yyp_jl v1.0.0

Renault Ddt2000 2.6.0.0 UPDATED

Renault Ddt2000 2.6.0.0 >>> https://shoxet.com/2tiArN

DDT 2000 works great with all models and the first problem, with which I have to fight with, is, that the I/O pins are not the same as the DDT2000. For me it is a bit more difficult to find out the correct pins, because the development board has a different wiring and I have to check where the pins are on the 15" LCD and the 16" LCD. The first idea was, to place the flags for the rest of the options on the 16" LCD, but this is not perfect. I used the flags on the right side, with the DDT2000, but on the left side on the development board. But they are the same pins.

This diagnostic software is compatible with various Renault, Dacia, Nissan and RSM cars. It allows for the detection and reading of all electronic control units, the reading of the VIN number, the detection of failures and the reading of diagnostic screen information. All communication is done via the COM or USB connection.

DDT2000 diagnostic interface for Renault Nissan Dacia supports the diagnosis of the module (airbag, ABS, automatic transmission, engine, air conditioning) are supported by all models with OBD2 diagnostic connector up to 2004 (Without CAN-BUS).

Works 100% on all Renault, Dacia, Nissan and Renault models since 2000. Win XP, Vista, Windows 7, Windows 8 and Windows 8.1. It supports head units: CDE 7, ZR2, CDE 7i/iL, CDE 8, EVO I, EVO II, EVO III (new before 2004 model)

As could be expected, there's a wide range of configuration options in DDT2000, many of which never used for a specific purpose. I guess those options will be left to be added over time. I could not find any notes, screenshots or videos about what each option is supposed to do. There are some comments here and there, but nothing substantial. Even worse, those comments are usually somewhat superficial or outdated. 84d34552a1