hrp v0.0.7

hrp (HID Robot Protocol)

Module that implements a protocol for talking to robots over a HID-USB communication

Install

npm install hrp

Use

var HRP = require('hrp');

var robot_handler = HRP('USB_PATH','PORT_IF_VIRTUAL','ONLY_DEFS');

Where:

• USB_PATH is the path to the device (XXXX:XXXX:XX) or 'virtual'
• PORT_IF_VIRTUAL is the port used when talking to a virtual robot
• ONLY_DEFS is true if you want only the protocol definitions and helper functions

Protocol

Generalities

• Every frame must start and finish with :
• Every frame must have the preamble :HRP
• The isssued command follows the preamble
  • Get: G
  • Set: S
  • Get All: GA
  • Set All: SA
• The target device follows the command
  • Robot: R
  • Joint(s): J
  • End Effector: EE
• The target property follows the device
  • Info: INFO
  • Value: V
• Every part of the frame is followed by :
• Arrays items are separated by ,
• Decimal point is actually a point 1.23
• The robot must ACK the received Set command even if it can not complete the operation (e.g., move the end effector to desired position)
• The robot must not ACK the received Get command, it should only send the requested information
  • ACK: A
  • Compliance ACK: CA
• The robot should send the following general information when asked to:
  • Brand (string) (B)
  • Model (string) (M)
  • Degrees of Freedom (positive integer) (DOF)
  • Joints' IDs (array of positive integers between 0 and 999) (J)
• The robot should send the following information about a joint when asked to:
  • Joint Type (string, e.g., 'R', 'T') (J_TYPE)
  • Joint Description (string, e.g., 'Stepper Motor') (J_DESC)
  • Joint Range (array of floating point numbers, e.g., 0 23.4 formatted as ':0.00,23.40:') (J_RANGE)
  • Joint Units (string, e.g., 'deg','rad','mm') (J_UNITS)

Specifics

• HRP-Compliance ACK frame
  • Q: :HRP:CA: -- A: :HRP:CA:
• Get the robot information
  • Q: :HRP:G:R:INFO: -- A: :HRP:G:R:INFO:info_string:
  • (info_string can be obtained with the function HRP.robotInfo2str(info)
  • (the info can be converted to an object with the function HRP.str2robotInfo(str)
• Get the joint information
  • Q: :HRP:G:J:INFO: -- A: :HRP:G:J:INFO:info_string:
  • (info_string can be obtained with the function HRP.robotInfo2str(info)
  • (the info can be converted to an object with the function HRP.str2robotInfo(str)
• Get a joint value
  • Q: :HRP:G:J:V:id: -- A: :HRP:G:J:id:value:
  • (id is an integer between 0 and 999, formatted as 000-999)
  • (value is a number with two decimal places. It must contain the two decimal places, as in 1.00)
• Get all joints values
  • Q: :HRP:GA:J:V: -- A: :HRP:GA:J:id1:value1: ... idn:valuen:
• Set the end effector value (position)
  • Q: :HRP:S:EE:V:x_pos:y_pos:z_pos: -- A: :HRP:A:S:EE:V:
  • (work TODO: set also the orientation)
• Set the end effector value (differential position)
  • Q: :HRP:S:EED:V:x_pos:y_pos:z_pos: -- A: :HRP:A:S:EED:V:
  • (work TODO: set also the orientation)
• Set a joint value (position, angle, etc)
  • Q: :HRP:S:J:V:id:value: -- A: :HRP:A:S:J:V:id
  • (id is an integer between 0 and 999, formatted as 000-999)
  • (value is a number with two decimal places. It must contain the two decimal places, as in 1.00)

Example of information string

• Q: :HRP:G:R:INFO -- A: :HRP:G:R:INFO:B:MY_BRAND:M:MODEL_A:DOF:2:J:012,056:
• Q: :HRP:G:J:INFO:012 -- A: :HRP:G:J:INFO:012:J_TYPE:R:J_DESC:CC_MOTOR:J_RANGE:0.00,180.00:J_UNITS:deg:
• Q: :HRP:G:J:INFO:056 -- A: :HRP:G:J:INFO:056:J_TYPE:T:J_DESC:STEPPER_MOTOR:J_RANGE:0.00,20.00:J_UNITS:mm:

• The order of the fields are not important because they are stored in an object.

...to be continued

Note

Version 0.1.0 will respond to this specification. Work in progress.