Gladius-cli NPM

Gladius CLI

Command line interface to control the node daemon.

Installation

Node.js

Node.js provides a general installation guide here but we will walk through the installation for Windows, Ubuntu, and macOS.

We based this application off of the latest branch (9.9.0) at the time of this writing.

Here are some shortcuts to commands

Windows
- Download Installer, here
- Select the latest, 9.9.0+
Ubuntu
- curl -sL https://deb.nodesource.com/setup_9.x | sudo -E bash -
- sudo apt-get install -y nodejs
- Change Global Installation Directory
  - Our packages requires some dependencies that require superuser access if installed in the default Ubuntu paths. We recommend changing the default installation of global node modules to ~/.npm-global as stated in the npm.js docs. We included the commands below:
    - Run mkdir ~/.npm-global
    - Run npm config set prefix '~/.npm-global'
    - Add export PATH=~/.npm-global/bin:$PATH to your .profile of .zshrc file
    - Run source ~/.profile
  - Another option is to use NVM to handle permissions.
macOS
- Install Homebrew, instructions
  - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
  - brew install node

Git

Windows
- https://gitforwindows.org
Ubuntu
- apt-get install git
macOS
- Comes default with mac but can also be installed via Homebrew (brew install git)

Gladius CLI

Run npm install -g gladius-edge-daemon

Gladius Control Daemon

Run npm install -g gladius-control-daemon

Gladius Edge Daemon

Run npm install -g gladius-edge-daemon

Setup

Gladius Control Daemon

Run gladius-control to start the server

Expected Output:

$ gladius-control                                                                       
Running at http://localhost:3000

Leave this running in a new window for the CLI to communicate

Gladius Edge Daemon

Run gladius-edge to start the server

Expected Output:

$ gladius-edge                                                                       
Running - Use "gladius-node start" to start it

Leave this running in a new window for the CLI to communicate

Gladius CLI

Set up a local static IP for the machine you will be running the Gladius node on
Forward port 8080 on your router to that machine
Create a new Ethereum wallet
Acquire 1 Ether on the Ropsten testnet (or go here if you're using Metamask)
Run gladius-node init and fill out the requested information (use the same email that you applied for the beta with)

After you execute a command it will suggest the next logical command. For example, after init you can run gladius-node create to create a new Node. As of now the Node manager only supports 1 Node per user therefore if you run gladius-node create multiple times you will keep overwriting your current node.

The gladius-cli acts as an interface for a user to interact with the gladius-control-daemon and the gladius-edge-daemon. Therefore, if you want to use the CLI you must have both of the daemons running either in the background or on seperate terminal windows. Both daemons run servers on your machine once you start them. If you no longer want them to be running simply exit the window or stop the processes. This will stop the servers and if you want to use the CLI you'll have to start them again.

Commands

gladius-node <option>

init

Only needs to be run once after installation. Saves user information locally. If you want to change your local user information you can run this command and it will take you through the on-boarding process again.

$ gladius-node init
[Gladius-Node] What's your email? (So we can contact you about the beta):  test@mail.com
[Gladius-Node] What's your first name?  Marcelo
[Gladius-Node] Short bio about why you're interested in Gladius:  I want to contribute my bandwidth to the Gladius Network!
[Gladius-Node] Please make a new ETH wallet and paste your private key (include 0x at the beginning):   
[Gladius-Node] Please enter a passphrase for your new PGP keys:   
[Gladius-Node] User profile created! You may create a node with gladius-node create
[Gladius-Node] If you'd like to change your information run gladius-node init again

create

Create and deploy a Node smart contract. You only need 1 per computer. If you create a new Node it will disconnect you from your previous one.

$ gladius-node create
[Gladius-Node] Please enter the passphrase for your PGP private key:  
[Gladius-Node] Creating Node contract, please wait for tx to complete (this might take a couple of minutes)
[Gladius-Node] Transaction: 0xe313b53a099addd8619f645ace76af2ddf9b4dae3e9c5ab307f2999cceb861a6	[Success]
[Gladius-Node] Setting Node data, please wait for tx to complete (this might take a couple of minutes)
[Gladius-Node] Transaction: 0x1f50a8fb77974c3543b977e42b96d0e5aa7d257ef6b7d5d98a38f7fcc3b95ffc	[Success]
[Gladius-Node] Node successfully created and ready to use
[Gladius-Node] Use gladius-node apply to apply to a pool

apply

Apply to a pool. Enter the pool address and an application with all of your data will be sent to them. This information includes your name, email, bio, ip address, and node contract address. Do not apply to pools that you don't trust.

