz: 7 }, extra: 1 } }

Note that arrays in the spec define commands. To navigate to a particular item in an array, use a number as an object key:

const { update } = require('json-immutability-helper');

const initialState = { foo: [2, 8] };

const updatedState = update(initialState, {
  foo: {
    0: ['=', 5],
  },
});
// updatedState = { foo: [5, 8] }

// To serialise as JSON, you can quote the index:

const spec = `
{
  "foo": {
    "0": ["=", 5]
  }
}
`;

With list commands (note .with(listCommands)):

const listCommands = require('json-immutability-helper/commands/list');
const { update } = require('json-immutability-helper').with(listCommands);

const initialState = {
  items: [
    { myId: 3, myThing: 'this' },
    { myId: 28, myThing: 'that' },
  ],
};

// Change the property 'myThing' of the first item with myId=3
const updatedState = update(initialState, {
  items: [
    'update',
    ['first', ['myId', 3]],
    { myThing: ['=', 'updated this'] },
  ],
});

// Note that the spec is fully JSON-serialisable:

const spec = `
{
  "items": [
    "update",
    ["first": ["myId", 3]],
    { "myThing": ["=", "updated this"] }
  ]
}
`;
const updatedJsonState = update(initialState, JSON.parse(spec));

Locators

The main concepts introduced in this project are conditions and locators. Several commands use conditions to decide which items to update, such as if, update, delete, insert, and move, among others.

Locators match items in a list. The available locators are:

'all' - matches all items in a list
'first' - matches the first item in a list
'last' - matches the last item in a list
['all', <condition>] - matches all items which meet the condition
['first', <condition>] - matches the first item which meets the condition
['last', <condition>] - matches the last item which meets the condition

first and last are "single" locators (they match a maximum of 1 item and can be used as both single-locator and multi-locators). all is a "multi" locator (matching an unlimited number of items and can only be used as a multi-locator).

const items = [1, 2, 3, 4];

const updatedItems = update(items, [
  'update',
  'last',
  ['=', 5],
]);

// updatedItems = [1, 2, 3, 5];

Conditions

Conditions have a similar structure to specs; object hierarchies define property access, and arrays define the conditions themselves:

const items = [{ id: 1 }, { id: 2 }, { id: 3 }, { id: 4 }];

const updatedItems = update(items, [
  'delete',
  ['first', { id: ['=', 3] }],
]);

// updatedItems = [{ id: 1 }, { id: 2 }, { id: 4 }];

Generic conditions

['=', <expected>] matches if the value equals expected (if multiple values are provided, this checks if the value matches any of them). Note that this uses Object.is matching, so null and undefined are distinct, and objects / arrays will never compare equal (only test primitive types).
['!=', <expected>] matches if the value does not equal expected (if multiple values are provided, this checks if the value does not match any of them)
['~=', <expected>] matches if the value loosely equals expected (if multiple values are provided, this checks if the value matches any of them)
['!~=', <expected>] matches if the value does not loosely equal expected (if multiple values are provided, this checks if the value does not match any of them)
['>', <threshold>] matches if the value is strictly greater than threshold
['>=', <threshold>] matches if the value is greater than or equal to threshold
['<', <threshold>] matches if the value is strictly less than threshold
['<=', <threshold>] matches if the value is less than or equal to threshold
['exists'] matches if the value is set to any value (is not undefined)
['and', <condition1>, <condition2>, ...] matches if all of the sub-conditions match
['or', <condition1>, <condition2>, ...] matches if any of the sub-conditions match
['not', <condition>] negates the sub-condition

List conditions

Use .with(listCommands) to enable these conditions.

['some', <condition>] matches if any item in the list matches the sub-condition
['every', <condition>] matches if every item in the list matches the sub-condition
['none', <condition>] matches if no items in the list match the sub-condition (equivalent to ['not', ['some', <condition>]])
['length', <condition>] checks the length of the list using the given condition

Extending

You can add new conditions with:

const modifiedUpdate = update.with({
  conditions: {
    // example: >
    myGreaterThan: (parameters, context) => (actualValue) => {
      // actualValue is the value of the object being tested

      return actualValue > parameters[0];
    },

    // example: and
    myAnd: (parameters, context) => (actualValue) => {
      const predicates = parameters.map((c) => context.makeConditionPredicate(c));
      return (v) => predicates.every((p) => p(v));
    },
  },
});

Commands reference

Generic

['=', value] sets the value to the literal value given.
['unset'] deletes the value. If the parent is an object, the property is removed. If the parent is an array, the element is removed and subsequent items re-packed. If used on the root, update will return undefined (unless allowUnset is specified).
['init', value] if undefined, sets the value to the literal value given. Otherwise leaves the value unchanged.
['if', condition, spec, elseSpec?] applies the given spec if the condition matches, otherwise applies the elseSpec (if provided) or does nothing.
['seq', specs...] applies the given specs sequentially. This can be used to create complex updates out of simple operations.
```
// Computes (value + 2 - 10)
const updated = update(state, [
  'seq',
  ['+', 2],
  ['-', 10],
]);
```
(note that for mathematical operations it is usually better to use rpn, described below).

