2.1.0 • Published 1 year ago

lifx-lan-client v2.1.0

Weekly downloads
49
License
MIT
Repository
github
Last release
1 year ago

LIFX LAN Node.js Library

NPM Version

A Node.js implementation of the LIFX protocol. Developed to work with a minimum firmware version of 2.0.

This library is not, in any way, affiliated or related to LiFi Labs, Inc.. Use it at your own risk.

Installation

$ npm install lifx-lan-client --save
$ yarn add lifx-lan-client

Compatibility

Node LTS and current versions are tested and supported on Mac, Linux and Windows. Older versions may work but are not supported or tested.

Usage

The file cli.js contains a working example.

Client

The library uses a client for network communication. This client handles communication with all lights in the network.

var LifxClient = require('lifx-lan-client').Client;
var client = new LifxClient();

client.init();

The Client object is an EventEmitter and emmits events whenever any changes occur. This can be a new light discovery, a light sending a message or similar. The client starts discovery of lights right after it is initialized with the init method. If a new light is found the client emmits a light-new event. This event contains the light as an object on which methods can be called then:

var LifxClient = require('lifx-lan-client').Client;
var client = new LifxClient();

client.on('light-new', function(light) {
  // Change light state here
});

client.init();

Changing light state

The states of a light can be changed with different methods:

light.on([duration], [callback])

This turns a light on.

OptionTypeDefaultDescription
durationint0Turning on will be faded over the time (in milliseconds).
callbackfunctionnullfunction(error) {} Called after the command has reached the light or after client.resendMaxTimes with client.resendPacketDelay in case it has not. error is null in case of success and given if the sending has failed.

Note: Using callback multiplies network load for this command by two or more times.

Usage examples:

light.on(); // Turns the light on instantly
light.on(2000); // Fading the light on over two seconds

light.off([duration], [callback])

This turns a light off.

OptionTypeDefaultDescription
durationint0Turning off will be faded over the time (in milliseconds).
callbackfunctionnullfunction(error) {} Called after the command has reached the light or after client.resendMaxTimes with client.resendPacketDelay in case it has not. error is null in case of success and given if the sending has failed.

Note: Using callback multiplies network load for this command by two or more times.

Usage examples:

light.off(); // Turns the light off instantly
light.off(2000); // Fading the light off over two seconds

light.color(hue, saturation, brightness, [kelvin], [duration], [callback])

Changes the color of a light to an HSB color value. This is the preferred method to change the color of a light.

OptionTypeDefaultDescription
hueintBetween 0 and 360, representing the color hue in degree which changes the color.
saturationintBetween 0 and 100, representing the color intensity from 0% to 100%.
brightnessintBetween 0 and 100, representing the light brightness from 0% to 100%.
kelvinint3500Between 2500 and 9000, representing the color temperature.
durationint0Fade the color to the new value over time (in milliseconds).
callbackfunctionnullfunction(error) {} Called after the command has reached the light or after client.resendMaxTimes with client.resendPacketDelay in case it has not. error is null in case of success and given if the sending has failed.

Note: Using callback multiplies network load for this command by two or more times.

Usage examples:

light.color(0, 100, 50); // Set to red at 50% brightness
light.color(50, 50, 80, 3500, 2000); // Set to a light green at 80% brightness over next two seconds

light.colorRgbHex(hexString, [duration], [callback])

Changes the color of a light to an RGB color value given in Hex Format. Note that RGB poorly represents color of light, prefer HSBK values given via the color method.

OptionTypeDefaultDescription
hexStringstringA hex RGB string starting with #
durationint0Fade the color to the new value over time (in milliseconds).
callbackfunctionnullfunction(error) {} Called after the command has reached the light or after client.resendMaxTimes with client.resendPacketDelay in case it has not. error is null in case of success and given if the sending has failed.

Note: Using callback multiplies network load for this command by two or more times.

Usage examples:

light.colorRgbHex('#F00'); // Set to red
light.colorRgbHex('#FFFF00'); // Set to yellow

light.colorRgb(red, green, blue, [duration], [callback])

Changes the color of a light to an RGB color value. Note that RGB poorly represents color of light, prefer HSBK values given via the color method.

OptionTypeDefaultDescription
redintAmout of red in color from 0 to 255
greenintAmout of green in color from 0 to 255
blueintAmout of blue in color from 0 to 255
durationint0Fade the color to the new value over time (in milliseconds).
callbackfunctionnullfunction(error) {} Called after the command has reached the light or after client.resendMaxTimes with client.resendPacketDelay in case it has not. error is null in case of success and given if the sending has failed.

