mdns-scanner v1.2.2
mdns-scanner
A NodeJS module used to scan for multi-cast DNS entries.
The mdns-scanner module provides a scanner and services class. The scanner class listens for raw mDNS packets on IPv4 and/or IPv6 interfaces while providing a query method to send mDNS queries out on the interfaces. The services class is optionally used with a scanner instance to process the raw mDNS packets into collated service details.
Table of Contents
Usage
The scanner and services classes cover two possible use cases. Low level monitoring of mDNS packets on a network and higher level mDNS packet analysis to collate a list of discovered network services.
Low level monitoring
The scanner class is used to setup a packet listener on one or more network interfaces where you need to listen for mDNS packets. The scanner will emit packet events with the raw packet when any mDNS packet is received. Raw mDNS packets can then be processed by an event handler in an application.
High level service discovery
The services class is provided as a means of collating mDNS packets into a coherent list of discovered network services. An instance of the services class takes a scanner instance and listens for the mDNS packets which it then processes into a stored list of discovered network services and details.
Scanner class
The Scanner class is used to listen for multi-cast DNS (mDNS) packets and send mDNS queries over the network to initiate discovery of available services. Create and initialize a Scanner instance to start listening for mDNS packets and use the query() method to send mDNS queries. The Scanner class will emit events to indicate conditions, status, and received mDNS packets.
Example:
// create scanner and set listeners
const { Scanner } = require('mdns-scanner');
let scanner = new Scanner({ debug: true });
scanner
.on('error', error => {
console.log('ERROR EVENT', error.message);
})
.on('warn', message => {
console.log('WARN EVENT', message)
})
.on('debug', message => {
console.log('DEBUG EVENT', message);
})
.on('packet', (packet, rinfo) => {
console.log(
'RECVD PACKET',
`from ${rinfo.address}`,
`type: ${packet.type}, questions: ${packet.questions ? packet.questions.length : 'none'}, answers: ${packet.answers ? packet.answers.length : 'none'}`,
`[${packet.answers ? packet.answers.map(a => a.data).join(', ') : ''}]`
);
});
// initialize scanner and send a query
scanner.init()
.then(ready => {
if (!ready) throw new Error('Scanner not ready after init.');
scanner.query('_services._dns-sd._udp.local', 'ANY');
})
.catch((error) => {
console.log('CAUGHT ERROR', error.message);
process.exit(1);
});
Scanner events
A scanner instance will emit events to communicate scanner condition, status, and received packets.
error
The error event is emitted when an error occurs during initialization or operation of the Scanner class. The event payload is an error message.
warn
A warn event is emitted when a failure occurs that will not stop the Scanner from operating. The payload for the warn event is a message with a reason for the warning.
debug
When debug is enabled the debug events will be emitted during initialization and operation to provide greater detail for diagnostics.
packet
The packet event is emitted whenever an mDNS packet is received by the Scanner. The payload includes two arguments, the raw packet object and an rinfo object with details about the receiving interface.
NOTE: The Services class can be used to consume the packet events from a Scanner instance to produce service details.
Scanner methods
constructor(config)
The constructor accepts a configuration object with parameters used to setup the Scanner instance.
let scanner = new Scanner({
reuseAddr: true,
srcPort: 0,
interfaces: null,
ttl: 255,
loopback: true,
debug: false
});
reuseAddr
Reuse address when socket binds even if another socket is bound to the address. Default: true
srcPort
Specify the port number to use for the socket that will send mDNS packets. In some cases a device may only respond to mDNS query packets that originate from the standard mDNS port 5353.
When the value for the srcPort is 0 then the operating system will assign a currently available port number. Default: 0
ttl
Number of IP hops allowed for multi-cast packets. Default: 255
loopback
Sets whether local multi-cast packets will be received on the local interface. Default: true
interfaces
The interfaces to use in the scanner. If not set then the Scanner will use all usable interfaces. To specify interfaces use a string, or an array of strings, with the interface address or name.
debug
Enable debug messages.
on(event, handler)
Use the on(event, handler) method to attach listeners to the Scanner events.
async init()
Before a Scanner can be used it must be initialized, the asynchronous init() method will prepare the Scanner for operation. When the init() method resolves it will return the ready status of the Scanner.
// initialize scanner and send a query
scanner.init()
.then(ready => {
if (!ready) throw new Error('Scanner not ready after init.');
scanner.query('_services._dns-sd._udp.local', 'ANY');
})
.catch((error) => {
console.log('CAUGHT ERROR', error.message);
process.exit(1);
});
query(questions, qtype)
After initialization use the query(questions, qtype) method to send mDNS query packets over the network.