Object

['merge', object, initial?] Merges the keys of object into the current target. Similar to calling Object.assign. Note that any values set to undefined will be skipped (to avoid behaviour differences after a JSON round-trip). If initial is provided and the target value is undefined, it will be assigned the value of initial before merging (equivalent to ['seq', ['init', initial], ['merge', object]]).

Boolean

['~'] toggles the current value (true → false; false → true).

List

Use .with(listCommands) to enable these commands.

['push', items...] inserts one or more items at the end of the array.
['unshift', items...] inserts one or more items at the start of the array.
['addUnique', items...] inserts one or more items at the end of the array if they are not already present in the array. Note that this only works with primitive values (strings / numbers / booleans). For more complex objects, consider defining your own condition:
```
[
  'if',
  ['none', { id: ['=', newID] }],
  ['push', { id: newID, etc }],
]
```
['splice', arguments...] invokes splice on the array repeatedly. Each argument should be an array of parameters to send the splice function; [offset, length, items...]. Note that offset can be negative to count from the end of the array.
['insert', 'before' | 'after', multi-locator, items...] inserts one or more items before or after the item identified by the locator (or at the start / end of the array if no items match, depending on the locator type).
['update', multi-locator, spec, elseInsert?] applies the given spec to items in the array which match the locator. If no item matches and elseInsert is set, this inserts a new item (at the end of the array) and applies the spec to it.
['delete', multi-locator] deletes items in the array which match the locator. If no items match, does nothing.
['swap', single-locator, single-locator] swaps the positions of the two items matching the given locators. If either locator does not find a match, does nothing.
['move', multi-locator, 'before' | 'after', single-locator] moves all the items matching the multi-locator before or after the item matching the single locator (preserving their original order). If either locator does not find a match, does nothing.

String

Use .with(stringCommands) to enable these commands.

['replaceAll', search, replace] replaces all occurrences of search in the string with replace. Note that the search is used as a literal, not as a regular expression.
['rpn', operations...] reverse Polish notation command; see below for details.

Number

['+', value] adds the given value to the current value. This is available in the default command set and does not need an extension.
['-', value] subtracts the given value from the current value. This is available in the default command set and does not need an extension.

Use .with(mathCommands) to enable the following command:

['rpn', operations...] reverse Polish notation command; see below for details.

`rpn`

The rpn command lets you specify updates in reverse Polish notation. This is especially useful for applying complex mathematical operations or string manipulations.

Some examples:

// compute x * 2
update(5, ['rpn', 'x', 2, '*']); // = 10

// compute x * 2 + 10
update(5, ['rpn', 'x', 2, '*', 10, '+']); // = 20

// compute sin(x) + 2 * cos(x)
update(5, ['rpn', 'x', 'sin', 2, 'x', 'cos', '*', '+']); // ~= -0.3916

String manipulation is also supported, but should only be enabled if needed due to its ability to construct large strings, which could be used by malicious clients to launch memory exhaustion attacks against a server. To enable string manipulation, use .with(stringCommands):

const stringCommands = require('json-immutability-helper/commands/string');
const { update } = require('json-immutability-helper').with(stringCommands);

// compute x.substr(4, 3)
update('foo bar baz', ['rpn', 'x', 4, 3, 'substr']); // = bar

// compute x.leftPad(2)
update('3', ['rpn', 'x', 2, 'leftPad']); // = 03

Some functions accept optional parameters or are variadic. By default it is assumed that the minimum number of parameters are passed to each function. To specify a different number, add :<num> to the end of the function name:

// compute max(x, -x, 2)
update(4, ['rpn', 'x', 'x', 'neg', 2, 'max:3']); // = 4

// compute log_2(x)
update(8, ['rpn', 'x', 2, 'log:2']); // = 3

String literals can be specified as JSON-encoded strings (this means that for transport, strings may be double-encoded). For example: '"foo"'.