Note: Using callback multiplies network load for this command by two or more times.

Usage examples:

light.colorRgb(255, 0, 0); // Set to red
light.colorRgb(255, 255, 0); // Set to yellow

light.setMultiZoneEffect(effectName, speed, direction, [callback])

Changes a color zone range to the given HSBK value

OptionTypeDefaultDescription
effectNamestringDesired effect, currently available options are: 'MOVE', 'OFF'
speednumberDuration of one cycle of the effect, the higher the value the slower the effect animation
directionstringAnimate from or towards the controller, available options are: 'TOWARDS', 'AWAY'
callbackfunctionnullCalled after command has reached the light

light.maxIR(brightness, callback)

Set's the maximum infrared brightness of the light (only for lights that support infrared light)

OptionTypeDefaultDescription
brightnessintBetween 0 and 100, representing the light brightness from 0% to 100%.
callbackfunctionfunction(error, data) {}

Usage examples:

light.maxIR(0); // Set's a maximum infrared brightness of 0
light.maxIR(25); // Set's a maximum infrared brightness of 25

light.waveform(hue, saturation, brightness, [kelvin], [transient], [period], [cycles], [skewRatio], [waveform], [callback])

Apply a waveform effect to the bulb.

Also see the LIFX waveform docs

OptionTypeDefaultDescription
hueintBetween 0 and 360, representing the color hue in degree which changes the color.
saturationintBetween 0 and 100, representing the color intensity from 0% to 100%.
brightnessintBetween 0 and 100, representing the light brightness from 0% to 100%.
kelvinint3500Between 2500 and 9000, representing the color temperature.
transientbooleanfalseWhether to return to the previous color after the effect.
periodint500Duration of a cycle in miliseconds.
cyclesfloat10e30Number of wave cycles to stop after. Default value is effectively never. Total duration of the effect will be period * cycles.
skewRatiofloat0.5The skew ratio to use for pulse waveforms (percentage of the time the old color is visible per period), between 0 and 1.
waveformint0The waveform to use, between 0 and 4. 0 = SAW, 1 = SINE, 2 = HALF_SINE, 3 = TRIANGLE, 4 = PULSE.
callbackfunctionnullfunction(error) {} Called after the command has reached the light or after client.resendMaxTimes with client.resendPacketDelay in case it has not. error is null in case of success and given if the sending has failed.

Note: Using callback multiplies network load for this command by two or more times.

Usage examples:

light.waveform(0, 100, 50); // Set to a basic red wave at 50% brightness
light.waveform(50, 50, 80, 3500, true, 200, 5); // Set to a light green wave at 80% brightness over next two seconds, which will return to the previous color after five 200ms cycles

light.getMaxIR(callback)

Requests the maximum infrared brightness of the light (only for lights that support infrared light)

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
{
  brightness: 25
}

Requesting light state and info

Infos of the state and spec of the light can be requested with the following methods:

light.getState(callback)

Requests general info from a light, this includes color, label and power state. This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
{
  color: { hue: 120, saturation: 0, brightness: 100, kelvin: 8994 },
  power: 0,
  label: 'Kitchen'
}

light.getPower(callback)

Requests current power state (on or off). This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
0 // off

light.getFirmwareVersion(callback)

Requests the firmware version from a light (minor and major version). This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
{
  majorVersion: 2,
  minorVersion: 1
}

light.getHardwareVersion(callback)

Requests the hardware version from a light (vendor, product and version). This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
{
  vendorId: 1,
  vendorName: 'LIFX',
  productId: 1,
  productName: 'Original 1000',
  version: 6,
  productFeatures: {
    color: true,
    infrared: false,
    multizone: false
  }
}

light.getFirmwareInfo(callback)

Requests info from the micro controller unit of a light (signal, tx and rx). This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
{
  signal: 0,
  tx: 0,
  rx: 0
}

light.getWifiInfo(callback)

Requests wifi info from a light (signal, tx and rx). This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
{
  signal: 0.000009999999747378752,
  tx: 16584,
  rx: 12580
}

light.getWifiVersion(callback)

Requests the wifi firmware version from the light (minor and major version). This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
{
  majorVersion: 2,
  minorVersion: 1
}

light.getAmbientLight(callback)

Requests the ambient light value in flux from the light. This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}

Example result:

null,
10

Switch

The following methods are used to control a Switch device with relays:

light.hasRelays(callback)

Checks to see if the device is a switch with relays. This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(result) {}

Example result:

true

light.getRelayPower(relayIndex, callback)

Gets the value of the relay at zero-based index i (0-3). This function is asynchronous.

