Uproxy-networking NPM

uproxy-networking

Overview

uProxy's networking library provides a "split SOCKS5 proxy" whose two halves communicate with one another via WebRTC data channels, optionally disguised as some other protocol.

There are two main components: socks-to-rtc and rtc-to-net.

socks-to-rtc provides a local proxy (which the user can point their browser or command-line tools at) which passes requests over a WebRTC peerconnection.
rtc-to-net acts as the "remote proxy" which receives the requests from the socks-to-rtc peer over WebRTC, passes the request to the destination webserver, and serves the response back to socks-to-rtc.

Obfuscation

WebRTC data channels are secured with DTLS.

An observer of the network traffic passing between two connected hosts can see that DTLS is in use; from this, they may infer that data channels are in use. We wish to make it difficult for an observer to detect the use of uProxy.

The SOCKS server can use the churn module to obfuscate its network traffic. churn configures WebRTC to pass its network traffic through a local network port which transforms the data prior to sending it over the internet; a port on the remote host is similarly configured to restoret the data to its original form prior to delivering it to the remote WebRTC peer.

utransformers is used to transform and restore the data being sent over the network.

Requirements

NPM, which may be installed as part of Node.js.
Grunt which may, once NPM has been installed, be installed with the command npm install -g grunt-cli

Building

Run setup.sh install to get dependencies (from npm, bower, and uproxy-lib tools)
Running grunt compiles all the TypeScript into JavaScript in the build/dev/ directory.
Run Jasmine tests with grunt test.

Usage

A variety of sample apps are included.

To run Chrome apps:

open chrome://extensions, ensure developer mode is enabled, and load unpacked extension from the relevant directory inside dist/samples/, e.g. dist/samples/simple-socks-chromeapp/.

To run Firefox add-ons:

download the Add-on SDK, and run the extension with cfx run from the relevant directory inside dist/samples/, e.g. dist/samples/echo-server-firefoxapp/.

echo server

echo-server-chromeapp starts a TCP echo server on port 9998.

Run telnet 127.0.0.1 9998 and then type some stuff to verify that echo server echoes what you send it.

Press ctrl-D to have the echo server terminate the connection or press ctrl-] then type quit to exit telnet.

simple SOCKS

simple-socks starts a SOCKS proxy on port 9999. socks-to-rtc and rtc-to-net both run in the same Chrome app, on the same machine, and communicate via direct function calls (no WebRTC datachannels).

To see debugging output, open the background page.

This command may be used to test the proxy:

curl -x socks5h://localhost:9999 www.example.com

(the -h indicates that DNS requests are made through the proxy too, i.e. not resolved locally)

You can also use an extension like SwitchyProxySharp to set Chrome's proxy settings and then just browse stuff.

copypaste SOCKS

copypaste-socks-chromeapp/ starts a SOCKS proxy on port 9999. One peer runs socks-to-rtc and the other runs rtc-to-net. The two peers may run on separate machines which may be located on separate private networks. Communication takes place via WebRTC datachannels and the peer-to-peer connection is established by exchanging signalling messages over some medium, e.g. email or, if the peers are on the same machine, copy and paste.

churn chat

These two samples, simple-churn-chat-chromeapp and copypaste-churn-chat-chromeapp, demonstrate how the churn module may be used to drive a two-way chat client.

They are roughly analagous to the simple- and copypaste- SOCKS

Wireshark may be used to verify that the traffic is obfuscated; the endpoints in use - along with a lot of debugging information - may be determined by examining the Javascript console.

simple turn

Demonstrates the simplest possible use of the turn-frontend and turn-backend modules.

turn-frontend is the module with which TURN clients directly interact:

                                                    +-------------+
                                                    |             |
                                                    |          ++ +------->
                    +-------------+                 |          ++ |
                    |             |                 |             |
TURN client +-----> | oo          | <-------------> |          ++ +------->
                    | oo          |      webrtc     |          ++ |
                    |             |                 |             |
                    +---+---------+                 |          ++ +------->
                    turn-frontend                   |          ++ |
                                                    |             |
                                                    +---+---------+
                                                    turn-backend

                      oo                              ++
                      oo server socket                ++ relay socket

The server may be used with standard TURN clients, e.g. the command-line tools from the rfc5766-turn-server suite:

Install the rfc5766-turn-server client utilities (apt-get install rfc5766-turn-server on Debian-like systems)
Open a terminal and execute turnutils_peer. This starts a UDP echo server on ports 3480 and 3481.
Open another terminal and execute turnutils_uclient -s -u test -w test -e 127.0.0.1 127.0.0.1 -p 9997

You should see a flurry of activity in the Chrome debugging console. On the command line, you will soon see a report. The output is not very user-friendly but the important parts are tot_send_msgs and tot_send_bytes. With the TURN server, echo server, and TURN client all running locally, you should not see any dropped packets. For more options, e.g. to open more channels or send larger datagrams, see the turnutils_uclient documentation.

Benchmarking

Build everything: 'grunt'
Load 'build/socks-server/samples/simple-socks-chromeapp' in chrome (it's an app) and run it.
Do these once:
- 'bin/make-data.sh' (probably works for linux only)
- 'npm install -g wup'
Run wup in data/: '(cd data ; wup) &'
Then, run the benchmark with 'npm run benchmark'

Android

Prerequisites

the ant build system.
the android-sdk
You will need android and adb on your PATH (add sdk/tools and sdk/platform-tools to your PATH environment variable)
You'll also need to install the various SDK support libraries which you can do with the android sdk command.
Configure an emulated Android device using the android avd command.
- So far tested on Ubuntu 14.04LTS using an emulated Nexus 4 device running Android L
- The device MUST be configured with an SD card and "Use Host GPU"

Building

grunt cca will build the project, create an Android APK, and install it onto the device. If no device is attached, the default Android emulator is used
adb forward tcp:19999 tcp:9999 will forward localhost:19999 to the emulator's port 9999.
- This is the SOCKS5 proxy
adb forward tcp:19998 tcp:9998 will forward localhost:19998 to the emulator's port 9998.
- telnet localhost 19998 is now the echo server on the device