Available constants:

x: the old value
pi: the mathematical constant π (3.141…)
e: the mathematical constant e (2.718…)
Inf: positive infinity
NaN: not-a-number

Available functions/operators from mathCommands:

value 'Number': converts the value to a number
a b '+': adds two numbers
a b c ... '+:n': adds many numbers
a b '-': subtracts b from a
a b '*': multiplies two numbers
a b '/': divides a by b
a b '//': divides a by b, returning the truncated integer result
a b '^': raises a to the power of b
a b '%': returns the remainder of a / b (can be negative)
a b 'mod': returns the positive remainder of a / b
a 'neg': negates a
a 'abs': returns the absolute value of a
value 'log': returns the natural logarithm of value
value base 'log:2': returns the logarithm of value in base base
value 'log2': returns the logarithm of value in base 2 (same as value 2 'log:2')
value 'log10': returns the logarithm of value in base 10 (same as value 10 'log:2')
value 'exp': returns the exponent of value (i.e. e^value)
value base 'exp:2': returns base^value
v1 v2 v3 ... 'max:n': returns the largest value (the default arity is 2)
v1 v2 v3 ... 'min:n': returns the smallest value (the default arity is 2)
a b 'bitor': returns the bitwise-or of a and b
a b 'bitand': returns the bitwise-and of a and b
a b 'bitxor': returns the bitwise-xor of a and b
a 'bitneg': returns the bitwise negation of a
x 'sin': returns sin(x) in radians
x 'cos': returns cos(x) in radians
x 'tan': returns tan(x) in radians
x 'asin': returns asin(x) in radians
x 'acos': returns acos(x) in radians
x 'atan': returns atan(x) in radians
x 'sinh': returns sinh(x)
x 'cosh': returns cosh(x)
x 'tanh': returns tanh(x)
x 'asinh': returns asinh(x)
x 'acosh': returns acosh(x)
x 'atanh': returns atanh(x)
x 'round': rounds x to the nearest integer ("round halves-up") (for control over the number of decimal places, see 'String')
x 'floor': returns the highest integer which is less than or equal to x ("round down")
x 'ceil': returns the lowest integer which is greater than or equal to x ("round up")
x 'trunc': returns the largest integer with absolute value less than or equal to abs(x) ("round towards zero")

Available functions/operators from stringCommands:

value 'String': converts the value to a string
value dp 'String:2': converts the value to a rounded string (decimal places can be a positive or negative integer)
string 'length': returns the length of string in characters
a b c ... 'concat:n': concatenates strings (the default arity is 2)
string count 'repeat': repeats string count times
string search 'indexOf': returns the index of the first occurrence of search in string (0-based), or -1 if it is not found
string search start 'indexOf:3': returns the index of the first occurrence of search in string, skipping the first start characters
string search 'lastIndexOf': returns the index of the last occurrence of search in string (0-based), or -1 if it is not found
string search end 'lastIndexOf:3': returns the index of the last occurrence of search in string within the range up to end
string length 'padStart': pads the start of string with spaces until it is at least length characters long
string length padding 'padStart:3': pads the start of string with padding until it is at least length characters long (fragments of the padding string may be used)
string length 'padEnd': pads the end of string with spaces until it is at least length characters long
string length padding 'padEnd:3': pads the end of string with padding until it is at least length characters long (fragments of the padding string may be used)
string from 'slice': returns a substring of string from from to the end of the string. If from is negative, it counts from the end of the string.
string from to 'slice:3': returns a substring of string from from to to (exclusive). If from or to are negative, they count from the end of the string.
string from length 'substr': returns a substring of string from from of length length. If from is negative it counts from the end of the string.

As a basic protection against memory exhaution attacks, the generated string length for all operations is capped to 1024 characters, and String only accepts decimal places within the range -20 – 20. These restrictions ensure that memory usage can only be linear in the number of operations, but could still become very high. As the risk cannot be fully mitigated, string operations are disabled by default and must be explicitly enabled by using stringCommands.

Other context methods

You can access the default context, or create your own scoped context:

const defaultContext = require('json-immutability-helper');

const defaultContext = require('json-immutability-helper');
const myContext = defaultContext.with(/* extensions here */);

