homebridge-mqtt-gpio v0.0.17

homebridge-mqtt-gpio

Homebridge-mqtt-gpio is a Plugin for Homebridge. The base is almost all on homebridge-mqtt. Please check their awesome work.

The motivation to do this is to add accessories that work exclusively with raspberry gpio dynamically.

The idea is to provide a bridge to add and control accessories with a mqtt API.

Node-RED is the perfect platform to use with homebridge-mqtt-gpio.

Note-RED is a visual tool for wiring together hardware devices, APIs and online services.

TODO

• ~~Add long lasting pi config - it vanishes at reboot ~~
• ~~Add GPIO functionality :) ~~
• Add functionality for more than just switches and lamps.
• Add functionality for pulse, defining timing too.

Installation

If you are new to Homebridge, please first read the Homebridge documentation.

If you are running on a Raspberry, you will find a tutorial in the homebridge-punt Wiki.

Install homebridge:

sudo npm install -g homebridge

Install homebridge-mqtt-gpio:

sudo npm install -g homebridge-mqtt-gpio

Make sure rpio in working too

Configuration

Add the mqtt-platform in config.json in your home directory inside .homebridge.

{
  "platform": "mqtt",
  "name": "mqtt",
  "url": "mqtt://127.0.0.1",
  "topic_type": "multiple",
  "topic_prefix": "homebridge",
  "username": "foo",
  "password": "bar",
  "cert": "/path/to/certificate.pem",
  "key": "path/to/key.pem",
  "ca": "/path/to/ca_certificate.pem"
}

Replace 127.0.0.1 with the ip-address of your mqtt broker.

Note:

topic_type multiple: the data is sent to all devices, e.g.

topic : homebridge/from/set

topic_type single: the data is sent to a single device, the accessory name is added to the topic, e.g.

topic : homebridge/from/set/flex_lamp

mqtt GPIO API

You can add a new accessory like this:

add accessory

Note: for GPIO functionality you can only add the following services:

• Switch
• Lightbulb
• Outlet

topic: homebridge/to/add
payload: {"name": "flex_lamp", "service_name": "light", "service": "Switch"}

the response should be:

topic: homebridge/from/response
payload: {"ack": true, "message": "accessory 'flex_lamp' service_name 'light' is added."}

Then to add GPIO functionality you have to have the characteristic: Note: an accessory with the same name and service_name must be added before.

topic: homebridge/to/set
payload: {"name": "lights", "service_name": "teste", "characteristic": "GPIOPin",  "value": "[35]"}

The GPIO values has to be a valid JSON String. It can also contain multiple GPIOs, like "[35,37]"

GPIO numering is based on physical GPIOs only P1 - P40

You can already test your accessory with your iOS device or using the mqtt API to change the state of your accessory.

You can also add the characteristic GPIOPinInverted if needed: Note: an accessory with the same name and service_name must be added before.

topic: homebridge/to/set
payload: {"name": "lights", "service_name": "teste", "characteristic": "GPIOPinInverted",  "value": true}

There's no response from homebridge/to/set, but you can check the current setting with homebridge/to/get, please check bellow for the HOWTO

mqtt API

The data (payload) is sent/received in a JSON format using following topics:

• homebridge/to/add
• homebridge/to/add/service
• homebridge/to/remove
• homebridge/to/remove/service
• homebridge/to/get
• homebridge/to/set
• homebridge/to/set/reachability
• homebridge/to/set/accessoryinformation
• homebridge/from/get
• homebridge/from/set
• homebridge/from/response
• homebridge/from/identify

Version 0.3.0 and higher supports multliple services. To handle multiple services a new property service_name has been introduced.

Note: To add a service to an existing accessory (created prior version 0.3.0) please first remove the accessory and add it again.

Howto examples

add service

Note: an accessory with the same name must be added before.

topic: homebridge/to/add/service
payload: {"name": "multi_sensor", "service_name": "humidity", "service": "HumiditySensor"}

response:

topic: homebridge/from/response
payload: {"ack": true, "message": "service_name 'humidity', service 'HumiditySensor' is added."}

remove accessory

topic: homebridge/to/remove
payload: {"name": "flex_lamp"}

response:

topic: homebridge/from/response
payload: {"ack": true, "message": "accessory 'flex_lamp' is removed."}

remove service

topic: homebridge/to/remove/service
payload: {"name": "multi_sensor", "service_name": "humidity"}

response:

topic: homebridge/from/response
payload: {"ack": true, "message": "accessory 'multi_sensor' service_name 'humidity' is removed."}

get accessory/accessories

The purpose of this topic is to retrieve accessory configurations. Use homebridge/from/set to control your devices.

