ndrive_11_para_windows_ce_6_8xbom v1.0.0

Ndrive 11 Download Para Windows Ce 6

LINK --->>> https://urluss.com/2tjH4e

product activation for the first time:  you will need to set up your image printer in order to use the new software. download the software to the computer. insert the memory card into the card reader and the device screen shows the welcome. tap the power button to turn on the device. confirm the operating system, name and application version. tap the lock icon to authenticate the system. insert the memory card into the card reader and the device screen shows the new software. tap the power button to start the software and the screen will show the default home screen. 


i have no power and i get the following error message. bluetooth or gps?: if you are using a device that has bluetooth, you should check that your device is turned on and then if necessary, turn on the bluetooth on the device (bluetooth icon in the status bar) so that you can try again.


if you are using an android device, you must ensure that the device is connected to the same network as the computer. you can check this by entering the ip address of the computer into the smartphone browser. if the ip address is displayed, the information can be displayed directly on the screen.


usually, there is a delay of 5 to 20 seconds from the time the configuration and map information are transmitted to the time when the initial route begins to be calculated. in the case of no map or map location is not received, the route will not be calculated for the location you entered. thereafter, the latitude and longitude coordinates will be displayed. however, the route is not calculated, and only the coordinate values are displayed. to begin to calculate the route, you must enable the gps function. 84d34552a1