matterbridge-ecovacs-yeedi

matterbridge-ecovacs-yeedi

A Matterbridge plugin that bridges Yeedi and Ecovacs robot vacuums into Matter, so they can be controlled from Home Assistant, Apple Home, Google Home, Amazon Alexa, and any other Matter controller.

This is a fork of bubez81/matterbridge-ecovacs with added Yeedi support and a number of fixes for reliable operation in Home Assistant.

---

Features

• Battery level, charging state, and voltage
• Operational state — Docked, Running, Paused, Returning to dock, Charging
• Operational errors — wheels jammed, brush jammed, navigation sensor obscured, low battery, and more, mapped to Matter error states
• Clean mode selector — Vacuum, Mop, Vacuum and Mop, Vacuum then Mop
• Consumable life sensors — Filter, Main Brush, and Side Brush remaining life (%)
• Empty Dust Bin switch — trigger the auto-empty dock
• Clean Completed switch — turns on when a cleaning run finishes and the robot returns to the dock (useful for automations)
• Room / segment cleaning via service call
• Start / Pause / Stop / Return to dock commands

---

Requirements

• A working Matterbridge installation (v3.x)
• Node.js >= 20.19.0
• A Yeedi or Ecovacs account with your robot already set up in the official app

---

Installation

Via the Matterbridge UI (recommended)

1. Open the Matterbridge web interface
2. Go to the plugins section and choose to install a plugin
3. Enter the package name:

   matterbridge-ecovacs-yeedi

4. Install, then configure it (see below) and restart Matterbridge

Via the command line

npm install -g matterbridge-ecovacs-yeedi
matterbridge -add matterbridge-ecovacs-yeedi

---

Configuration

Configure the plugin in the Matterbridge UI, or in your Matterbridge config file.

Option	Description	Example
email	Your Yeedi/Ecovacs account email	you@email.com
password	Your account password	********
countryCode	Two-letter country code for your account	US
authDomain	yeedi.com for Yeedi robots, leave blank/ecovacs.com for Ecovacs	yeedi.com
pollingInterval	How often (seconds) to poll the robot for status	15
rooms	Optional list of room/segment names for segment cleaning	see below

Yeedi users: set authDomain to yeedi.com. This is required for the robot to authenticate and for map/room data to load correctly.

Example

{
  "email": "you@email.com",
  "password": "your-password",
  "countryCode": "US",
  "authDomain": "yeedi.com",
  "pollingInterval": 15,
  "rooms": ["Living Room", "Kitchen", "Bedroom"]
}

---

Room / segment cleaning

Home Assistant's Matter vacuum card does not currently render a visual room picker, but segment cleaning works through a service call:

service: vacuum.send_command
target:
  entity_id: vacuum.yeedi_vac_robot
data:
  command: app_segment_clean
  params:
    segments: [0, 2]   # the room/segment IDs you want to clean

---

Using the "Clean Completed" switch in automations

The Clean Completed switch turns on only after the robot has actually cleaned and then returned to the dock with no error. It turns off when a new run starts. This makes daily-run automations safe against double-triggering:

alias: Daily Yeedi Clean
trigger:
  - platform: time
    at: "10:00:00"
condition:
  - condition: state
    entity_id: sensor.yeedi_vac_robot_operational_state
    state: "docked"
action:
  - service: switch.turn_off
    target:
      entity_id: switch.yeedi_vac_robot_clean_completed
  - service: vacuum.start
    target:
      entity_id: vacuum.yeedi_vac_robot

---

Tested hardware

• Yeedi Vac Pro — fully tested

Other Yeedi and Ecovacs/Deebot models may work since they share the same backend, but have not all been individually verified. Reports welcome.

---

Troubleshooting

• Robot won't connect: double-check email, password, countryCode, and that authDomain is yeedi.com for Yeedi robots.
• Rooms not loading: room/map data loads a few seconds after connecting; give it a moment after a restart.
• Plugin reverts after a restart: make sure you installed from npm (not a one-off local file) so Matterbridge can reinstall it on container rebuilds.

---

Changelog

Recent releases (see CHANGELOG.md for the full history):

• 1.1.5 — Matterbridge 3.10.0 compatibility (onOffSwitch was renamed to onOffLightSwitch). Targets 3.10.0+; use 1.1.4 if still on 3.8.x.
• 1.1.4 — Removed the spurious "Power-on behavior" dropdown on the Empty Dust Bin and Clean Completed switches under Matterbridge 3.8.0.
• 1.1.3 — Matterbridge 3.8.0 (Matter 1.5.1) compatibility. Fixes the child sensors (Filter/Brush life, Empty Dust Bin, Clean Completed) disappearing after the 3.8.0 update. Builds against both 3.8.0 and 3.7.10.
• 1.0.9 — Added full README / npm page documentation.
• 1.0.8 — Added the "Clean Completed" switch for safe daily automations.
• 1.0.x — Initial Yeedi support: battery, operational state, error mapping, clean modes, consumable life sensors, empty dust bin, and room cleaning.

Credits

• Built on top of bubez81/matterbridge-ecovacs
• Uses the ecovacs-deebot.js library
• Runs on Matterbridge by Luligu

---

License

Apache-2.0