.with(...extensions) returns a new context which copies the current context with the given extensions added. Does not mutate the current context. If called with no extensions, this just makes a copy of the current context, though this is generally not useful (the context is immutable anyway).
Extensions can be:
- listCommands: require('json-immutability-helper/commands/list')
- mathCommands: require('json-immutability-helper/commands/math')
- stringCommands: require('json-immutability-helper/commands/string')
Or a custom extension (all fields are optional; any omitted field is left unchanged):
```
const myExtension = {
  commands: {
    myCommand: (object, args, context) => newValue,
    /* etc. */
  },
  conditions: {
    myCondition: (params, context) => (actual) => boolean,
    /* etc. */
  },
  limits: {
    stringLength: 1024,
    recursionDepth: 10,
    recursionBreadth: 10000,
  },
  isEquals: Object.is,
  copy: (o) => myCopyFunction(o),
}
```
The commands section defines new commands which can be used in the same places as built-in commands. object is the previous value for the current position. args is an array of parameters (excluding the command name). context is an object which contains the methods listed here, as well as update.
The conditions section defines new conditions which can be used in the same places as built-in conditions.
The limits are used by various built-in commands to ensure resource usage does not grow too high. You can omit the entire section or individual entries to leave the defaults, or specify higher or lower limits.
isEquals is the function used internally to determine whether a command caused a value to change (if this returns false, the original value will be used rather than the new value)
copy is the function used internally to make shallow copies of data structures. The default implementation can clone objects, arrays, and primitive values.
Note that as a convenience it is also possible to call .with on the update function itself. This does the same thing, but returns a new update function rather than a new context (equivalent to calling update.context.with(...).update).
.combine(specs) generates a single spec which is equivalent to applying all the given specs sequentially. Conceptually this is identical to using ['seq', ...specs], but combine optimises common paths where possible. Note that the specs must be provided in an array, not as variadic parameters.
.makeConditionPredicate(condition) generates a predicate for the provided condition. This should be used by custom commands when filtering based on a provided condition is required.
.invariant(check, message?) throws an exception if check is false. Includes the message if specified (can be a string or a function which returns a string).

The default context's update, combine and invariant are also available as direct imports:

const { update, combine, invariant } = require('json-immutability-helper');

Extending with .with()

By default, json-immutability-helper exposes minimal commands for reduced code size and increased security. If you need additional commands, you can add built-in extensions (see the command list above to see which commands need which extensions). Note that if you do not need a particular extension you should not enable it, as all of these have tradeoffs with bundle size and potential attacks (e.g. resource exhaustion by generating large strings).

const listCommands = require('json-immutability-helper/commands/list');
const mathCommands = require('json-immutability-helper/commands/math');
const stringCommands = require('json-immutability-helper/commands/string');
const { update } = require('json-immutability-helper').with(listCommands, mathCommands, stringCommands);

or with ES6 imports:

import listCommands from 'json-immutability-helper/commands/list';
import mathCommands from 'json-immutability-helper/commands/math';
import stringCommands from 'json-immutability-helper/commands/string';
import context from 'json-immutability-helper';

const { update } = context.with(listCommands, mathCommands, stringCommands);

Avoid calling .with inside functions or in loops. Ideally it should be called once, and the resulting update function can be called many times.

Helpers

Some common helpers are also included:

const { getScopedState, makeScopedSpec, makeScopedReducer } = require('json-immutability-helper/helpers/scoped');
const { makeHooks } = require('json-immutability-helper/helpers/hooks');

`getScopedState(context, state, path[, defaultValue])`

const context = require('json-immutability-helper');
const { getScopedState } = require('json-immutability-helper/helpers/scoped');

const value = { foo: { bar: [{ baz: 7 }] } };
const sub = getScopedState(context, value, ['foo', 'bar', 0, 'baz']);
// sub = 7

const value2 = { foo: [{ id: 1, bar: 'a' }, { id: 2, bar: 'b' }] };
const sub2 = getScopedState(context, value, ['foo', { id: ['=', 2] }]);
// sub2 = { id: 2, bar: 'b' }

Navigates multiple layers of the object, returning the state at the requested path, or the default value / undefined if any part of the path could not be followed.

The path elements can be:

strings (object lookup)
integer numbers (array lookup)
Conditions (see above)

Note that because state is immutable, this is a static copy of the current state; it will not automatically update to reflect changes to the original state.

`makeScopedSpec(path, spec[, options])`

const { makeScopedSpec } = require('json-immutability-helper/helpers/scoped');

const subSpec = makeScopedSpec(['foo', 'bar', 0, 'baz'], ['=', 7]);
// subSpec = { foo: { bar: { 0: { baz: ['=', 7] } } } }

const subSpec2 = makeScopedSpec(['foo', { id: ['=', 2] }, 'bar'], ['=', 7]);
// subSpec2 = { foo: ['update', ['all', { id: ['=', 2] }], { bar: ['=', 7] }] }

Wraps the given spec in a nested path. This is the spec equivalent to fetching a sub-state from a state using getScopedState.