OptionTypeDefaultDescription
relayIndexintThe zero-based index of the relay (from 0 to 3)
callbackfunctionfunction(error, level) {}

Example result:

null,
65535

light.relayOn(relayIndex, callback)

Turns the relay on. This function is asynchronous.

OptionTypeDefaultDescription
relayIndexintThe zero-based index of the relay (from 0 to 3)
callbackfunctionfunction(error, data) {}

Example result:

null,
65535

light.relayOff(relayIndex, callback)

Turns the relay off. This function is asynchronous.

OptionTypeDefaultDescription
relayIndexintThe zero-based index of the relay (from 0 to 3)
callbackfunctionfunction(error, data) {}

Example result:

null,
0

Labels

Labels of lights can be requested and set using the following methods:

light.getLabel(callback, [cache])

Requests the label of a light. This function is asynchronous.

OptionTypeDefaultDescription
callbackfunctionfunction(error, data) {}
cachebooleanfalseUse the last known value for the label and and do not request from the light again

Example result:

null,
'Kitchen'

light.setLabel(label, [callback])

Sets a new label for a light.

OptionTypeDefaultDescription
labelstringNew Label with 32 bit size maximum (which is a length of 32 with non unicode chars).
callbackfunctionnullfunction(error) {} Called after the command has reached the light or after client.resendMaxTimes with client.resendPacketDelay in case it has not. error is null in case of success and given if the sending has failed.

Note: Using callback multiplies network load for this command by two or more times.

Usage examples:

light.setLabel('Bedroom Light');
light.setLabel('Kitchen Light 4', function(err) {
  if (err) { throw err; }
  console.log('New light label has been set');
});

Get a light

client.light(identifier)

Find a light in the list off all lights by ip, label or id.

OptionTypeDefaultDescription
identifier stringLight label (case sensitive) client.light('Kitchen'), the ip address client.light('192.168.2.102') or the light id client.light('0123456789012')

Returns a light object that can then be used to call methods on it. For example client.light('192.168.2.102').on().

Get all lights

client.lights([filter])

Get a list of all known lights

OptionTypeDefaultDescription
filter stringnullFilter list of lights to return only active (null or 'on'), inactive ('off') or all ('')

Client events

The following events might be thrown by the client.

light-new

This event is thrown when there is a new light discovery that has not been seen at runtime before. This event is provided with the new light object. client.on('light-new', function(light) {});

light-offline

This event is thrown when a light hasn't been discovered for a time. The light given is no longer expected to be reachable. client.on('light-offline', function(light) {});

light-online

This event is thrown when a light is discovered again after being offline. client.on('light-online', function(light) {});

Start / Stop discovery

The discovery for each client can be started and stopped at runtime using these commands:

client.startDiscovery()

Starts the discovery process.

client.stopDiscovery()

Stops the discovery process.

Client settings

For the initialization of the client different settings can be provided. This is an example with the default options:

var LifxClient = require('lifx-lan-client').Client;
var client = new LifxClient();

// ...

client.init({
  lightOfflineTolerance: 3, // A light is offline if not seen for the given amount of discoveries
  messageHandlerTimeout: 45000, // in ms, if not answer in time an error is provided to get methods
  startDiscovery: true, // start discovery after initialization
  resendPacketDelay: 150, // delay between packages if light did not receive a packet (for setting methods with callback)
  resendMaxTimes: 3, // resend packages x times if light did not receive a packet (for setting methods with callback)
  debug: false, // logs all messages in console if turned on
  address: '0.0.0.0', // the IPv4 address to bind the udp connection to
  broadcast: '255.255.255.255', // set's the IPv4 broadcast address which is addressed to discover bulbs
  lights: [], // Can be used provide a list of known light IPv4 ip addresses if broadcast packets in network are not allowed
              // For example: ['192.168.0.112', '192.168.0.114'], this will then be addressed directly
  stopAfterDiscovery: false, // stops discovery process after discovering all known lights (requires list
                             // of addresses provided with "lights" setting)
  discoveryInterval: 5000, // Interval (in ms) between discovery operations
  messageRateLimit: 50, // The delay (in ms) between sending any two packets to a single light
});