2.0.1 • Published 3 years ago

soma-ctrl v2.0.1

Weekly downloads
42
License
MIT
Repository
github
Last release
3 years ago

SOMA Blind Controller Util npm version

Util for controlling SOMA smart shade, either over MQTT or via a HTTP API

Requirements

  • SOMA smart shade device that has been configured with the SOMA app
  • Bluetooth 4.0 LE hardware
  • OS supported by noble (I've only tested on macOS and Raspbian)
  • Node 8.16.1 or higher (Tested on Node 12.10.0, 11.15.0, 10.15.2, 9.11.2, 8.16.1)
  • (Potentially a Bluetooth stick to itself, if you're using some other Bluetooth software, see #59)

Installation

Run npm install -g soma-ctrl

Usage

somactrl by itself will print usage information

By default, device scanning will be active for 30 seconds, and any supported ones will be connected to. You may optionally:

  • Alter the device scanning timeout, e.g. scan for 60 seconds: somactrl -t 60
  • Specify the number of devices you expect to connect to, e.g. 4 devices expected: somactrl -e 4
  • Manually specify a list of device IDs to connect to, e.g. connect to RISE108 and RISE117: somactrl RISE108 RISE117
  • Manually specify a list of MAC addresses to connect to, e.g.: somactrl f5:11:7b:ee:f3:43

You must then specify options to use either MQTT, HTTP or both

To use with HTTP

Specify a port for the API to listen on with -l: somactrl -l 3000

To use with MQTT

Specify a broker URL with --url option: somactrl --url mqtt://yourbroker (mqtt/mqtts/ws/wss accepted)

Username and password for MQTT may be specified with -u and -p option

If no password argument is supplied, you can enter it interactively

Base topic defaults to homeassistant, but may be configured with the -topic option

MQTT

For each device connected, data will be published to the following topics: <baseTopic>/cover/<deviceID>/position - position

<baseTopic>/cover/<deviceID>/connected - connected or disconnected

<baseTopic>/cover/<deviceID>/battery - battery level

To issue commands: Move: <baseTopic>/cover/<deviceID>/move - message: int position between 0 (closed) and 100 (open)

Stop: <baseTopic>/cover/<deviceID>/move - message: 'stop'

Identify (beep device): <baseTopic>/cover/<deviceID/identify - message is ignored

In addition, for use with Home Assistant MQTT Discovery:

To automatically setup the cover device: <baseTopic>/cover/<deviceID>/config will be set to, e.g.:

{
    "name": "Living Room1",
    "availability_topic": "homeassistant/cover/RISE148/connection",
    "payload_available": "connected",
    "payload_not_available": "disconnected",
    "position_topic": "homeassistant/cover/RISE148/position",
    "set_position_topic": "homeassistant/cover/RISE148/move",
    "command_topic": "homeassistant/cover/RISE148/move",
    "payload_open": 100,
    "payload_close": 0,
    "unique_id": "soma_RISE148_cover",
    "device": {
        "identifiers": "soma_RISE148",
        "name": "RISE148",
        "manufacturer": "Soma",
        "model": "Smart Shade"
    }
}

To automatically setup a battery sensor: <baseTopic>/sensor/cover_<deviceName|slugified>_battery/config will be set to, e.g.:

{
    "name": "Cover <deviceID> battery",
    "state_topic": "<baseTopic>/cover/<deviceID>/battery",
    "unit_of_measurement": "%",
    "device_class": "battery",
    "unique_id": "soma_<deviceID>_battery",
    "device": {
        "identifiers": "soma_RISE148",
        "name": "RISE148",
        "manufacturer": "Soma",
        "model": "Smart Shade"
    }
}

Parameters

<deviceID> has format RISEnnn or the device's MAC address in lowercase, with the colon's stripped out and cannot be changed

<deviceName|slugified> will be the device name (as configured in the app) with spaces replaced by underscores

HTTP Endpoints

GET /: list devices. Response type: [String : Device] - ID as String key, Device as value

{
    "RISE148": {
        "id": "RISE148",
        "battery": 29,
        "batteryLevelLastChanged": "2018-05-03T17:14:10.590Z",
        "position": 0,
        "positionLastChanged": "2018-05-03T17:14:10.320Z",
        "connectionState": "connected",
        "state": "closed",
        "group": "Living Room",
        "name": "Living Room1"
    },
    "RISE236": {
        "id": "RISE236",
        "battery": 28,
        "batteryLevelLastChanged": "2018-05-03T17:14:10.497Z",
        "position": 0,
        "positionLastChanged": "2018-05-03T17:14:10.198Z",
        "connectionState": "connected",
        "state": "closed",
        "group": "Living Room",
        "name": "Living Room2"
    }
}

GET /<deviceID>: Get individual device data (or 404 if no device by that ID).

Response type: Device example:

{
    "id": "RISE148",
    "battery": 29,
    "batteryLevelLastChanged": "2018-05-03T17:14:10.590Z",
    "position": 0,
    "positionLastChanged": "2018-05-03T17:14:10.320Z",
    "connectionState": "connected",
    "state": "closed",
    "group": "Living Room",
    "name": "Living Room1"
}

POST /<deviceID>/identify: Ask deviceID to identify itself (beep). Response type: 200 - OK or 404 - Not Found

POST /<deviceID>/move?position=<position>: Ask deviceID to move to <position>. Response type: Device or 404

POST /<deviceID>/stop: Ask deviceID to stop moving. Response type: 200 - OK or 404 - Not Found

POST /<deviceID>/calibrateModeStart: Enable calibrate mode on deviceID. Response type: 200 - OK or 404 - Not Found

POST /<deviceID>/moveUp: Request device to move up. Beware that if calibration mode is enabled, the defined top position is not honoured. Response type: 200 - OK or 404 - Not Found

POST /<deviceID>/stop: Request device to stop moving. Response type: 200 - OK or 404 - Not Found

POST /<deviceID>/moveDown: Request device to move down. Beware that if calibration mode is enabled, the defined bottom position is not honoured. Response type: 200 - OK or 404 - Not Found

POST /<deviceID>/calibrateTop: When in calibrate mode, set the current position as the top-most position. Response Type: 200 - OK or 404 - Not Found

POST /<deviceID>/calibrateBottom: When in calibrate mode, set the current position as the bottom-most position. Response Type: 200 - OK or 404 - Not Found

POST /<deviceID>/calibrateModeStop: Disable calibrate mode on deviceID. Response type; 200 - OK or 404 - Not Found

POST /exit: Quit somactrl (useful if you run with systemd and want to restart). Response type: 200 - OK

Parameters

<deviceID> has format RISEnnn or the device's MAC address in lowercase, with the colon's stripped out and cannot be changed

<position> should be an integer between 0 (closed) and 100 (open)

2.0.1

3 years ago

2.0.0

4 years ago

1.4.2

5 years ago

1.4.1

5 years ago

1.4.0

5 years ago

1.3.1

5 years ago

1.3.0

5 years ago

1.2.0

5 years ago

1.1.1

5 years ago

1.1.0

5 years ago

1.0.4

6 years ago

1.0.3

6 years ago

1.0.2

6 years ago

1.0.1

6 years ago

1.0.0

6 years ago