The path elements can be:

strings (object lookup)
integer numbers (array lookup)
Conditions (see above)

The available options are:

initialisePath (boolean, defaults to true if initialiseValue is set, else false): if true, any missing path elements will be initialised automatically as either empty objects or empty arrays (depending on the index type):
```
const subSpec = makeScopedSpec(['foo', 0], ['=', 7], { initialisePath: true });
// subSpec = ['seq', ['init', {}], { foo: ['seq', ['init', []], { 0: ['=', 7] }] }]
```
initialiseValue (value, defaults to undefined): if set, the innermost element will be initialised to this value if it is not already set, before the spec is applied.
```
const subSpec = makeScopedSpec(['foo', 0], ['+', 1], { initialiseValue: 0 });
// subSpec = { foo: { 0: ['seq', ['init', 0], ['+', 1]] } }
```

`makeScopedReducer(context, reducer, path[, options])`

Returns a scoped reducer (an object containing { state, dispatch } which delegates to the given reducer (also an object containing { state, dispatch }). Uses getScopedState and makeScopedSpec internally.

Note that because state is immutable, the returned state is a static copy of the current state; it will not automatically update to reflect changes to the original state (nor will it update if the returned dispatch method is called).

The available options are:

initialisePath (boolean, defaults to true if initialiseValue is set, else false): if true, the dispatch will automatically initialise any missing path elements as either empty objects or empty arrays (depending on the index type):

initialiseValue (value, defaults to undefined): returned if the value at the given path is not set. Also applied as an init value when dispatching changes.

const sub = makeScopedReducer(context, reducer, ['foo'], { initialiseValue: [] });
sub.dispatch(['push', 1]); // safe even if foo was not already set, because it will be initialised to [] first

`makeHooks(path, spec)`

const React = require('react');
const context = require('json-immutability-helper');
const { makeHooks } = require('json-immutability-helper/helpers/hooks');

const { useJSONReducer, useWrappedJSONReducer, useScopedReducer } = makeHooks(context, React);

This is a convenience for making common React (or Preact) hooks from the context. The second argument should be an object which contains at least:

useState
useRef
useLayoutEffect or useEffect
optionally useMemo
optionally useReducer

For React, the main React object covers this requirement. For Preact, you can use the preact/hooks extension.

The returned hooks are:

useJSONReducer(initialArg, init?): wraps React's useReducer, with context.update as the reducer. Returns an object with { state, dispatch }.
useWrappedJSONReducer(next): same as useJSONReducer, but delegates storage to next, which should be a 2-element array: [state, setState] (as returned from e.g. useState). Returns an object with { state, dispatch }.
useScopedReducer(reducer, path, options?): returns a scoped reducer, using getScopedState and makeScopedSpec internally. The reducer parameter should be an object with { state, dispatch } (as returned by useJSONReducer / useWrappedJSONReducer, or another useScopedReducer).
The available options are the same as for makeScopedReducer.

The returned dispatch functions are always stable references. The returned objects are memoised, so only change when the state changes (unless useMemo was not provided).

Note that makeScopedReducer and useScopedReducer have the same behaviour, but useScopedReducer is a better option in siturations where hooks can be used, as it will return a stable dispatch function and memoises the returned entity (helping to reduce unnecessary re-rendering).

As a convenience, a user-space useEvent hook is also returned, because it is used internally. If you prefer, you can also pass in your own useEvent hook (removes the need for useRef and useLayoutEffect / useEffect).

Example usage of hooks:

const React = require('react');
const context = require('json-immutability-helper');
const { makeHooks } = require('json-immutability-helper/helpers/hooks');

const { useJSONReducer, useScopedReducer } = makeHooks(context, React);

const App = () => {
  const scope = useJSONReducer({ items: [] });

  return <MyList scope={scope} />
};

const MyList = ({ scope }) => {
  const localScope = useScopedReducer(scope, ['items']);
  const add = () => localScope.dispatch(['push', { id: crypto.randomUUID(), label: '' }]);

  return (
    <ul>
      {localScope.state.map((item) => (
        <li key={item.id}>
          <MyItem scope={localScope} id={item.id} />
        </li>
      ))}
      <li><button type="button" onClick={add}>Add</button></li>
    </ul>
  );
};

const MyItem = ({ scope, id }) => {
  const localScope = useScopedReducer(scope, [['id', id]]);

  return (
    <>
      <input
        type="text" value={localScope.state.label}
        onChange={(e) => localScope.dispatch({ label: ['=', e.currentTarget.value] })}
      />
      <button onClick={() => localScope.dispatch(['unset'])}>Remove</button>
    </>
  );
};

immutability json reducer

@infinitebrahmanuniverse/nolb-json-i @everything-registry/sub-chunk-1984

1 year ago

1 year ago

1 year ago

1 year ago

1 year ago