m2d_2lqhd v1.0.0

Bomes Midi Translator Pro 172 15

LINK >> https://urloso.com/2thymK

Except for some system MIDI messages, the STATUS byte contains the MIDI channel number. There are 16 possible MIDI channels, numbered from 0 to 15 in hexadecimal. In practice, musicians and software refer to the MIDI channels by counting them from 1 to 16, so that there is a difference of 1 when you program them in hexadecimal (channel 1 is coded 0, channel 10 is coded 9 and channel 16 is coded F).

Hi, thanks for your Topic. Two questions: Can I put more midicontrollers So 3 or4 I have akay apc mini, akay apc 40 and akay apc 40 mkII... And I don't understand if you do with the trial version or tuo have paid. And last: After you have programming the midi controllers with the bome software, You turn it off and all works good with mydmx or do you have to turn it on with my dmx in your show (sorry I'm italian, I hopeyou can understand

in the second one U sent me (MFT RESOLVE (In wich I can move the cursor with a circolar button left and right in the middle of the davinci screen (without dragging anything) Im commanding the cursor via TouchOSC (in wich I can set any parameters of the midi channels I choose): the log of the channel Im setting is: MIDI IN Rete Sessione 1: B0 01 00 (control change on ch. 1 with CC#:1 (0x01) and value:0 (1-127) )

in the third one U sent me (MFT RESOLVE (In wich I can move the cursor with a circolar button left and right in the middle of the davinci screen (without dragging anything) Im commanding the cursor via TouchOSC (in wich I can set any parameters of the midi channels I choose): the log of the channel Im setting is: MIDI IN Rete Sessione 1: B0 00 00 (control change on ch. 0 with CC#:1 (0x01) and value:1 (0-127) ) 84d34552a1