The questions argument can be a single query question string with qtype optionally specifying the question type. Or questions can be an array of formatted query questions and types.
destroy()
When finished with a Scanner the destroy() method is called to close all sockets
Services class
The services class is used to collate mDNS responses into meaningful service data. This includes automatically injecting additional query packets to discover complete details about advertised services.
Example:
const { Scanner, Services } = require('mdns-scanner');
let scanner = new Scanner({ debug: true });
let services = new Services(scanner);
// services event listeners
services
.on('error', error => {
console.log('ERROR EVENT', error.message);
})
.on('warn', message => {
console.log('WARN EVENT', message)
})
.on('debug', message => {
console.log('DEBUG EVENT', message);
})
.on('query', message => {
console.log('QUERY EVENT', message.questions)
})
.on('discovered', message => {
console.log('DISCOVERED EVENT', message);
});
// initialize scanner and send a query
scanner.init()
.then(ready => {
if (!ready) throw new Error('Scanner not ready after init.');
// send a query
scanner.query('_services._dns-sd._udp.local', 'ANY');
})
.catch((error) => {
console.log('CAUGHT ERROR', error.message);
process.exit(1);
});
// end scan after delay
setTimeout(() => {
let types = services.types.slice();
types.sort();
console.log('Discovered types:', types);
Object.keys(services.namedServices).forEach(name => {
console.log(`Service: ${name} from ${services.namedServices[name].rinfo.address}.`);
if(services.namedServices[name].service) console.log('Data:', services.namedServices[name].service.data);
});
scanner.destroy();
process.exit(0);
}, 15000);
Services events
The Services class forwards the error, warn, and debug events from the associated Scanner class making it possible to use event listeners on only the Services class in place of listeners on both classs. The Services class adds a discovered and query event to note when a service is discovered and to inform when a query is received.
error
The error event is emitted when an error occurs within the associated Scanner instance or within the Services instance. The event payload is an error message.
warn
A warn event is emitted when a failure occurs that will not stop the Scanner or Services instance from operating. The payload for the warn event is a message with a reason for the warning.
debug
When debug is enabled the debug events will be emitted during operation. If debug is also enabled in the Scanner class then Scanner debug events will also be emitted from the Services class as long as debug is enabled.
discovered
A discovered event is emitted when new service details are discovered. The payload from the event is an object with a type field that specifies the type of discovery and a data field that contains data from the discovery.
discovery types
Discovery of a service may span multiple packets which results in different discovered event types based on the detail that is discovered.
discovery type type
The type discovery type occurs when a new service type is discovered. At this point there may not be any detail about where and how the service is detailed, only the type of service is discovered at this point.
Example:
{
"type": "type",
"data": "_smb._tcp.local"
}
discovery type service
The service type occurs when the details about where and how a service is hosted is discovered.
Example:
{
"type": "service",
"data": {
"name": "Brother HL-2070N series",
"rinfo": {
"address": "192.168.8.168",
"family": "IPv4",
"port": 5353,
"size": 122
},
"service": {
"name": "Brother HL-2070N series._http._tcp.local",
"type": "SRV",
"ttl": 60,
"class": "IN",
"flush": true,
"data": {
"priority": 0,
"weight": 0,
"port": 80,
"target": "brother.local"
}
},
"host": "brother.local",
"port": 80,
"addresses": [
{
"family": "IPv4",
"address": "192.168.8.168"
}
]
}
}
Services methods
constructor(scanner, config)
The constructor for Services accepts a Scanner instance and a configuration object.
let scanner = new Scanner();
let Services = new Services(scanner, { debug: true });
on(event, handler)
Use the on(event, handler) method to attach listeners to the Scanner events.
reset()
The reset() method is used to clear out the list of discovered services in preparation for a new scan. This will clear out the types and namedServices properties.
Services properties
While an event handler can be used to collect details about the discovered services, the Services instance will use public properties to keep track of the discovered services.
types
The types Services property is an array of service type strings. This array is updated as services types are discovered.
Example:
[
"_http._tcp.local",
"_nvstream_dbd._tcp.local",
"_qdiscover._tcp.local",
"_qmobile._tcp.local",
"_smb._tcp.local",
"_touch-able._tcp.local",
"_workstation._tcp.local"
]
namedServices
When the details about an available service are discovered they are added to the namedServices object where each service entry is keyed by the full service name.
