zjs-cli v0.0.1-1

zjs-cli - JavaScript CLI for Zephyr OS

Description

CLI tool for Zephyr OS allows you to connect and upload JavaScript code to a Zephyr board, directly from the command line.

Prerequisites

The ZJS development environment uses your host computer and Arduino 101 board.

• Ubuntu* 16.04 host.
• Arduino 101 board with ZJS IDE image.
• USB A-B cable for communications.

Initial Setup

Install dependencies

This tool uses libusb as a submodule, so you need libudev to build the module.

On Ubuntu:

$ sudo apt-get update
$ sudo apt-get install build-essential libudev-dev

Clone the git repo

git clone https://github.com/nagineni/zjs-cli.git

Installation

$ cd zjs-cli
$ npm install

Steps for setting up your Arduino 101:

See the ZJS project page for information on setting up your Arduino 101. https://github.com/01org/zephyr.js

Adding udev rules

Create udev rules to allow CLI tool to open the device and also prevent ModemManager interfering with that device by adding the following lines in /etc/udev/rules.d/99-arduino-101.rules

SUBSYSTEM=="tty", ENV{ID_VENDOR_ID}=="8086", ENV{ID_MODEL_ID}=="f8a1", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_CANDIDATE}="0"
SUBSYSTEM=="usb", ATTR{idVendor}=="8086", ATTR{idProduct}=="f8a1", MODE="0666" ENV{ID_MM_DEVICE_IGNORE}="1"

Then run this command:

$ sudo udevadm control --reload-rules

Usage

Plug the board into your computer and start the tool to connect and upload JS code to a Zephyr board

$ node zjs-cli.js -c -f test/HelloWorld.js

Command Line Options

The command line options

$ node zjs-cli.js -h

  Usage: zjs-cli -c -f <JavaScript file to upload>

  JavaScript CLI for Zephyr OS

  Options:

    -h, --help                    Output usage information
    -V, --version                 Output the version number
    -c, --connect                 Connect to the WebUSB device
    -d, --debug <level: 0 to 4>   Set the libusb debug level
    -l, --list                    List all connected USB devices
    -v, --vid <Vendor ID>         Vendor ID of the USB device
    -p, --pid <Product ID>        Product ID of the USB device
    -f, --file <JavaScript file>  JavaScript file to upload and execute
    -s, --save <JavaScript file>  Save file to device
    -w, --webusblist              List all connected WebUSB devices