serialmessages v0.0.3

• MessageHandler
  • Installation
  • Usage
    • example.js
      • output
  • Contributing
  • History
  • License

SerialMessages

SerialMessages is a module that sits between node and a serial port in order to asynchronously and synchronously respond to messages over UART

Installation

Type the following into your commandline if you have npm installed

npm install serialmessages

Usage

This is how you instantiate up the serial message handler

var messageHandler = require("serialmessages")("/dev/tty.usbserial-FTE6C8SO");
messageHandler.serialPort.on("data", function(){});
var Q = require("q"); // (optional) for synchronous messages

To create message handlers:

// Add message with ID 0x61 (ASCII 'a'). 
var testHandler = messageHandler.addHandler({
  id:       0x61,
  name:     "'a' handler", 
  length:   4, 
});

var testHandler2 = messageHandler.addHandler({
  id:       0x62,
  name:     "'b' handler", 
  length:   5, 
});

To perform asynchronous handling:

testHandler1.on("message", function(event) {
    console.log("Received message 'a' asynchronously with payload "+event.data);    
});
testHandler2.on("message", function(event) {
    console.log("Received message 'b' asynchronously with payload "+event.data);    
});

To perform synchronous handling:

Q.when(messageHandler.open())
.then(testHandler.receive())
.then(function(event) {
    console.log("Received handler a synchronously: "+event.data);
})
.catch(function(error) {
    console.log("ERROR! "+error);
})
.finally(function() {
    console.log("Done.");
});

example.js

Here is a larger example, with simultaneous asynchronous/synchronous handlers:

#!/usr/bin/env node
"use strict";
var Q = require("q");

// Open a new message handler
var serialIdentifier = process.argv[2] || "/dev/tty.usbserial-A7027DGF";
var messageHandler = require("serialmessages")(serialIdentifier);

// echo all received characters back to command line
messageHandler.serialPort.on("data", echo(messageHandler.serialPort));

// Add message with ID 0x61 (ASCII 'a'). 
var testHandler = messageHandler.addHandler({
  id:       ascii('a'),
  name:     "'a' handler", 
  length:   4, 
}).on("message", logMessageHandler).on("message", sendNewLine);

// Add message with ID 0x62 (ASCII 'b')
var testHandler2 = messageHandler.addHandler({
  id:       ascii('b'), 
  name:     "'b' handler",
  length:   5, 
}).on("message", logMessageHandler).on("message", sendNewLine);

// Add message with ID 0x65 (ascii 'e')
var testHandler3 = messageHandler.addHandler({
  id:       ascii('e'), 
  name:     "exit handler",
  length:   3, 
}).on("message", sendNewLine);

// Add to message handler, if the payload is "xit", then send a newline, then
// exit the program.
testHandler3.on("message", function(event) {
  if (event.data.toString() === "xit") {
    Q.fcall(messageHandler.sendMessage("Exiting...\r\n"))
    .delay(10)
    .then(process.exit);

  }
});




//Example sequence of events:
//1. ensure message handler is open
//2. send "test" message
//3. report how many characters were sent 
//4. receive 'a' message
//5. console log a message back to user
//6. receive 'b' message.
//7. console log b message back to user
//8. log "finished"

Q.when(messageHandler.open())                                                //1
  .then(messageHandler.sendMessage("test\r\n"))                              //2
  .then(function handleSentMessage(messageLength) {                          //3
    console.log("sent message which was "+messageLength+" characters long.");
  })
  .then(testHandler.receive())                                               //4
  .then(function handleFirstMessage(event) {                                 //5
    console.log("Finally received expected message 1: "+event.data);               
  })
  .then(testHandler2.receive())                                              //6
  .then(function handleSecondMessage(event) {                                //7
    console.log("Finally received expected message 2: "+event.data);            
  })  
  .finally(function logFinished() {                                          //8
    console.log("Finished!");
  })
  .catch(function(error){console.log(error);});


/*************************** Misc. Functions Below ***************************/

/**
 * Log received messages to command line, and notify user via bell.
 * @param  {Buffer} event Event received over serial
 */
function logMessageHandler(event) {
  console.log("(" + event.messageHandler.name + ": " + event.data + ")\u0007");
}

/**
 * Used to echo received data back over serial.
 * @param  {Buffer} serialPort SerialPort to echo to
 */
function echo(serialPort) {
  /**
   * Echo to serial port
   * @param  {Buffer} data Data to send over port
   */
  return function echoToPort(data) {
    var i;
    for (i = 0; i < data.length; i += 1) {
      var char = data[i];
      if (char === "\r".charCodeAt(0)) {
        serialPort.write("\r\n", function(){});
      } else if (char === 0x7f) {
        serialPort.write("\b \b", function(){});
      } else {
        serialPort.write(String.fromCharCode(char),function(){});
      }
    }
  };
}
/**
 * Send New Line
 * Sends a line break over serial, for debugging purposes
 * @return {Promise} Promise to send new newline character
 */
function sendNewLine() {
  return Q.fcall(messageHandler.sendMessage("\r\n")); 
}

function ascii (char){
  return char.charCodeAt(0);
}

####Example Output

Contributing

1. Fork it!
2. Create your feature branch: git checkout -b my-new-feature
3. Commit your changes: git commit -am 'Add some feature'
4. Push to the branch: git push origin my-new-feature
5. Submit a pull request :D

History

0.0.1 - Added

License

Licensed by WTFPL