homebridge-foscamcamera v0.3.1

homebridge-foscamcamera

Foscam Plugin (Camera, Security System, Motion Sensor) for HomeBridge (API 2.1)

Older verion using API 1.0: homebridge-foscam Older verion using API 2.0: homebridge-foscam2 (deprecated)

Due to protocol limitation, users will need to pair with the camera in a HomeKit app separately. Pairing PIN is the same as the HomeBridge pairing PIN.

Prerequisites

1. Node.js v6.6.0 or above
2. HomeBridge v0.4.6 or above
3. FFmpeg
4. Only H.264 cameras are supported.

Installation

1. Install homebridge using npm install -g homebridge.
2. Install this plugin using npm install -g homebridge-foscamcamera.
3. Update your configuration file. See configuration sample below.

Configuration

Edit your config.json accordingly. Configuration sample:

"platforms": [{
    "platform": "FoscamCamera",
    "name": "Foscam",
    "cameras": [{
        "username": "admin",
        "password": "password",
        "host": "192.168.1.10",
        "port": 88,
        "stay": 13,
        "away": 15,
        "night": 14,
        "armPreset": "Start",
        "disarmPreset": "LeftMost",
        "sensitivity": 2,
        "triggerInterval": 5,
        "videoConfig": {
            "source": "-re -i rtsp://myfancy_rtsp_stream",
            "stillImageSource": "-i http://faster_still_image_grab_url/this_is_optional.jpg",
            "maxStreams": 2,
            "maxWidth": 1280,
            "maxHeight": 720,
            "maxFPS": 30
        }
    }]
}]

*stay, away, night define configuration for different ARMED state. **reference homebridge-camera-ffmpeg for configuration instructions.

The supported configurations depend on your device. The Foscam public CGI defines the following: bit 3 | bit 2 | bit 1 | bit 0 bit 0 = Ring bit 1 = Send email bit 2 = Snap picture bit 3 = Record

The following seems to be valid for the C2 as well (not found in any documentation) bit 7 | bit 6 | bit 5 | bit 4 | bit 3 | bit 2 | bit 1 | bit 0 bit 0 = Ring bit 1 = Send email bit 2 = Snap picture bit 3 = Record bit 7 = Push notification

Note: The configuration is defined as int, thus the followings are valid, e.g. 0 (Do Nothing), 1 (Ring), 2 (Email), 3 (Ring + Email), 4 (Picture), 12 (Picture and Record), 13 (Ring, Picture and Record), etc.

P.S.: Any ARMED state will activate motion detection by default.