topic: homebridge/to/get
payload: {"name": "outdoor_temp"}

homebridge sends the accessory configuration:

topic: homebridge/from/response
payload:
{
  "outdoor_temp": {
    "services": {
      "Temperature": "TemperatureSensor"
    },
    "characteristics": {
      "Temperature": {
        "CurrentTemperature": 13.4
      }
    }
  }
}

topic: homebridge/to/get
payload: {"name": "*"}

homebridge sends all accessory configurations:

topic: homebridge/from/response
payload:
{
  "node_switch": {
    "services": {
      "light": "Switch"
    },
    "characteristics": {
      "Light": {
        "On": true
      }
    }
  },
  "office_lamp": {
    "services": {
      "office_light": "Lightbulb"
    },
    "characteristics": {
      "office_light": {
        "On": "blank",
        "Brightness": 65
      }
    }
  },
  "living_temp": {
    "services": {
      "living_temperature": "TemperatureSensor"
    },
    "characteristics": {
      "living_temperature": {
        "CurrentTemperature": 19.6
      }
    }
  }
}

set value (to homebridge)

topic: homebridge/to/set
payload: {"name": "flex_lamp", "service_name": "light", "characteristic": "On", "value": true}

get value (from homebridge)

topic: homebridge/from/get
payload: {"name": "flex_lamp", "service_name": "light", "characteristic": "On"}

Homebridge-mqtt will return the cached value to HomeKit. Optionally you can publish the actual value using homebridge/to/set.

set value (from homebridge)

topic: homebridge/from/set
payload: {"name": "flex_lamp", "service_name": "light", "characteristic": "On", "value": true}

set reachability

topic: homebridge/to/set/reachability
payload: {"name": "flex_lamp", "reachable": true}
or
payload: {"name": "flex_lamp", "reachable": false}

set accessory information

topic: homebridge/to/set/accessoryinformation
payload: {"name": "flex_lamp", "manufacturer": "espressif", "model": "esp8266-12", "serialnumber": "4711", "firmwarerevision": "1.1.0"}

identify accessory

topic: homebridge/from/identify
payload: {"name":"indoor_temp","manufacturer":"homebridge-mqtt","model":"v0.3.0","serialnumber":"2017-02-13T12:17"}

define characterstic

The required characteristics are added with the default properties. If you need to change the default, define the characteristic-name with the properties. e.g.:

topic: homebridge/to/add
payload:
  {
    "name": "living_temp",
    "service_name": "temperature",
    "service": "TemperatureSensor",
    "CurrentTemperature": {"minValue": -20, "maxValue": 60, "minStep": 1}
  }

To add an optional charachteristic define the characteristic-name with "default" or with the properties. e.g.:

topic: homebridge/to/add
payload: 
  {
    "name": "living_lamp",
    "service_name": "light",
    "service": "Lightbulb",
    "Brightness": "default"
  }

topic: homebridge/to/add
payload:
  {
    "name": "bathroom_blind",
    "service_name": "blind",
    "service": "WindowCovering",
    "CurrentPosition": {"minStep": 5},
    "TargetPosition": {"minStep": 5},
    "CurrentHorizontalTiltAngle": {"minValue": 0, "minStep": 5},
    "TargetHorizontalTiltAngle": {"minValue": 0, "minStep": 5}
  }

HomeKitTypes.js describes all the predifined Services, Characteristcs, format and properties for the value e.g.:

/**
 * Service "Contact Sensor"
 */

Service.ContactSensor = function(displayName, subtype) {
  Service.call(this, displayName, '00000080-0000-1000-8000-0026BB765291', subtype);

  // Required Characteristics
  this.addCharacteristic(Characteristic.ContactSensorState);

  // Optional Characteristics
  this.addOptionalCharacteristic(Characteristic.StatusActive);
  this.addOptionalCharacteristic(Characteristic.StatusFault);
  this.addOptionalCharacteristic(Characteristic.StatusTampered);
  this.addOptionalCharacteristic(Characteristic.StatusLowBattery);
  this.addOptionalCharacteristic(Characteristic.Name);
};

/**
 * Characteristic "Contact Sensor State"
 */

Characteristic.ContactSensorState = function() {
  Characteristic.call(this, 'Contact Sensor State', '0000006A-0000-1000-8000-0026BB765291');
  this.setProps({
    format: Characteristic.Formats.UINT8,
    perms: [Characteristic.Perms.READ, Characteristic.Perms.NOTIFY]
  });
  this.value = this.getDefaultValue();
};

inherits(Characteristic.ContactSensorState, Characteristic);

Characteristic.ContactSensorState.UUID = '0000006A-0000-1000-8000-0026BB765291';

// The value property of ContactSensorState must be one of the following:
Characteristic.ContactSensorState.CONTACT_DETECTED = 0;
Characteristic.ContactSensorState.CONTACT_NOT_DETECTED = 1;

Derived from this:

service = ContactSensor
characteristic = ContactSensorState
format = UINT8
property = 0 or 1

Node-red example

For more examples take a look at the wiki