$ gladius-node apply
[Gladius-Node] Please enter the passphrase for your PGP private key:  
[Gladius-Node] Please enter the address of the pool you want to join:   0x2E27eE682C14f02daa106E8f659Ed8235ef11332
[Gladius-Node] Transaction: 0x6f33237e886b1d89f69df375fc541cfe0f2b12dc9f22a9df65047c820555f8b9	[Success]
[Gladius-Node] Application sent to Pool!
[Gladius-Node] Use gladius-node check to check your application status

check

Check the status of your application to a particular pool.

$ gladius-node check
[Gladius-Node] Please enter the address of the pool you want to check on:   0x2E27eE682C14f02daa106E8f659Ed8235ef11332
[Gladius-Node] Pool: 0x2E27eE682C14f02daa106E8f659Ed8235ef11332	[Application Status: Pending]
[Gladius-Node] Wait until the pool manager accepts your application in order to become an edge node

status

Check the status of the Gladius Control Daemon and Gladius Edge Daemon

$ gladius-node status
[Gladius-Node] Gladius Control Daemon server is running!
[Gladius-Node] Gladius Edge Daemon running, you are an edge node!
[Gladius-Node] If you'd like to stop, run gladius-node stop

start

Starts the edge node networking. You can call this to become an edge node after you've been accepted to a pool. If you call this without being accepted to a pool first your server will be running but no one will be able to connect to your machine since you are not part of a pool.

$ gladius-node start
[Gladius-Node] Gladius Edge Daemon running, you are now an edge node!
[Gladius-Node] If you'd like to stop, run gladius-node stop

stop

Stops the edge node networking. You can call this to stop serving content.

$ gladius-node stop
[Gladius-Node] Gladius Edge Daemon is not running
[Gladius-Node] If you'd like to start, run gladius-node start

gen-keys

Generate a new pair of PGP keys and a new passphrase. This happens during the init process but you can run this again if you forget your passphrase or want to generate new keys for any reason. After this you should do gladius-node update-node to update the information on your node contract with your new PGP keys

$ gladius-node gen-keys   
[Gladius-Node] Please enter a passphrase for your new PGP keys:   
[Gladius-Node] New PGP keys generated
[Gladius-Node] Please run gladius-node update-node to update the information on your node contract

update-node

Overwrites your current node information (that was set upon initial creation of your node contract) with your current user data

$ gladius-node update-node
[Gladius-Node] Please enter the passphrase for your PGP private key:  
[Gladius-Node] Transaction: 0xdeee16ac02f0e2080d91fdb3dd982dd78350b664eddf553d0ba902dbb54c0178	[Success]
[Gladius-Node] Node information successfully update

settings

Displays the information that the gladius-control-daemon is using

{ running: true,
  privateKey: '0x1234567890123456789012345678901234567890123456789012345678901234',
  address: '0xE9F75E329292758c2a77f30967304cD749a88837',
  marketAddress: '0x0cd8d142238554acb52b17c9243baf6938ee3214',
  nodeFactoryAddress: '0xfb834903bcdc3ab0a2409629e3c9303e6c567a40',
  providerUrl: 'https://ropsten.infura.io/tjqLYxxGIUp0NylVCiWw',
  endpoints: { start: 'http://localhost:3000/api/settings/start' }}

reset

Manually wipe your local user profile. If you want to purge your user profile from your local machine run this.

$ gladius-node reset
[Gladius-Node] User data has been reset

--help

Brings up the help menu.

Notes and warnings

Warning! This is the beta implementation of the Gladius node. Please create a new ETH wallet before using this. Pools that you apply to will receive your name, email, bio, ip address, and node contract address. Therefore, do not apply to pools that you do not trust. At this time Gladius is running 1 official pool that is closed to the public and will not be advertised. If you choose to join an independent pool not run by Gladius, that is at your own risk. Gladius is not responsible for your data getting into the wrong hands. Use at your own risk.