Node-red-contrib-myhome-bticino NPM

node-red-contrib-myhome-bticino

Control Bticino MyHome™ components from NodeRED.

Intro

node-red-contrib-myhome-bticino is a Node-RED nodes pack to interact with Bticino MyHome™ devices with OpenWebNet protocol through a supported gateway (in my case I use unexpensive MH201 Gateway). Based on unpublished (into NPM repository, but it's on GitHub) work of Ralph Vigne: https://github.com/vigne/node-red-bticino-myhome

Bug & Fix

On november 2020 I developed the password (and no password) management (versions > 0.2.1)

Nodes that are now working

Switches -- ON/OFF
Covers -- UP/DOWN/STOP
Event Session -- Listen for any message on the bus and sends it as payload
Command Session -- Send arbitray message provided in payload to bus. E.g. *1*1*16## to turn on light 16

Node not tested but probably it works (test it!)

Lights -- ON/OFF
- Dimming (providing a fixed percentage)

Improvement and changes from original sources

Gateway's password management that is usually set to 12345
Two outputs on node 1. default 'payload' output with 'ON' / 'OFF' value 2. boolean 'payload.On' output to manage the state in homekit-bridge node

Installation & Usage

Easy Install

If you have Node-RED already installed the recommended install method is to use the editor. To do this, select Manage Pallette from the Node-RED menu (top right), and then select install tab in the pallette. Search for and install this node (node-red-contrib-myhome-bticino).

Using NPM

If you have not yet installed Node-RED then run following command or go to Node-RED Installation Guide.

    npm install -g --unsafe-perm node-red

Next, to install node-red-contrib-myhome-biticino node run the following command in your Node-RED user directory - typically ~/.node-red

    npm install node-red-contrib-myhome-bticino

Usage

First touch

In order to easy starting to test the nodes copy this flow in Node-RED selecting Import in the menu.

[{"id":"ab97f24d.b82ae","type":"inject","z":"e389524d.5c9b","name":"","topic":"cmd/switch","payload":"ON","payloadType":"str","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":180,"y":100,"wires":[["eb9f8904.d99788"]]},{"id":"c26ad40e.e21b48","type":"inject","z":"e389524d.5c9b","name":"","topic":"cmd/switch","payload":"OFF","payloadType":"str","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":180,"y":140,"wires":[["eb9f8904.d99788"]]},{"id":"eb9f8904.d99788","type":"myhome-switch","z":"e389524d.5c9b","switchid":"16","topic":"switch","gateway":"85cc3f4e.d14b8","name":"LightTest","x":400,"y":120,"wires":[["548fd2fb.a0a68c"],[]]},{"id":"548fd2fb.a0a68c","type":"debug","z":"e389524d.5c9b","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"false","x":630,"y":80,"wires":[]},{"id":"85cc3f4e.d14b8","type":"myhome-gateway","z":"","name":"MH201","host":"192.168.1.44","port":"20000","pass":"12345","timeout":"60"}]

After that you have to change the IP address in the Gateway configuration and of course the light number in switch node.

Usage of Switch Node

Put Switch node on your flow and set the switch number inside it. Configure your Gateway if not configured yet. Test the Switch injecting payload string message 'ON' (or 'OFF') and setting Topic property as 'cmd/topic' where topic is the Switch Topic.

Tips

How to discover device

Put myhome-eventsession Node connect to a Debug Node on your flow
Deploy the project and open Debug messages window
Click on the switch that you want to know the number
Watch at debug window to see the right message generated

Remeber that the message will be as *1*1*xx## if on or *1*0*xx## if off, where xx is the number of the switch you are trying to discover

Bticino Gateway & OpenWebNet

Bicino is using a proprietary protocol (SCS) to comunicate from/to the devices in MyHome network system. There are a many gateways able to convert SCS protocol to OpenWebNet protocol that is well documented (follow this link for more details) and quit easy to use. I suggest to buy MH201 Gateway that is for hotel room management and it's cheap.