Example:
{
"SONY XBR-65A8H._androidtvremote2._tcp.local": {
"name": "SONY XBR-65A8H",
"rinfo": {
"address": "fe80::9e5a:25c4:83f3:c3a6%enp6s0",
"family": "IPv6",
"port": 5353,
"size": 107
},
"service": {
"name": "SONY XBR-65A8H._androidtvremote2._tcp.local",
"type": "SRV",
"ttl": 10,
"class": "IN",
"flush": false,
"data": {
"priority": 0,
"weight": 0,
"port": 6466,
"target": "Android.local"
}
},
"host": "Android.local",
"port": 6466,
"addresses": [
{
"family": "IPv4",
"address": "192.168.8.143"
},
{
"family": "IPv6",
"address": "fe80::9e5a:25c4:83f3:c3a6"
}
]
},
"SONY XBR-65A8H._airplay._tcp.local": {
"name": "SONY XBR-65A8H",
"rinfo": {
"address": "fe80::9e5a:25c4:83f3:c3a6%enp6s0",
"family": "IPv6",
"port": 5353,
"size": 107
},
"service": {
"name": "SONY XBR-65A8H._airplay._tcp.local",
"type": "SRV",
"ttl": 10,
"class": "IN",
"flush": false,
"data": {
"priority": 0,
"weight": 0,
"port": 7000,
"target": "Android.local"
}
},
"host": "Android.local",
"port": 7000,
"txt": {
"strings": [
""
],
"keyValuePairs": {}
},
"addresses": [
{
"family": "IPv4",
"address": "192.168.8.143"
},
{
"family": "IPv6",
"address": "fe80::9e5a:25c4:83f3:c3a6"
}
]
},
"BRAVIA-4K-UR3-8d327bada35505310c8435e50214d3f3._googlecast._tcp.local": {
"name": "BRAVIA-4K-UR3-8d327bada35505310c8435e50214d3f3",
"rinfo": {
"address": "192.168.8.143",
"family": "IPv4",
"port": 5353,
"size": 362,
"interface": "enp6s0"
},
"service": {
"name": "BRAVIA-4K-UR3-8d327bada35505310c8435e50214d3f3._googlecast._tcp.local",
"type": "SRV",
"ttl": 120,
"class": "IN",
"flush": false,
"data": {
"priority": 0,
"weight": 0,
"port": 8009,
"target": "8d327bad-a355-0531-0c84-35e50214d3f3.local"
}
},
"host": "8d327bad-a355-0531-0c84-35e50214d3f3.local",
"port": 8009,
"txt": {
"strings": [
""
],
"keyValuePairs": {}
},
"addresses": [
{
"family": "IPv4",
"address": "192.168.8.143"
}
]
},
"RPINAS._smb._tcp.local": {
"service": {
"name": "RPINAS._smb._tcp.local",
"type": "SRV",
"ttl": 10,
"class": "IN",
"flush": false,
"data": {
"priority": 0,
"weight": 0,
"port": 445,
"target": "rpinas.local"
}
},
"host": "rpinas.local",
"port": 445,
"addresses": [
{
"family": "IPv4",
"address": "192.168.8.3"
},
{
"family": "IPv6",
"address": "fe80::c699:96f5:886:c510"
}
],
"name": "RPINAS",
"rinfo": {
"address": "fe80::c699:96f5:886:c510%enp6s0",
"family": "IPv6",
"port": 5353,
"size": 122,
"interface": "enp6s0"
}
}
}
Additional Notes
Interface Family
Beginning in NodeJS version 18 the value of network interface family properties will change from a string to an integer, i.e. "IPv4" will become 4.
The scanner and services classes are compatible with the family format changes in NodeJS version 18. However, the family values provided in the discovered service entries by the services class will continue to use the string family representation for the interface.
This will result in a mix of family values in discovered services as some information comes from NodeJS while other details are parsed from the mDNS packet.
I.E. The rinfo property in a discovered service is provided by NodeJS and will use the NodeJS family format, while the service property parsed from the mDNS packet will use the string family format.
Note the service object below has an rinfo family of 4 while the addresses property has an address with family of "IPv4".
{
"name": "Brother HL-2070N series",
"rinfo": { "address": "192.168.8.168", "family": 4, "port": 5353, "size": 122 },
"service": {
"name": "Brother HL-2070N series._http._tcp.local",
"type": "SRV",
"ttl": 60,
"class": "IN",
"flush": true,
"data": { "priority": 0, "weight": 0, "port": 80, "target": "brother.local" }
},
"host": "brother.local",
"port": 80,
"addresses": [ { "family": "IPv4", "address": "192.168.8.168" } ]
}