umpc-preload-webpack-plugin v2.2.0
preload-webpack-plugin
A Webpack plugin for automatically wiring up asynchronous (and other types) of JavaScript
chunks using <link rel='preload'>
. This helps with lazy-loading.
Note: This is an extension plugin for html-webpack-plugin - a plugin that simplifies the creation of HTML files to serve your webpack bundles.
This plugin is a stop-gap until we add support for asynchronous chunk wiring to script-ext-html-webpack-plugin.
Introduction
Preload is a web standard aimed at improving performance and granular loading of resources. It is a declarative fetch that can tell a browser to start fetching a source because a developer knows the resource will be needed soon. Preload: What is it good for? is a recommended read if you haven't used the feature before.
In simple web apps, it's straight-forward to specify static paths to scripts you would like to preload - especially if their names or locations are unlikely to change. In more complex apps, JavaScript can be split into "chunks" (that represent routes or components) at with dynamic names. These names can include hashes, numbers and other properties that can change with each build.
For example, chunk.31132ae6680e598f8879.js
.
To make it easier to wire up async chunks for lazy-loading, this plugin offers a drop-in way to wire them up
using <link rel='preload'>
.
Pre-requisites
This module requires Webpack 2.2.0 and above. It also requires that you're using html-webpack-plugin in your Webpack project.
Installation
First, install the package as a dependency in your package.json:
$ npm install --save-dev preload-webpack-plugin
Alternatively, using yarn:
yarn add -D preload-webpack-plugin
Usage
Next, in your Webpack config, require()
the preload plugin as follows:
const PreloadWebpackPlugin = require('preload-webpack-plugin');
and finally, configure the plugin in your Webpack plugins
array after HtmlWebpackPlugin
:
plugins: [
new HtmlWebpackPlugin(),
new PreloadWebpackPlugin()
]
When preloading files, the plugin will use different as
attribute depends on the type of each
file. For each file ends with .css
, the plugin will preload it with as=style
, for each file ends
with .woff2
, the plugin will preload it with as=font
, while for all other files, as=script
will be used.
If you do not prefer to determine as
attribute depends on suffix of filename, you can also
explicitly name it using as
:
plugins: [
new HtmlWebpackPlugin(),
new PreloadWebpackPlugin({
rel: 'preload',
as: 'script'
})
]
In case you need more fine-grained control of the as
atribute, you could also provide a function here.
When using it, entry name will be provided as the parameter, and function itself should return a
string for as
attribute:
plugins: [
new HtmlWebpackPlugin(),
new PreloadWebpackPlugin({
rel: 'preload',
as(entry) {
if (/\.css$/.test(entry)) return 'style';
if (/\.woff$/.test(entry)) return 'font';
if (/\.png$/.test(entry)) return 'image';
return 'script';
}
})
]
Notice that if as=font
is used in preload, crossorigin will be added, otherwise the font resource
might be double fetched. Explains can be found in this article.
By default, the plugin will assume async script chunks will be preloaded. This is the equivalent of:
plugins: [
new HtmlWebpackPlugin(),
new PreloadWebpackPlugin({
rel: 'preload',
include: 'asyncChunks'
})
]
For a project generating two async scripts with dynamically generated names, such as
chunk.31132ae6680e598f8879.js
and chunk.d15e7fdfc91b34bb78c4.js
, the following preloads
will be injected into the document <head>
:
<link rel="preload" as="script" href="chunk.31132ae6680e598f8879.js">
<link rel="preload" as="script" href="chunk.d15e7fdfc91b34bb78c4.js">
You can also configure the plugin to preload all chunks (vendor, async, normal chunks) using include: 'all'
, or only preload initial chunks with include: 'initial'
:
plugins: [
new HtmlWebpackPlugin(),
new PreloadWebpackPlugin({
rel: 'preload',
include: 'all' // or 'initial'
})
]
In case you work with named chunks, you can explicitly specify which ones to include
by passing an array:
plugins: [
new HtmlWebpackPlugin(),
new PreloadWebpackPlugin({
rel: 'preload',
include: ['home']
})
]
will inject just this:
<link rel="preload" as="script" href="home.31132ae6680e598f8879.js">
It is very common in Webpack to use loaders such as file-loader
to generate assets for specific
types, such as fonts or images. If you wish to preload these files as well, you can use include
with value all-assets
:
plugins: [
new HtmlWebpackPlugin(),
new PreloadWebpackPlugin({
rel: 'preload',
include: 'all-assets',
})
]
Usually you don't want to preload all of them but only keep the necessary resources, you can use
fileBlacklist
or fileWhitelist
shown below to filter.
Filtering chunks
There may be chunks that you don't want to have preloaded (sourcemaps, for example). Before preloading each chunk, this plugin checks that the file does not match any regex in the fileBlacklist
option. The default value of this blacklist is [/\.map/]
, meaning no sourcemaps will be preloaded. You can easily override this:
new PreloadWebpackPlugin({
fileBlacklist: [/\.whatever/]
})
Passing your own array will override the default, so if you want to continue filtering sourcemaps along with your own custom settings, you'll need to include the regex for sourcemaps:
new PreloadWebpackPlugin({
fileBlacklist: [/\.map/, /\.whatever/]
})
If you use include="all-assets"
, you might find excluding all unnecessary files one by one a
bit annoying. In this case, you can use fileWhitelist
to only include the files you want:
new PreloadWebpackPlugin({
fileWhitelist: [/\.files/, /\.to/, /\.include/],
})
notice that if fileWhitelist
is not provided, it will not filter any file out.
Also, you could use fileWhitelist
and fileBlacklist
together:
new PreloadWebpackPlugin({
fileWhitelist: [/\.files/, /\.to/, /\.include/],
fileBlacklist: [/\.files/, /\.to/, /\.exclude/],
})
In example above, only files with name matches /\.include/
will be included.
Resource Hints
Should you wish to use Resource Hints (such as prefetch
) instead of preload
, this plugin also supports wiring those up.
Prefetch:
plugins: [
new HtmlWebpackPlugin(),
new PreloadWebpackPlugin({
rel: 'prefetch'
})
]
For the async chunks mentioned earlier, the plugin would update your HTML to the following:
<link rel="prefetch" href="chunk.31132ae6680e598f8879.js">
<link rel="prefetch" href="chunk.d15e7fdfc91b34bb78c4.js">
Demo
A demo application implementing the PRPL pattern with React that uses this plugin can be found in the demo
directory.
Support
If you've found an error in this sample, please file an issue: https://github.com/googlechrome/preload-webpack-plugin/issues
Patches are encouraged, and may be submitted by forking this project and submitting a pull request through GitHub.
Contributing workflow
index.js
contains the primary source for the plugin, test
contains tests and demo
contains demo code.
Test the plugin:
$ npm install
$ npm run test
Lint the plugin:
$ npm run lint
$ npm run lint-fix # fix linting issues
The project is written in ES2015, but does not use a build-step. This may change depending on any Node version support requests posted to the issue tracker.
Additional Notes
- Be careful not to
preload
resources a user is unlikely to need. This can waste their bandwidth. - Use
preload
for the current session if you think a user is likely to visit the next page. There is no 100% guarantee preloaded items will end up in the HTTP Cache and read locally beyond this session. - If optimising for future sessions, use
prefetch
andpreconnect
. Prefetched resources are maintained in the HTTP Cache for at least 5 minutes (in Chrome) regardless of the resource's cachability.
Related plugins
- script-ext-html-webpack-plugin - Enhances html-webpack-plugin with options including 'async', 'defer', 'module' and preload (no async chunk support yet)
- resource-hints-webpack-plugin - Automatically wires resource hints for your resources (similarly no async chunk support)
License
Copyright 2017 Google, Inc.
Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
7 years ago